DSE-E400 DSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 EMAIL sales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com DEEP SEA ELECTRONICS INC USA
3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +1 (815) 316 8706 EMAIL usasales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457 SPECIFICATIONS DC SUPPLY CONTINUOUS VOTLAGE RATING
8 V to 32 V continuous
Able to survive 0 V for 100 ms, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. MAXIMUM OPERATING CURRENT 326 mA at 12 V, 164 mA at 24 V MAXIMUM STANDBY CURRENT 119 mA at 12 V, 60 mA at 24 V MAXIMUM OFF MODE CURRENT 76 mA at 12 V, 38 mA at 24 V CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
Configurable as: Positive switching Negative switching ANALOGUE INPUT A to G Configurable as: Negative switching digital input
0 V to 10 V
DC OUTPUT A (FUEL) & B (START)
10 A DC for 10 seconds
5 A DC continuous at supply voltage
DC OUTPUTS C & D
2 A DC at supply voltage
PWMi OUTPUTS E & F
4 A at supply voltage
20 Hz to 250 Hz
0.5 V to 60 V RMS
5 Hz to 10,000 Hz
0 V to 10 V range
1000 Ω minimum load impedance CURRENT OUTPUT 0 to 20 mA range 500 Ω maximum load impedance DIMENSIONS OVERALL 189 mm x 125 mm x 54 mm 7.5” x 4.9” x 2.1” PANEL CUTOUT 148 mm x 112 mm 5.8” x 4.4” OPERATING TEMPERATURE RANGE -30 °C to +80 °C -40 °C to +80 °C with heated display option STORAGE TEMPERATURE RANGE -40 °C to +85 °C RELATED MATERIALS TITLE PART NO. DSEE400 Installation Instructions 053-180 DSEE400 Operator Manual 057-252 DSEE400 PC Configuration Suite Manual 057-251 KEY FEATURES
- Sensor alarm levels adjustable in front panel editor
- PLC hour timer
- Maintenance alarms (10)
- Auto run inhibit feature
- Configurable CAN
- Built-in governor control
- Automatic speed control
- Fill, empty, maintain fill and maintain empty control
- Manual speed control via push buttons, digital input or analogue input
- Automatic speed ramping
- Flexible automatic start control
- Clutch control
- LCD text display
- Multiple display languages
- Two-key menu navigation
- Front panel editing with PIN protection
- Customisable status screens
- Customisable multi instrumentation screens
- Configurable digital inputs (4)
- Configurable analogue inputs (7)
- Configurable DC outputs (2)
- Configurable PWM/PWMi outputs (2)
- Configurable analogue output (1)
- Configurable timers and alarms
- 3 configurable maintenance alarms
- Multiple date and time engine scheduler
- Configurable event log (250)
- CAN engine support
- CAN, magnetic pick-up or tachometer speed sensing
- Fuel usage monitor and low fuel alarms
- Charge alternator failure alarm
- “Protections disabled” feature
- LCD alarm indication
- Low power mode
- USB connectivity
- Backed-up real time clock
- Fully configurable via DSE Configuration Suite PC software
- Configurable display languages
- Remote SCADA monitoring via DSE Configuration Suite PC software
- Modbus RTU support by configurable RS485 port KEY BENEFITS
- 132 x 64 pixel ratio display for clarity
- Real-time clock provides accurate event logging
- Set maintenance periods can be configured to maintain optimum engine performance
- Can be integrated into remote monitoring systems
- Licence-free PC software
- Uses DSE Configuration Suite PC Software for simplified configuration
- IP67 rating offers increased resistance to water ingress
- User friendly set-up and button layout for ease of use
- Compatible with a wide range of CAN engines
- Fill, empty, maintain fill and maintain empty control 055-202/12/20 (2) DSEControl®
ENVIRONMENTAL TESTING STANDARDS ELECTRO MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068 Ab/Ae Cold Test -30 oC BS EN 60068-2-2 Bb/Be Dry Heat +70 oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz at +/-7.5 mm, 8 Hz to 500 Hz at 2 gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 oC at 95% RH
48 Hours
Cab Damp Heat Static 40 oC at 93% RH Three shocks in each of three major axes 15 gn in 11 ms DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP67. The DSEE400 is an easy to use engine controller designed to provide flexible control with built in monitoring and protection. The DSEE400 is compatible with both electronic and mechanical diesel engines. It is fully configurable for a wide range of applications such as engine driven pumps and compressors. All of the engine control functions, including the engine start, speed and clutch control can be achieved both automatically & manually. The monitoring and configuration of the system variables allows the DSEE400 to start and stop the engine and increase and decrease engine speed as the output demand requires. On board event, data logging and trending makes it possible to determine preventative maintenance and improved performance criteria for the machine. The DSE Configuration Suite PC Software is used to easily make adjustments to the operating parameters, sequences, timers and alarms. Reducing valuable development and commissioning time RELATED PARTS TITLE PART NO. Deutsch connector A (DT16-18SA-K004), 18 way complete with pins 007-850 Deutsch connector C (DT16-18SC-K004), 18 way complete with pins 007-851 Set of 2 harnesses, A & C connectors, pre-wired, 1.2 m, cables marked. 007-852 DSEControl® CONNECTOR C ISO 9001 Registered Quality Management 015