DSC7003 PANASONIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Ver. DED This product complies with the RoHS Directive (EU 2002/95/EC). Publication date: May 2012 1 DSC7003 Silicon NPN epitaxial planar type For low frequency output amplification Complementary to DSA7003 DSC8003 in MiniP3 type package Features Low collector-emitter saturation voltage VCE(sat) Contributes to miniaturization of sets, reduction of component count. Eco-friendly Halogen-free package Packaging DSC7003×0L Embossed type (Thermo-compression sealing): 1000 pcs / reel (standard) Absolute Maximum Ratings Ta = 25°C Parameter Symbol Rating Unit Collector-base voltage (Emitter open) VCBO 60 V Collector-emitter voltage (Base open) VCEO 50 V Emitter-base voltage (Collector open) VEBO 5 V Collector current IC 1 A Peak collector current ICP 1.5 A Collector power dissipation PC 1 W Junction temperature Tj 150 °C Storage temperature Tstg –55 to +150 °C Note) Printed circuit board: Copper foil area of 1 cm2 or more, and the board thickness of 1.7 mm for the collector portion Absolute maximum rating without heat sink for PC is 0.5 W Electrical Characteristics Ta = 25°C±3°C Parameter Symbol Conditions Min Typ Max Unit Collector-base voltage (Emitter open) VCBO IC = 10 mA, IE = 0 60 V Collector-emitter voltage (Base open) VCEO IC = 2 mA, IB = 0 50 V Emitter-base voltage (Collector open) VEBO IE = 10 mA, IC = 0 5 V Collector-base cutoff current (Emitter open) ICBO VCB = 20 V, IE = 0 0.1 mA Forward current transfer ratio *1 hFE1 *2 VCE = 10 V, IC = 500 mA 120 340 hFE2 VCE = 5 V, IC = 1 A 50 Collector-emitter saturation voltage *1 VCE(sat) IC = 500 mA, IB = 50 mA 0.15 0.4 V Base-emitter saturation voltage *1 VBE(sat) IC = 500 mA, IB = 50 mA 0.9 1.2 V Transition frequency fT VCE = 10 V, IC = 50 mA 170 MHz Collector output capacitance (Common base, input open circuited) Cob VCB = 10 V, IE = 0, f = 1 MHz 10 20 pF Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *1: Pulse measurement *2: Rank classification Code R S 0 Rank R S No-rank hFE1 120 to 240 170 to 340 120 to 340 Marking Symbol 5AR 5AS 5A Product of no-rank is not classified and have no marking symbol for rank. Package Code MiniP3-F2-B Package dimension clicks here.→ Pin Name 1. Base 2. Collector 3. Emitter Marking Symbol: 5A
Ver. DED This product complies with the RoHS Directive (EU 2002/95/EC). DSC7003 PC Ta IC VCE hFE IC VCE(sat) IC IC VBE Cob VCB 0 20016040 12080 250 1 000 750 500 1 250 DSC7003_PC-Ta Ambient temperature Ta (°C) Collector power dissipation PC (mW) 0 122 104 8 6 1 200 1 000 800 600 400 200 DSC7003_IC-VCE Collector current IC (mA) Collector-emitter voltage VCE (V) Ta = 25°C IB = 8 mA 7 mA 6 mA 5 mA 4 mA 3 mA 2 mA 1 mA 300 250 200 150 100 10 102 103 DSC7003_hFE-IC Forward current transfer ratio hFE Collector current IC (mA) 25°C −30°C Ta = 85°C 0.01 0.1 0.1 1 1 0 100 DSC7003_VCEsat-IC Collector-emitter saturation voltage VCE(sat) (V) Collector current IC (mA) 25°C −30°C Ta = 85°C IC / IB = 10 1 200 1 000 800 600 400 200 DSC7003_IC-VBE Collector current IC (mA) Base-emitter voltage VBE (V) −30°C 25°C Ta = 85°C VCE = 10 V 10 100 DSC7003_Cob-VCB Collector-base voltage VCB (V) Collector output capacitance (Common base, input open circuited) Cob (pF) IE = 0 f = 1 MHz Ta = 25°C fT IC 250 200 150 100 10 102 103 DSC7003_fT-IC Transition frequency fT (MHz) Collector current IC (mA) VCE = 10 V Ta = 25°C
Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or im- provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202