DS9094SM_07 DALLAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Surface-Mount iButton Clip www.maxim-ic.com
FEATURES
Compact Single-Piece, All-Metal Clip for i button® Mounting Lowest Profile i Button Mount Made from 0.25mm Thick Tin-Plated Phosphor Bronze Withstands High Temperatures Required for Surface Mounting Can be Soldered, Riveted, or Screw-Mounted Compatible with Leaded and Lead-Free Solder Processes Available for F3 and F5 i Button
ORDERING INFORMATION
DS9094SM3+ Clip for F3 i Button DS9094SM5+ Clip for F5 i Button MOUNTING PAD LAYOUT Data pad Ø 13.97 6.35
5.72 Ground
29.36 Keep-out area Ø 19.05 DS9094SM3 DS9094SM5 4.81 4.01 Hole centered ∅ 2.35 28.09 ± 0.38 17.575.08 Hole centered ∅ 2.35 28.09 ± 0.38 17.575.08 4.81 6.81 All dimensions are in millimeters.
DESCRIPTION
The DS9094SM is a low-cost, surface- mount device that retains a 16.3mm i Button on a printed circuit board. Two springs that double as ground contacts press the i Button to the data pad on the printed circuit board. The i Button can be inserted and extracted without special tools. For best results the data contac t on the printed circuit board should be plated with a layer of minimum 0.76µm hard gold over minimum 3.81µm nickel. iButton is a registered trademark of Dallas Semiconductor.