DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ DS2Y ASCTB16E 201209-T

ORDERING INFORMATION

Standard packing: Tube: 50 pcs.; Case: 500 pcs. Miniature Relay DS2Y RELAYS Contact arrangement Nominal coil voltage Single side stable type Part No.

2 Form C

FEATURES

  1. 2 Form C contact 2. High sensitivity-200 mW nominal operating power 3. High breakdown voltage

1500 V FCC surge between open

  1. DIP-2C type matching 16 pin IC socket 5. Sealed construction TYPICAL APPLICATIONS 1. Telecommunication equipment 2. Office equipment 3. Computer peripherals 4. Security alarm systems 5. Medical equipment DS2Y-S Nominal coil voltage DC 3, 5, 6, 9, 12, 24, 48 V Operating function Nil: Single side stable Note: UL/CSA approved type is standard.

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ DS2Y ASCTB16E 201209-T RATING 1. Coil data Single side stable type 2. Specifications Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level]) *2 Half-wave pulse of sine wave: 11ms; detection time: 10µs *3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). Nominal coil voltage Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) Nominal operating current Coil resistance Nominal operating power Max. applied voltage (at 50°C 122°F) 3V DC 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) 66.7mA 45 Ω 200mW 200%V of nominal voltage 5V DC 40mA 125 Ω 6V DC 33.3mA 180 Ω 9V DC 22.2mA 405 Ω 12V DC 16.7mA 720 Ω 24V DC 8.3mA 2,880 Ω 48V DC 6.3mA 7,680 Ω 300mW Characteristics Item Specifications Contact Arrangement 2 Form C Initial contact resistance, max. Max. 50 m Ω (By voltage drop 6 V DC 1A) Contact material Ag+Au clad Rating Max. switching power 60 W, 62.5 VA (resistive load) Max. switching voltage 220 V DC, 250 V AC Max. switching current 2 A Max. carrying current 3 A Minimum operating power Approx. 98 mW (147 mW: 48 V) Nominal operating power Approx. 200 mW (300 mW: 48 V) Electrical characteristics Insulation resistance (Initial) Min. 100MΩ (at 500V DC) Measurement at same location as “Initial breakdown voltage” section. Breakdown voltage (Initial) Between open contacts 750 Vrms for 1min. (Detection current: 10mA.) Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA.) Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA.) FCC surge breakdown voltage between contacts and coil 1,500 V Temperature rise (at 20°C 68°F) Max. 65 °C with nominal coil voltage across coil and at nominal switching capacity Operate time [Set time] (at 20°C 68°F) Approx. 4 ms [approx. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Release time [Reset time] (at 20°C 68°F) Approx. 3 ms [approx. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Mechanical characteristics Shock resistance Functional Min. 490 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.) Destructive Min. 980 m/s 2 (Half-wave pulse of sine wave: 6 ms.) Vibration resistance Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10 µs.) Destructive 10 to 55 Hz at double amplitude of 5 mm Expected life Mechanical Min. 10 8 Electrical 5 ×105 (1 A 30 V DC), 105 (2 A 30 V DC) Conditions Conditions for operation, transport and storage* Ambient temperature: –40°C to +70°C –40°F to +158°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Max. operating speed (at rated load) 60 cpm Unit weight Approx. 4g .14oz

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ DS2Y ASCTB16E 201209-T REFERENCE DATA DIMENSIONS (mm inch) For general cautions for use, please refer to the “Cautions for use of Signal Relays” or “General Application Guidelines”. 1. Maximum switching capacity 2. Coil temperature rise (Single side stable) Tested sample: DS2Y -S-DC12V, 5 pcs. Measured portion: Inside the coil Ambient temperature: 21°C to 25°C 70°F to 77°F 3. Operate/release time for single side stable (Without diode) Tested sample: DS2Y -S-DC12V, 10 pcs. Ambient temperature: 20°C 68°F Switching current Contact voltage 1,000 V 100 V 10 V 10 mA 10 µA 100 mA 1 A Coil applied voltage, %V Temperature rise, °C30 100 110 3 A 2 A 0 A Coil applied voltage, %V Mean value Mean value Time, ms 80 0 100 120 Operate time Release time 4-(1) Influence of adjacent mounting Tested sample: DS2Y -S-DC12V, 10 pcs. Ambient temperature: 20°C 68°F TEST METHOD 1. Apply nominal voltage to No. (1) and (3) DS2Y relays. 2. Measure pick-up voltage and drop-out voltage of No. (2) relay when inter-relay distance ( ) changes. 4-(2) Influence of adjacent mounting Tested sample: DS2Y -S-DC12V, 10 pcs. Ambient temperature: 20°C 68°F TEST METHOD 1. Apply nominal voltage to No. (1) and (3) DS2Y relays. 2. Measure pick-up voltage and drop-out voltage of No. (2) relay when inter-relay distance ( ) changes. Inter-relay distance, mm inch Pick-up/Drop-out voltage, V 0 51 0 1 5 Pick-up voltage Drop-out voltage (1) OFF (2) (3) OFF ON ON OFF OFF ON ON .197 .394 .591 Inter-relay distance, mm inch Pick-up/Drop-out voltage, V 0 51 0 1 5 Pick-up voltage Drop-out voltage (1) OFF (2) (3) OFF ON ON OFF OFF ON ON .197 .394 .591 The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ Single side stable External dimensions General tolerance: ±0.3 ±.012 5.08 5.08 9.3 7.62 0.6 2.0 0.6 0.6 3.4 0.3 5.6 7.62 9.9 .200 .200 .300 .366 .787 .390 .024 .078 .024 .024 .134 .012 .220 .300 PC board pattern (Copper-side view) Tolerance: ±0.1 ±.004 2.54 2.54 8-0.9 dia. 7.62 matching 16 pin IC socket .100 .100 8-.035 dia. .300 Schematic (Bottom view) (Deenergized position) *A polarity bar shows the relay direction. N.O. Direction indication* N.O. COM N.C. COM N.C. CAD Data