DS2202 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

© TT electronics plc Issue A 06/2017 Page 1 TT Electronics | Roxspur Measurement & Control

2 Downgate Drive, Sheffield, South Yorkshire, S4 8BT, UK |Ph: +44 (0) 114 -244-2521

www.ttelectronics.com | RoxspurSales@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: A combined temperature and water-interface sensor for use in tanks storing a wide range of liquids. The temperature part can consist of up to 13 true averaging elements or up to 14 Pt100 spot elements, providing a continuous temperature profile of the product and vapour. The level part, made up of stainless steel, PTFE, FEP and Viton, is a capacitive probe, providing a continuous indication of the level of water below the stored product. Probe lengths from 150mm to 1.5m can be chosen. There is no need for on site calibration or set up, whilst the mechanical construction of the probe provides virtually maintenance -free operation over a wide range of products and temperature. This combined temperature and level capability means that only a single entry on the roof of the tank is needed. Alternatively, the level probe alone can be installed at an angle, on the side of the tank near its bottom. These features make LATIS ideal for upgrading existing tanks without operational disruption. The level accuracy qualifies LATIS for use in custody transfer applications as part of an ATG system according to the international OIML R85 standard. LATIS can be easily integrated with other industry standard level gauges of the radar and servo types. The level output is a 4 -20mA signal. For a detailed description of the temperature capabilities, consult data sheet DS2103. Features:  Integrated temperature and continuous water level (Base Sediment Water) monitoring  Single entry for two sensors: only one 29mm entry required  Certified for Hazardous Area Zone 0 operation  Maintenance and calibration free, no need for onsite setting up  Level detection accuracy down to ±2mm possible  Compatible with industry standard level gauges  Suitable for operation in corrosive environments

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Issue A 06/2017 Page 2 TT Electronics | Roxspur Measurement & Control www.ttelectronics.com | RoxspurSales@ttelectronics.com