DS1411 DALLAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
FEATURES
/square4Small size, true-ground interface to an RS232 COM Port for reading and writing iButton devices /square4Works with bipolar logic signals of ± 5V to ± 12V (RS232C) as well as unipolar signals of 5V to 12V /square4Supports reading and writing at regular and Overdrive speeds /square4Provides strong pullup to 5V for Temperature iButton, Crypto i Button and EEPROM iButton /square4Communicates at data rates of 9.6k (default), 19.2k, 57.6k and 115.2k bits/s /square4Powered entirely from an RS232 interface /square4Standard DB female connector for mating to the COM Port of a computer with DS9098 iButton Retainer for a single i Button or MicroLAN Cable (DS1402x)
ORDERING INFORMATION
DESCRIPTION
The DS1411 is a sophisticated RS232 to 1-Wire TM adapter and iButton holder which performs RS232 level conversion and actively generates the 1-Wire communication signals. Together with an adequate TMEX software driver it enables an IBM-compatible PC or laptop computer to directly read all and write any non-EPROM iButton devices. The DS1411 has a DS9098 retainer for a single F5 MicroCan and can replace the DS9097U-009 in applications that use only a single iButton. Mu ltiple i Buttons can be connected using standard MicroLAN Cables and button holders (see DS1401 and DS1402x data sheets). 1-Wire communication is supported by the adapter for regular as well as Overdrive speed. The serial port must support a data transmission rate of 9600 bits/s. Under software control, the adapter can be set up for RS232 data rates of 19200, 57600 and 115200 bits per second. The two higher rates are recommended for communication at Overdrive speed with Overdrive capable devices. Since the DS1411 operates in a byte mode, every data byte received from the RS232 port generates eight time slots on the 1-Wire bus. The DS1411 is based on the DS2480 Serial 1-Wire Line Driver chip and therefore is not a plug-in replacement for the DS1412 Serial Port Adapter. The RXD/ TXD Polarity Select input of the DS2480 is tied to VDD (non-inverting). DS1411 Serial Port iButton ™ Holde r www.dalsemi.com