DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 DG82 micro plug-in/pcb automotive relay Contacts Contact number & arrangement SPST-NO (1 Form A); SPDT (1 Form C) Contact material AgNi0.15; AgNi90/10; AgSnOInO; AgCdO Max. switching voltage DC 16VDC (current dependent - see Fig 3) Rated load (max. continuous current) DC1 40A/12VDC (Normally open); 30A/12VDC (Normally closed) Max. switching current3 Make 90A (120A:AgSnOInO) (Normally open); 45A (Normally closed) Break 40A (Normally open contact) / 30A (Normally closed contact) Minimum load AgNi0.15: 0.1A/12VDC, AgSnOInO: 05A/12VDC Initial resistance 50mΩ, max. at 0.1A/6VDC Coil Rated voltage DC 6...24V Must release voltage ≥0.1Un Operating range of supply voltage See coil table 1 Rated power consumption DC Approx. 1.2W (SPST-NO) / 1.5W (SPDT); 1.81W with resistor Insulation Insulation resistance 100MΩ at 500VDC, 50%RH Dielectric strength coil to contact 500Vrms, 1min contact to contact 500Vrms, 1min General Data Operating time (typical) ms 9 Release time (typical) ms 7 Electrical Life2 ops 2 x 105 Mechanical life ops 1 x 107 Dimensions L x W x H 23.5 x 15.7 x 26.0 mm (excluding terminals) Weight Plug-in: 21g / PCB: 19g approx. Ambient temperature storage -40 to 155°C operating -40 to 125°C (Derate above 85°C - consult factory) Shock resistance Functional: 20g 11ms; Destructive: 100g Vibration resistance DA 1.27mm 10-40Hz / 40-70Hz:5g / DA 0.5mm 100-500Hz: 10g

  • Industry Standard micro-ISO plug-in relay
  • Up to 120A 12VDC inrush capability
  • PCB Mounting option
  • Cost effective
  • RoHS Compliant Ref: DG82 102315JHM Specifications are liable to change without notice. E&OE.

See coil table 120 - AgNi 90/10 70 - AgSnOInO 80 - AgNi 0.15 Contact arrangement 11 - SPDT (1 C/O, 1 Form C) 21 - SPST-NO (1N/O, 1 Form A) Cover protection category 3 - in cover, sealed - IP67 7 - in cover, dust cover - IP54 Connection mode 5 - for PCB 6 - Flat Blades Coil Options Nil - UL Class F coil insulation H - UL Class H insulation for higher ambient temperatures - consult factory. Parallel Component Options Nil - No option R - Resistor (see Table 1 for values) D - Diode (+85 / -86) DR - Diode reversed (-85 / + 86) - standard BD - Bidirectional diode DG82 micro plug-in/pcb automotive relay Ref: DG82 102315JHM Coil Data Table 1 Coil Voltage Code Nominal Voltage (VDC) Coil Resistance (Ω) ±10% Must Operate Voltage Max. (VDC) Allowable Voltage (VDC)* Must release voltage min. (VDC) Parallel Resistor (optional) (Ω)

1 Form A 1 Form C 1 Form A 1 Form C

1006 6 32 25 3.6 10.4 9.2 0.6 170 1012 12 123 97 7.2 20.4 18.1 1.2 680 1024 24 483 384 14.4 40.4 36.0 2.4 2720 * At ambient temperature of 85’C, maximum allowable voltage should be reduced by 28% Page 2 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 Specifications are liable to change without notice. E&OE.

micro plug-in/pcb automotive relay American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516 Page 3 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 Overall Dimensions Fig. 1 PCB Mounting Dimensions Fig. 2 Wiring Diagrams (Bottom View) Mounting Holes (Bottom View) Dimensions in mm Reference Curves Fig. 3 Ref: DG82 102315JHM Notes: 1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC. 2: Electrical life obtained at resistive or inductive load at 40A, 15VDC with suitable arc suppression circuit attached and with operating frequency of 1 op/sec. 3: Maximum make current refers to lamp load inrush current. Switching Voltage (VDC) Switching Current (A) SPST-NO (1 Form A) SPDT (1 Form C) Specifications are liable to change without notice. E&OE.