DF005 SSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
SHANGHAI SUNRISE ELECTRONICS CO., LTD. VOLTAGE: 50 TO 1000V CURRENT: 1.0A
FEATURES
- Ideal for printed circuit board
- Reliable low cost construction utilizing molded plastic technique
- Surge overload rating: 50 A peak
- High temperature soldering guaranteed: 250 oC/10sec/ at terminals MECHANICAL DATA
- Terminal: Plated leads solderable per MIL-STD 202E, method 208C
- Case: UL-94 Class V-O recognized flame retardant epoxy
- Polarity: Polarity symbol marked on body
- Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS SYMBOL DF 005 DF DF DF DF DF DF
10 UNITS
Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current (Ta=40oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at forward current 1.0A) Maximum DC Reverse Current T a=25oC µA (at rated DC blocking voltage) Ta=125oC µA Typical Junction capacitance (Note 1) CJ pF Typical Thermal Resistance (Note 2) Rθ(Ja) oC/W Storage and Operating Junction Temperature TSTG,TJ oC Note: 1. Measured at 1.0 MHz and applied voltage of 4.0 Vdc 2. Thermal Resistance from junction to Ambient mounted on P.C. Board with 13×13mm copper pads. http://www.sse-diode.com DF005 THRU DF10 IF(AV) 1.0 A RATINGS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) PASSIVATED BRIDGE RECTIFIER SINGLE PHASE GLASS A -55 to +150 IR 10.0 500 IFSM 50 V 1.1VF TECHNICAL SPECIFICATION DF Dimensions in inches and (millimeters)