DEVR13-5061-S8-1012-R1 DURAKOOL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
HVDC Contactor 135A / 1000VDC Specifications are subject to change without notice. E&OE.See website for contact details: www.durakool.com DEVR13 25-Feb-25KS
- HVDC 135A at 1000VDC
- Max. switching current = 1000A
- Contacts sealed in inert gas
- Magnet arc blowout
- Auxiliary contact option
- Female M5 power terminals Contacts Ordering Code Contact arrangement SPST-NO-DM Contact material T2+Ag Max. switching voltage AC/DC 1000VDC Rated load DC1 135A 1000VDC (break only above 135A) Series Coil code: Max. continuous thermal current 600s 220A See table 1 30s 490A Contact material Max switching current 1 time only 1000A 450VDC 50: T2+Ag Initial contact resistance max. 30mΩ (at 1A) typ. 1mΩ (at 1A) Auxiliary contact (when fitted) arrangement SPST-NO (1 Form A) Contact arrangement max. current 2A @ 30VDC / 3A @ 125VAC 61: SPST-NO* min. current 100mA @ 8VDC 71: SPST-NO* + Auxiliary Coil * Polarised - see page 2 Nominal voltage (see page 2) DC 12~48VDC Rated power consumption 5.5W @ 12VDC Insulation Mounting & terminations Insulation resistance initial 100MΩ (min.) Bottom flange mounting base life end 50MΩ (min.) S8: M5 Female power terminals Dielectric strength coil to contact 3500Vrms / 10mA / 1 min (at sea level) Coil & auxiliary contacts by flying leads contact to contact 3500Vrms / 10mA / 1 min (at sea level) General Data Operate time at 23°C max. 25ms Coil wire length Bounce time at 23°C max 7ms R: 15.75 (400 ±10mm) (standard) Release time at 23°C max. 12ms T: 5.9” (150 ±10mm) Electrical life ops. Voltage and current dependent - see fig. 1 Mechanical life ops. 2 x 105 Environmental Coil wire & auxiliary contact termination Environmental Seal IP67 1: None (standard) Ambient temperature operating -40 to +85°C 2: Yazaki 7282-5558-10 male, fitted to coil wires only. Relative humidity 5 to 95%RH 3. Molex mini-fit female, fitted to coil wires only. Shock resistance 20G peak, 11ms 1/2 sine Other terminations to special order Vibration resistance 20G sine peak (80 to 2000Hz) Dimensions L x W x H 40 x 54 (over flanges) x 59 mm (max.) Version Weight approx. 190g ± 5g /1: Version 1 ü RoHS Compliant DEVR13-5061-S8-1012-R1/1 *Image is for illustrative purposes only. Please refer to datasheet for detail. E305753
HVDC Contactor 135A / 1000VDC Specifications are subject to change without notice. E&OE.See website for contact details: www.durakool.com DEVR13 25-Feb-25KS Electrical Performance Fig. 1 Coil Data Table 1 Coil code Nominal voltage (VDC) Must operate voltage max. (VDC at 23°C) Max. allowable voltage (VDC) Must release voltage min. (VDC) Coil resistance Ω ±10% (at 23°C) Coil current (mA) Coil power (W at 23°C) *Coil not UL approved. Dimensions (mm) Fig. 2 Circuit Diagram Fig. 3 Recommended Terminal Screws (not supplied): M5 x 0.8 x 10mm M5 spring washer M5 flat washer Recommended Conductor 40mm2 Torque settings Terminals: 3.5 - 4.4Nm Base Mounting: 1.8 - 2.5Nm Power Terminals shown. Colour: White Colour: Blue Auxiliary contact wires A WG22 Coil wires, A WG 22 100 1000 10000 100000 1 10 100 1000 Estimated Life (cycles) Current (A) 1000VDC 750VDC 450VDC 100 1000 10000 10 100 1000 Time (s) Carry Current (A) 1. Estimates are based on test and extrapolated data. The user is advised to confirm performance in their application. 2. Recommended conductor size and terminal temperature rise maximum in accordance with ISO (EN) 60947.1 70°C. 3. Estimated electrical life is based on make and break current. 4. All data is based on resistive loads. Notes: 1: Note coil is not polarised. 2: Observe contact polarity as indicated contactor life will be severely reduced if incorrectly connected. 3: Nominal dimensions in mm. 4: Tolerances (nominal), <10mm: ± 0.3mm, 10 ~ 50mm: ± 0.6mm, >50mm: ± 1.0mm. 5: Coil wire length and terminations can be customised upon request. Green line represents 40mm² conductors.