DEVR01-5081-S8-1024-R1 DURAKOOL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
HVDC Contactor 10A / 1000VDC Specifications are subject to change without notice. E&OE.See website for contact details: www.durakool.com DEVR01 16-APR-2026FW
- HVDC 10A at 1000VDC
- Max. switching current = 300A
- Contacts sealed in inert gas
- Magnet arc blowout
- Pre-charge relay
- Female M4 power terminals
- Non-polarised (bi-directional) design ü RoHS Compliant Contacts Ordering Code Contact arrangement SPST-NO-DM Contact material T2+Ag D E V R 0 1 - 5 - S 8 - 1 0 2 4 - R 1 Max. switching voltage AC/DC 1000VDC Rated load (resistive, cos φ=1) DC1 10A 1000VDC Series Coil code: Max. continuous thermal current 600s 18A See table 1 30s 45A Contact material Max switching current 1 time only 300A 450VDC 50: T2+Ag Initial contact resistance max. 30mΩ (at 1A) typ. 1mΩ (at 1A) Coil Contact arrangement Rated voltage (see page 2) DC 12~48VDC 81: SPST-NO (no polarity) Rated power consumption hold 3.2W @ 12VDC Insulation Insulation resistance initial 100MΩ (min.) Mounting & terminations life end 50MΩ (max.) Bottom flange mounting base Dielectric strength coil to contact 3500Vrms / 10mA / 1 min (at sea level) S8: M4 Female power terminals contact to contact 3500Vrms / 10mA / 1 min (at sea level) Coil by flying leads General Data Operate time at 23°C max. 30ms Coil wire length Bounce time at 23°C max. 7ms R: 400mm (standard) Release time at 23°C max. 12ms T: 5.9” (150mm) Electrical life Voltage and current dependent - see fig. 1 Mechanical life 2 x 105 Coil wire & auxiliary contact termination Environmental 1: None Environmental Seal IP67 2: Yazaki 7282-5558-10 Male, fitted to coil wires only. Ambient temperature operating -40 to +85°C Other terminations to special order Relative humidity 5 to 95%RH Shock resistance 20G peak, 11ms 1/2 sine Vibration resistance 20G sine peak (80 to 2000Hz) Version: Dimensions L x W x H 37.2 x 51.26 (over flanges) x 47.82 (approx.) /1: Version 1 Weight approx. 120g ±5g *Image is for illustrative purposes only. Please refer to datasheet for detail. DEVR01-5081-S8-1024-R1/1 E305753
HVDC Contactor 10A / 1000VDC Specifications are subject to change without notice. E&OE.See website for contact details: www.durakool.com DEVR01 16-APR-2026FW Dimensions (mm) Fig. 2 Electrical Performance Fig. 1 Circuit Diagram Fig. 3 Recommended Terminal Screws (not supplied): M4 x 0.7 x 8mm M4 spring washer M4 flat washer. Recommended Conductor 2mm2 Torque settings Terminals: 1.8 - 2.5Nm Base Mounting: 1.8 - 2.5Nm Coil Data Table 1 Coil code Nominal voltage (VDC) Must operate voltage max. (VDC at 23°C) Max. allowable voltage (VDC) Must release voltage min. (VDC) Coil resistance Ω ±10% (at 23°C) Coil Current (mA) Coil power (W at 23°C) Coil is not polarised Power Terminals Non Polarised Notes: 1: Note coil is not polarised. 2: Nominal dimensions in mm. 3: Tolerances (nominal), <10mm: ± 0.3mm, 10 ~ 50mm: ± 0.6mm, >50mm: ± 1.0mm. 4: Coil wire length and terminations can be customised upon request. Coil Lead White AWG22 1. Estimates are based on test and extrapolated data (extrapoloated data can be seen with dotted line). The user is advised to confirm performance in their application. 2. Recommended conductor size and terminal temperature rise maximum in accordance with ISO (EN) 60947.1 70°C. 3. Estimated electrical life is based on make and break current. 4. All data is based on resistive data. Green line represents 2mm² conductors.