DDH-CRS-PQ2-1 DOMINANT | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 1 of 11 DomiLED – AlInGaP : DDx-xRS
- High brightness surface mount LED.
- 120° viewing angle.
- Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm.
- Qualified according to JEDEC moisture sensitivity Level 2.
- Compatible to both IR reflow soldering and TTW soldering.
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 2 of 11 Part Ordering Number Chip Technology / Color Viewing Angle ° Luminous Intensity @ IF=20mA Iv (mcd) DDH-CRS-PQ2-1 AlInGaP 120 45.0 – 112.5
- DDH-CRS-P1 Hyper-red, 640nm 45.0 – 56.0
- DDH-CRS-P2 56.0 – 71.5
- DDH-CRS-Q1 71.5 – 90.0
- DDH-CRS-Q2 90.0 – 112.5 DDH-SRS-QR2-1 71.5 – 180.0
- DDH-SRS-Q1 71.5 – 90.0
- DDH-SRS-Q2 90.0 – 112.5
- DDH-SRS-R1 112.5 – 140.0
- DDH-SRS-R2 140.0 – 180.0 DDS-CRS-PQ2-1 AlInGaP 120 45.0 – 112.5
- DDS-CRS-P1 Super-red, 632nm 45.0 – 56.0
- DDS-CRS-P2 56.0 – 71.5
- DDS-CRS-Q1 71.5 – 90.0
- DDS-CRS-Q2 90.0 – 112.5 ** Not for new design. DDS-CRS-QR2-1 71.5 – 180.0
- DDS-CRS-Q1 71.5 – 90.0
- DDS-CRS-Q2 90.0 – 112.5
- DDS-CRS-R1 112.5 – 140.0
- DDS-CRS-R2 140.0 – 180.0 DDS-SRS-QR2-1 71.5 – 180.0
- DDS-SRS-Q1 71.5 – 90.0
- DDS-SRS-Q2 90.0 – 112.5
- DDS-SRS-R1 112.5 – 140.0
- DDS-SRS-R2 140.0 – 180.0 DDR-CRS-QR2-1 AlInGaP 120 71.5 – 180.0
- DDR-CRS-Q1 Red, 625nm 71.5 – 90.0
- DDR-CRS-Q2 90.0 – 112.5
- DDR-CRS-R1 112.5 – 140.0
- DDR-CRS-R2 140.0 – 180.0 ** Not for new design. DDR-CRS-RS2-1 112.5 – 285.0
- DDR-CRS-R1 112.5 – 140.0
- DDR-CRS-R2 140.0 – 180.0
- DDR-CRS-S1 180.0 – 224.0
- DDR-CRS-S2 224.0 – 285.0 DDR-SRS-RS2-1 112.5 – 285.0
- DDR-SRS-R1 112.5 – 140.0
- DDR-SRS-R2 140.0 – 180.0
- DDR-SRS-S1 180.0 – 224.0
- DDR-SRS-S2 224.0 – 285.0
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 3 of 11 Part Ordering Number Chip Technology / Color Viewing Angle Luminous Intensity @ IF=20mA Iv (mcd) DDR-TRS-TU2-1 Ts AlInGaP 120 285.0 – 715.0
- DDR-TRS-T1 Red, 625nm 285.0 – 355.0
- DDR-TRS-T2 355.0 – 450.0
- DDR-TRS-U1 450.0 – 560.0
- DDR-TRS-U2 560.0 – 715.0 DDA-CRS-RS2-1 As AlInGaP 120 112.5 – 285.0
- DDA-CRS-R1 Amber, 615nm 112.5 – 140.0
- DDA-CRS-R2 140.0 – 180.0
- DDA-CRS-S1 180.0 – 224.0
- DDA-CRS-S2 224.0 – 285.0 DDA-SRS-ST2-1 180.0 – 450.0
- DDA-SJS-S1 180.0 – 224.0
- DDA-SJS-S2 224.0 – 285.0
- DDA-SJS-T1 285.0 – 355.0
- DDA-SJS-T2 355.0 – 450.0 DDO-CRS-RS2-1 As AlInGaP 120 112.5 – 285.0
- DDO-CRS-R1 Orange, 605nm 112.5 – 140.0
- DDO-CRS-R2 140.0 – 180.0
- DDO-CRS-S1 180.0 – 224.0
- DDO-CRS-S2 224.0 – 285.0 DDO-SRS-ST2-1 180.0 – 450.0
- DDO-SRS-S1 180.0 – 224.0
- DDO-SRS-S2 224.0 – 285.0
- DDO-SRS-T1 285.0 – 355.0
- DDO-SRS-T2 355.0 – 450.0 DDY-CRS-QR2-1 As AlInGaP 120 71.5 – 180.0
- DDY-CRS-Q1 Yellow, 587nm 71.5 – 90.0
- DDY-CRS-Q2 90.0 – 112.5
- DDY-CRS-R1 112.5 – 140.0
- DDY-CRS-R2 140.0 – 180.0 ** Not for new design DDY-CRS-RS2-1 112.5 – 285.0
- DDY-CRS-R1 112.5 – 140.0
- DDY-CRS-R2 140.0 – 180.0
- DDY-CRS-S1 180.0 – 224.0
- DDY-CRS-S2 224.0 – 285.0 DDY-SRS-ST2-1 180.0 – 450.0
- DDY-SRS-S1 180.0 – 224.0
- DDY-SRS-S2 224.0 – 285.0
- DDY-SRS-T1 285.0 – 355.0
- DDY-SRS-T2 355.0 – 450.0
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 4 of 11 Part Ordering Number Chip Technology / Color Viewing Angle Luminous Intensity @ IF=20mA Iv (mcd) DDY-TRS-TU2-1 Ts AlInGaP 120 285.0 – 715.0
- DDY-TRS-T1 Yellow, 590nm 285.0 – 355.0
- DDY-TRS-T2 355.0 – 450.0
- DDY-TRS-U1 450.0 – 560.0
- DDY-TRS-U2 560.0 – 715.0 DDG-CRS-PQ2-1 As AlInGaP 120 45.0 – 112.5
- DDG-CRS-P1 Green, 572nm 45.0 – 56.0
- DDG-CRS-P2 56.0 – 71.5
- DDG-CRS-Q1 71.5 – 90.0
- DDG-CRS-Q2 90.0 – 112.5 DDG-SRS-QR2-1 71.5 – 180.0
- DDG-SRS-Q1 71.5 – 90.0
- DDG-SRS-Q2 90.0 – 112.5
- DDG-SRS-R1 112.5 – 140.0
- DDG-SRS-R2 140.0 – 180.0 NOTE: 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ±11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table.
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 5 of 11 Wavelength Grouping. Color Group Wavelength distribution (nm) DDH; Hyper-red Full 636 - 646 DDS; Super-red Full 625 – 640 DDR-CJ, -SJ; Red (AS) DDR-TJ; Red (TS) Full Full 620 – 630 620 - 635 DDA; Amber Full W X 610 – 621 610 – 615 615 – 621 DDO; Orange Full W X Y Z 600 – 612 600 – 603 603 – 606 606 - 609 609 - 612 DDY; Yellow Full W X Y Z 582 – 594 582 – 585 585 – 588 588 - 591 591 - 594 DDG; Green Full W X Y Z 564.5 – 576.5 564.5 – 567.5 567.5 – 570.5 570.5 – 573.5 573.5 – 576.5 Dominant wavelength is measured with an accuracy of ±1 nm. Electrical Characteristics at Ta=25°C. Vf @ If = 20mA Vr @ Ir = 100uA Part Number Typ. (V) Max. (V) Min.(V) DDA, DDS, DDR-CJS, DDR-SJS, DDG DDH, DDO, DDY-CJS, DDY-SJS 2.1 2.3 12 DDR-TJS, DDY-TJS 2.2 2.6 12 Forward voltage, Vf is measured with an accuracy of ±0.1 V.
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 6 of 11 Vf Binning. Vf Bin @ 20mA Forward Voltage (V) 01 1.55 … 1.85 02 1.85 … 2.15 03 2.15 … 2.45 04 2.45 … 2.75 Forward voltage, Vf is measured with an accuracy of ±0.1 V Absolute Maximum Ratings. Maximum Value Unit DC forward current. 30 mA Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005) 1000 mA Reverse voltage. 5 V LED junction temperature. 125 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C Power dissipation ( at room temperature ) 75 mW
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 7 of 11 Recommended Solder Pad
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 8 of 11 Relative intensity vs. forward current. Forward current vs. forward voltage. Intensity vs. DC Forward Current 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 0 102 0 304 0 506 0 FORWARD CURRENT (mA) Relative intensity. Normalized at 20 mA. Forward Current (mA) vs. Forward Voltage Forward Voltage (V) Forward Current (mA) AS AlInGaP TS AlInGaP Radiation pattern. Maximum forward current vs. temperature. 0.270° 90° 80° 60° 50° 40° 30° 20° 0.6 0.4 1.0 0.8 10° 0° 0 10 203 04 05 06 0 708 09 0 10 Ambient Temperature Forward Current, If Relative Intensity vs. Wavelength Relative Spectra Emission 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 500 550 600 650 700 750 800 Wa v e l e ngth (n m) Green Or ange Amber Super Red Hyper Red Red
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 9 of 11 Taping And Orientation. Reels come in quantity of 8000 units or 2000 units. Reel diameters are 330 mm and 180 mm respectively.
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 10 of 11 Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 100 125 150 175 200 225 250 275 0 50 100 150 200 Time (sec) Temperature (oC) Preheat 60-120s 183 oC 60-150s Ramp-up 3 oC/sec Ramp-down 6 oC/sec max. 235-240oC 10-30s 360s max Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 100 125 150 175 200 225 250 275 300 0 50 100 150 200 Time (sec) Temperature (oC) Preheat 60-180s 217 oC 60-150s Ramp-up 3 oC/sec max. Ramp-down 6 oC/sec max. 260-255oC 10-30s 480s max
18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 11 of 11 NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability ar ising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not aut horized for use as critical components in life support devices or system s without the express writt en approval from the managing director of DOMINANT Semiconductors.