DDH-GRS DOMINANT | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 1 of 1 Anode marking

  • Surface mount LED.
  • 120° viewing angle.
  • Small package outline (LxWxH) of 3.2 x 2.8 x 1.8 mm.
  • Qualified according to JEDEC moisture sensitivity Level 2.
  • Compatible to both IR reflow soldering and TTW soldering. DomiLED – AlGaAs: DDH-GRS

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 2 of 2 Part Ordering Number Chip Technology / Color (dom. WL) Luminous Intensity @ If = 20mA Iv ( mcd ) DDH-GRS-MN2-1

  • DDH-GRS-M1
  • DDH-GRS-M2
  • DDH-GRS-N1
  • DDH-GRS-N2 DDH-GRS-NP2-1
  • DDH-GRS-N1
  • DDH-GRS-N2
  • DDH-GRS-P1
  • DDH-GRS-P2 AlGaAs/ Hyper Red, 645 nm 18.0 … 45.0 18.0 … 22.4 22.4 … 28.5 28.5 … 35.5 35.5 … 45.0 28.5 … 71.5 28.5 … 35.5 35.5 … 45.0 45.0 … 56.0 56.0 … 71.5 NOTE: 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ±11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. Characteristics. Forward voltage @ If=20 mA. Chip Type Viewing angle at 50% Iv Reverse current, IR @ VR = 5V, (max) 1.9 V (typ.); 2.6 V (max) AlGaAs 120° 100 μA Wavelength Grouping. Color Group Wavelength distribution (nm) DDH; Hyper Red Full 640 – 650 Dominant wavelength is measured with an accuracy of ±1 nm.

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 3 of 3 Vf Binning. Vf Bin @ 20mA Forward voltage (V) 01 1.55 … 1.85 02 1.85 … 2.15 03 2.15 … 2.45 04 2.45 … 2.60 Forward voltage, Vf is measured with an accuracy of ±0.1 V. Absolute Maximum Ratings. Maximum Value Unit DC forward current. 30 mA Peak pulse current; (tp ≤ 10 μs, Duty cycle = 0.005) 500 mA Reverse voltage. 5 V LED junction temperature. 100 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C Power dissipation ( at room temperature ) 75 mW

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 4 of 4 Recommended Solder Pad

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 5 of 5 Relative luminous intensity vs. forward current. Forward current vs. forward voltage. Radiation pattern. Maximum forward current vs. temperature. 0.270° 90° 80° 60° 50° 40° 30° 20° 0.6 0.4 1.0 0.8 10° 0° 10 20 30 40 50 60 70 80 85 Ambient Temperature Forward Current, If Intensity vs. DC Forward Current 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 0 1 02 03 04 05 06 0 FORWARD CURRENT (mA) Relative intensity. Normalized at 20 mA. Forward Current vs. Forward Voltage Forward Voltage (V) Forward Current (mA) AlGaAs

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 6 of 6 Taping And Orientation. Reels come in quantity of 2000 units. Reel diameter is 180 mm. 4±0,1 Ø1,5+0,1-0 Ø1,5+0,25 3,05±0,1 12+0,3 -0,1 5,5±0,05 4±0,1 2±0,05 1,75±0,1 2,06±0,1 0,229±0,02 C A 5,55±0,1

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 7 of 7 Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 100 125 150 175 200 225 250 275 0 50 100 150 200 Time (sec) Temperature (oC) Preheat 60-120s 183 oC 60-150s Ramp-up 3 oC/sec max. Ramp-down 6 oC/sec max. 235-240oC 10-30s 360s max Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 100 125 150 175 200 225 250 275 300 0 50 100 150 200 Time (sec) Temperature (oC) Preheat 60-180s 217 oC 60-150s Ramp-up 3 oC/sec max. Ramp-down 6 oC/sec max. 260-255oC 10-30s 480s max

20/10/04 DomiLED AlGaAs DDH-GRS - Catalogue-v2.doc Page 8 of 8 NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors.