DCM010 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Art. No. Max. switching capacity Operating temperature 01010.0-00 DC 15 A -40 to +40 °C (-40 to +104 °F) 01010.0-10 DC 13 A -40 to +50 °C (-40 to +122 °F) 01010.0-20 DC 11 A -40 to +60 °C (-40 to +140 °F) TECHNICAL DATA Contact type normally open (MOSFET) Service life > 100,000 cycles Operating voltage DC 20 to 56 V Control contact – signal current 3 mA at DC 20 V / 4.5 mA at DC 24 V 14 mA at DC 48 V / 17 mA at DC 56 V Connection 6-pole terminal: stranded wire1 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12) Mounting clip for 35 mm DIN rail, EN 60715 Casing plastic according to UL94 V-0, grey/black Dimensions 93 x 53 x 44 mm Weight ~ 65 g Fitting position vertical Operating temperature see article table below Storage temperature -40 to +80 °C (-40 to +176 °F) Operating / Storage humidity < 90 % RH (non-condensing) Protection type IP20 Approvals UL File No. E342261, VDE, EAC Note other versions on request 1 When connecting with stranded wires, wire end ferrules must be used. The switch module is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ensured that the external contact is suitable to switch the required signal current without any problems. > High DC switching capacity > Variety of applications > Wide DC voltage range > Simple connection Example of connection Heater Switch module DCM 010 Connection diagram SWITCH MODULE – DC LINE DCM 010 | DC 20 to 56 V REGULATING