DCHUB10H WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Wall Industries, Inc. Rev A DCHUB10H SERIES

10 Watt DC/DC Power Converters

06/19/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 1 of 4

FEATURES

  • Single and Dual Outputs
  • 10 Watts Output Power
  • Remote On/Off Control
  • 3000VDC I/O Isolation
  • High Efficiency up to 87%
  • Lead Free Design, RoHS Compliant
  • Free Air Convection
  • 6 Pin DIP Package with IndustryFStandard Footprint
  • 2:1 Wide Input Voltage Ranges
  • Shielded Metal Case with Insulated BaseFplate
  • F40°C to +85°C Operating Temperature Range
  • Industry Standard 2.0” x 1.0” x 0.4” DIP Package
  • Short Circuit, Over Voltage, & Over Load Protection
  • Custom Designs Available Size: 2.0 x 1.0 x 0.4 inches 50.8 x 25.4 x 10.2 mm

APPLICATIONS

  • Battery Operated Equipment
  • Telecom
  • Industry Control Systems
  • Wireless Networks
  • Measurement Equipment

DESCRIPTION

The DCHUB10H series of isolated DC/DC power converters provides 10 Watts of continuous output power in a 2.0” x 1.0” x 0.4” shielded metal case. This series consists of single and dual output models with 2:1 input voltage ranges of 9F18VDC, 18F36VDC, and 36~75VDC. Some features include high efficiency up to 87%, 3000VDC I/O isolation, remote on/off control, and F40 °C to +85°C operating temperature range. The DCHUB10H series is RoHS compliant and has short circuit, over load, and over voltage protection. These converters are best suited for use in battery operated equipment, measurement equipment, telecom, wireless networks, industry control systems, and anywhere where isolated, tightly regulated voltages and compact size are required. MODEL SELECTION TABLE SINGLE OUTPUT MODELS Output Current Input Current Model Number Input Voltage Output Voltage Min Load (1) Full Load No Load Full Load Output Power Efficiency Maximum Capacitive Load DCHUB10F12S33H 3.3 VDC 20mA 3000mA 10mA 1130mA 10W 77% 3300µF DCHUB10F12S05H 5 VDC 0mA 2000mA 21mA 1069mA 10W 82% 1330µF DCHUB10F12S12H 12 VDC 0mA 830mA 22mA 1013mA 10W 86% 680µF DCHUB10F12S15H 15 VDC 0mA 670mA 21mA 1034mA 10W 85% 470µF DCHUB10F12S24H

12 VDC

(9 – 18 VDC)

24 VDC 0mA 415mA 24mA 1000mA 10W 87% 133µF

DCHUB10F24S33H 3.3 VDC 20mA 3000mA 6mA 558mA 10W 78% 3300µF DCHUB10F24S05H 5 VDC 0mA 2000mA 10mA 528mA 10W 83% 1330µF DCHUB10F24S12H 12 VDC 0mA 830mA 12mA 506mA 10W 86% 680µF DCHUB10F24S15H 15 VDC 0mA 670mA 12mA 517mA 10W 85% 470µF DCHUB10F24S24H

24 VDC

(18 – 36 VDC)

24 VDC 0mA 415mA 13mA 500mA 10W 87% 147µF

DCHUB10F48S33H 3.3 VDC 20mA 3000mA 3mA 279mA 10W 78 % 3300µF DCHUB10F48S05H 5 VDC 0mA 2000mA 6mA 264mA 10W 83% 1 330µF DCHUB10F48S12H 12 VDC 0mA 830mA 7mA 253mA 10W 86% 4 70µF DCHUB10F48S15H 15 VDC 0mA 670mA 6mA 262mA 10W 84% 2 20µF DCHUB10F48S24H

48 VDC

(36 – 75 VDC)

24 VDC 0mA 415mA 8mA 257mA 10W 85% 100µF

Output Current Input Current Model Number Input Voltage Output Voltage Min Load Full Load No Load Full Load Output Power Efficiency Maximum Capacitive Load DCHUB10F12D05H ±5 VDC 0mA ±1000mA 20mA 1069mA 10W 8 2% ±1000µF DCHUB10F12D12H ±12 VDC 0mA ±415mA 28mA 1013mA 10W 8 6% ±220µF DCHUB10F12D15H (9 – 18 VDC) ±15 VDC 0mA ±330mA 30mA 1019mA 10W 85% ±147µF DCHUB10F24D05H ±5 VDC 0mA ±1000mA 10mA 528mA 10W 83% ±1000µF DCHUB10F24D12H ±12 VDC 0mA ±415mA 15mA 506mA 10W 86% ±220µF DCHUB10F24D15H (18 – 36 VDC) ±15 VDC 0mA ±330mA 17mA 510mA 10W 85% ±147µF DCHUB10F48D05H ±5 VDC 0mA ±1000mA 6mA 261mA 10W 84% ±680µF DCHUB10F48D12H ±12 VDC 0mA ±415mA 8mA 253mA 10W 86% ±122µF DCHUB10F48D15H (36 – 75 VDC) ±15 VDC 0mA ±330mA 9mA 258mA 10W 84% ±100µF NOTES 1. Some models require a minimum loading on the out put. Output current under this value will not damage these devices; however, they may not meet all listed specifications.

Wall Industries, Inc. Rev A DCHUB10H SERIES 06/19/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 2 of 4 TECHNICAL SPECIFICATIONS: DCHUB10H SERIES All specifications are based on 25°C, nominal input voltage, and maximum output current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS

12 VDC nominal input models 9 12 18

24VDC nominal input models 18 24 36 Input Voltage Range 48VDC nominal input models 36 48 75 VDC

12 VDC nominal input models 25

24VDC nominal input models 50 Input Surge Voltage (100ms max) 48VDC nominal input models 100 VDC Input Reflected Ripple Current Nominal Vin and full load 170 mApFp Input Current See Table Input Filter Pi Type Converter ON Open or 3.5V < Vr < 12V Remote On/Off Converter OFF Short to FVin (Pin 2) or 0V < Vr < 1.2V Sourcing Current of Remote Control Pin Nominal Vin 0.2 mA Idle Input Current (at Remote OFF State) Nominal Vin 3 mA OUTPUT SPECIFICATIONS Output Voltage See Table Voltage Accuracy Full load and nominal Vin F1 +1 % Output Current See Table Minimum Load See Table Maximum Capacitive Load See Table StartFup Time Nominal Vin and constant resistive load 770 ms Line Regulation LL to HL at full load F0.5 +0.5 % Single output models 25% load to full load F0.5 +0.5 Balanced load F0.5 +0.5 Load Regulation Dual output models Unbalanced load 25% to full load F5 +5 Output Power 10 W Ripple & Noise 20MHz bandwidth 100 mVpFp Temperature Coefficient ±0.02 %/°C Transient Response Overshoot di/dt=0.8A/µs F5 +5 % of Vo Transient Response Settling Time 50% load step chan ge 2000 µs PROTECTION 3.3VDC output models 3.9 5VDC output models 6.2 12VDC output models 15 15VDC output models 18 Over Voltage Protection

24 VDC output models

Short Circuit Protection continuous, automatic recovery Over Load Protection % of full load at nominal inpu t 150 % GENERAL SPECIFICATIONS Efficiency Nominal input See Table Isolation Voltage (Input to Output) Input to Output 3000 VDC Isolation Resistance (Input to Output) 500VDC 1 GΩ Isolation Capacitance 500 pF Switching Frequency 300 KHz ENVIRONMENTAL SPECIFICATIONS Operating Temperature With derating (see derating curve) F40 +85 °C Maximum Case Surface Temperature +100 °C Storage Temperature F55 +105 °C Relative Humidity 5 95 % RH Cooling Free air convection MTBF 1,960,000 hours PHYSICAL SPECIFICATIONS Case Material NickelFcoated copper Base Material NonFconductive black plastic Potting Material Silicon rubber (UL94VF0) Weight 1.06oz (30g)

Wall Industries, Inc. Rev A DCHUB10H SERIES 06/19/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 3 of 4 DERATING DCHUB10F48S05 Derating Curve 120 100 -40 -20 0 20 40 60 80 100 120 Ambient Temperature (°C) Output Power (%) EFFICIENCY DCHUB10F48S05 Efficiency vs Input Voltage DCHUB10F4 8S05 Efficiency vs Output Current 18 24 30 36 42 48 54 60 66 75 Efficiency (%) Input Voltage (VDC) Efficiency (%) Output Current (A) CHARACTERISTICS Transient Response at 50%~100% Max Load Loop Gain & Phase at Vin=48VDC, Full Load

Wall Industries, Inc. Rev A DCHUB10H SERIES 06/19/2013 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603F778F2300 • Toll Free: 888F597F9255 • Fax 603F778F9797 website: www.wallindustries.com • eFmail: sales@wallindustries.com Page 4 of 4 MECHANICAL DRAWING Unit: inches (mm) 0.4 (10.16) 1.0 (25.4) 0.4 (10.16) 0.4 (10.2) 0.2 (5.08) Ø0.04 (Ø1.0) 2.0 (50.8) 0.3 (7.62) 0.2 (5.08) 0.3 (7.62) BOTTOM VIEW 0.1 (2.5) NOTES 1. Tolerance: ±0.02 (±0.5) 2. Case Material: nickel-coated copper 3. Base Material: non-conductive black plastic 4. Potting Material: silicon rubber (UL94V-0) 5. Weight: 1.06oz (30g) 6. All dimensions are for reference only PIN CONNECTIONS Pin Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout

4 No Pin Common

6 Remote On/Off

(Optional) Remote On/Off (Optional) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our inFhouse research and development engineers will provide a solution that exceeds your performance requirements onFtime and on budget. Our ISO9001F2008 certification is just one example of our commitment to producing a high quality, wellFdocumented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778F2300 Toll Free: /telephonesolid(888)597F9255 Fax: /telephonesolid(603)778F9797 EFmail: sales@wallindustries.com Web: www.wallindustries.com Address: 5 Watson Brook Rd. Exeter, NH 03833