DA473S6 SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Contact discharge 18kV guarantee (IEC61000-4-2).
  • 6-pin package containing 4 devices.
  • Halogen free compliance. Specifi cations Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Junction Temperature Tj 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Conditions Ratings Unit min typ max Reverse Voltage V R IR=1mA 6.0 7.7 V Reverse Current IR VR=5V 1 μA Interminal Capacitance CV R=0V, f=1MHz 30 pF ESD Discharge V ESD C=150pF , R=330Ω, Contact discharge (IEC61000-4-2) 18 kV Note) Electrical characteristics are for one diode. Marking : 4A 80509SP TK IM TC-00001756 SANYO Semiconductors DATA SHEET DA473S6 Silicon Diffused Junction Type Diode ESD Protection Diode www.semiconductor-sanyo.com/network

No. A1377-2/4 Package Dimensions Electrical Connection unit : mm (typ) 7028-010 1.6 1.6 1.50.05 0.5 0.05 0.560.25 0.2 0.2 1 32 64 5 1 : IN1 2 : GND 3 : IN2 4 : IN3 5 : GND 6 : IN4 SANYO : SCH6 654 123 1 : IN1 2 : GND 3 : IN2 4 : IN3 5 : GND 6 : IN4 Top view Reverse V oltage, VR -- V IR -- VR Reverse Current, IR -- A C -- VR Reverse V oltage, VR -- V Interterminal Capacitance, C -- pF C -- f Freqency, f -- MHz Interterminal Capacitance, C -- pF C -- f Interterminal Capacitance, C -- pF Freqency, f -- MHz 100m 10m 10μ 100n 10n 100μ IT14248 56789 0.1 1.0 57 2 3 57 1023 5 7 23 5 IT14250 VR=0V 0.1 1.0 57 2 3 57 1023 5 7 23 5 IT14251 VR=3.3V 0.1 1.0 10 23 5 7 23 5 7 IT14249 f=1MHz

No. A1377-3/4 ESD Suppressing Voltage Waveform (for reference) Note: In the above circuit, the oscilloscope may be destroyed when 8kV is applied without protection device. The ESD suppressing voltage waveform shown above is taken with one unit diode. Attenuator Evaluation method (IEC61000-4-2 contact discharge) DA473S6 HF oscilloscope GND plane ESD simulator IT14772 02 0 100 40 60 Time -- ns V oltage -- V IT14773 Applied voltage : 8kV (IEC61000-4-2 contact discharge) attenuation is corrected

No. A1377-4/4 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. PS This catalog provides information as of August, 2009. Specifi cations and information herein are subject to change without notice.