DA3DF30A PANASONIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Ver. AED This product complies with the RoHS Directive (EU 2002/95/EC). Publication date: July 2011 1 DA3DF30A Silicon epitaxial planar type For high frequency rectification Features Short reverse recovery time trr Soft recovery Packaging Tray : 50 pcs Absolute Maximum Ratings Ta = 25°C Parameter Symbol Rating Unit Repetitive peak reverse voltage VRRM 350 V Non-repetitive peak reverse surge voltage VRSM 350 V Forward current IF 20 A Non-repetitive peak forward surge current *1 IFSM 100 A Repetitive peak forward current *2 IFRM 150 A Junction temperature Tj 150 °C Storage temperature Tstg –40 to +150 °C Note) *1: 50 Hz sine wave 1 cycle (Non-repetitive peak current) *2: Pulse width < 10 ms. Peak value of the sine wave. (If repeative, RMS current < 20 A) Electrical Characteristics Ta = 25°C±3°C Parameter Symbol Conditions Min Typ Max Unit Forward voltage VF IF = 20 A 1.2 1.4 V Repetitive peak reverse current IRRM VRRM = 350 V 10 mA Reverse recovery time * trr IF = 0.5 A, VR = 1.0 V, Irr = 0.25 A 12 25 ns Thermal resistance (j-c) Rth(j-c) 4.0 °C/W Thermal resistance (j-a) Rth(j-a) 63 °C/W Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Absolute frequency of input and output is 10 MHz 3. *: trr measurement circuit 50 Ω 50 Ω 5.5 Ω D.U.T. IF IR 0.25 × IR trr Package Code TO-220D-A1 Pin Name 1: Anode 2: Cathode 3: Anode Marking Symbol: DAF30A
Ver. AED This product complies with the RoHS Directive (EU 2002/95/EC). DA3DF30A IF VF IR VR Ct VR 10−3 0 0.4 1.20.8 10−1 105 103 DA3DF30A_ IF-VF Forward current IF (mA) Forward voltage VF (V) 25°C −30°C Ta = 85°C 10−8 0 100 400300200 10−6 10−4 10−2 DA3DF30A_ IR-VR Reverse current IR (mA) Reverse voltage VR (V) 25°C −30°C Ta = 85°C 0 4010 20 30 250 200 100 150 Terminal capacitance Ct (pF) Reverse voltage VR (V) DA3DF30A_Ct-VR Ta = 25°C
Ver. AED This product complies with the RoHS Directive (EU 2002/95/EC). DA3DF30A TO-220D-A1 Unit: mm 5.08 ±0.5 9.9 ±0.3 15.0 ±0.513.7 ±0.2 1.4 ±0.2 1.6 ±0.2 0.8 ±0.1 φ3.2 ±0.1 0.40 ±0.05 1 2 3 3.0 ±0.5 4.2 ±0.2 4.6 ±0.2 2.9 ±0.2 2.6 ±0.1 2.54 ±0.3
Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or im- provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202