DA084 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Mounting PG 29 thread with union nut Torque 5 Nm Material plastic according to UL94 V-0, light grey weather proof and UV light resistant according to UL746C (f1) Sealing sealing gasket NBR Air interface ~ 1.5 cm² Dimensions Ø 65.5 x 30.5 mm Fitting position vertical¹ Operating/Storage temperature -45 to +70 °C (-49 to +158 °F) Approvals EAC Note Material adheres to limit values in accordance with RoHS3 ¹ Protection type is restricted to IP54 if fitting position of DA 084 is not vertical. PRESSURE COMPENSATION DEVICE DA 084 | IP55 Installation: Make cut-out Ø 37+1 mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure. It has become more and more important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations. The specially designed pressure compensation device DA 084 permits a controlled change in pressure and avoids the enterring of dust and water. The pressure compensation device is suitable for the use in enclosures and housings in accordance with DIN EN 62208. > High degree of protection > Easy to install Photo: Inside view Art. No. Protection type 1 packing unit Weight (approx.) 08400.0-02-9002 IP55 2 pieces 62 g (31 g / piece) www.stego-group.com 111 TECHNICAL DATASHEET