2SD2580 SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • High speed.
  • High breakdown voltage (VCBO =1500V).
  • High reliability (Adoption of HVP process).
  • Adoption of MBIT process.
  • On-chip damper diode. 1:Base 2:Collector 3:Emitter SANYO:TO3PML retemaraPl obmySs noitidnoCs gnitaRt inU egatloVesaB-ot-rotcelloCV OBC 0051V egatloVrettimE-ot-rotcelloCV OEC 008V egatloVesaB-ot-rettimEV OBE 6V tnerruCrotcelloCI C 01A )eslup(tnerruCrotcelloCI PC 03A noitapissiDrotcelloCP C 0.3W 07W erutarepmeTnoitcnuJj T 051 erutarepmeTegarotSg tsT 051+ot55– Tc=25˚C retemaraPl obmySs notidnoC sgnitaR tinU nimp ytx am tnerruCffotuCrotcelloCI OBC V BC I,V008= E 0=0 1A µ tnerruCffotuCrotcelloCI SEC V EC R,V0051= EB 0=0 .1A m egatloVniatsuSrotcelloCV )sus(OEC IC I,Am001= B 0=0 08V tnerruCffotuCrettimEI OBE V BE I,V4= C 0=0 40 31A m Continued on next page.

No.5796-2/4 2SD2580 0 123456789 1 0 1.0 0.1 1.0 10 1.0 0.1 22 35 7 2 35 7 0.1 1.0 1072 2 35 7 2 35 7 VCE =5V Ta=120˚C 25˚C -40˚C VCE =5V 25˚C -40˚C 25˚C 120˚C Ta = -40˚C Ta=120˚C IC /IB =5 IB =0 2.0A 0.2A 0.4A 0.6A 0.8A 1.0A 1.2A 1.4A 1.6A 1.8A hFE - IC IC - VCE IC - VBE VCE (sat) - IC DC Current Gain, hFE Collector Current, IC –A Collector Current, IC –A Collector Current, IC –A Collector-to-Emitter Voltage, VCE –V Collector Current, IC –A Base-to-Emitter Voltage, VBE –V Collector–to–Emitter Saturation Voltage, VCE (sat) –V OUTPUT PW=20 µs DC £1% INPUT 50W R L=33.3W IB1 IB2 VR R B 100µF 470µF VBE =–2V VCC =200V + + Switching Time Test Circuit retemaraPl obmySs notidnoC sgnitaR tinU nimp ytx am egatloVnoitarutaSrettimE-ot-rotcelloCV )tas(EC IC I,A8= B A6.1=5 V egatloVnoitarutaSrettimE-ot-esaBV )tas(EB IC I,A8= B A6.1=5 .1V niaGtnerruCCD h EF 1V EC I,V5= C A1=5 10 3 h EF 2V EC I,V5= C A8=5 8 emiTllaFt f IC I,A6= 1B I,A2.1= 2B A4.2–=3 .0s µ Continued from preceiding page.

No.5796-3/4 2SD2580 80 100 120 140 1606040200 80 100 120 140 16060402000 P C - Ta P C - Tc No heat sink Collector Dissipation, PC –W Ambient Temperature, Ta –°C Collector Dissipation, PC –W Case Temperature, Tc –°C 10 100 0.1 1.0 0.1 1.0 35 7 2 35 7 100023 5 7 10057 100023 5 23 5 7 7 0.1 1.0 1022 35 7 2 35 7 0.1 1.0 1072 3 5 72 3 5 7 1.0 0.1 1.0 0.1 V CC =200V IC /IB1 =5 IB2 /IB1 =2 R load tf tstg Tc=25˚C 1 pulse IC ICP PT=100 µs300 µs 1ms10ms PC =70W DC operation L=500 µH IB2 = -3A Tc=25˚C 1 pulse V CC =200V IC =6A IB1 =1.2A R load tf tstg Forward Bias A S O SW Time - IC SW Time - IB2 Reverse Bias A S O Collector-to-Emitter Voltage, VCE –V Base Current, IB2 –ACollector Current, IC –A Switching Time, SW Time –µs Switching Time, SW Time –µs Collector Current, IC –A Collector Current, IC –A Collector-to-Emitter Voltage, VCE –V

PS No.5796-4/4 This catalog provides information as of October, 1998. Specifications and information herein are subject to change without notice. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. 2SD2580