CXO STATEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SYSTEM CERTIFICATION ISO 9001
10106 Rev F
DESCRIPTION
Statek’s surface-mount CXO oscillators consist of a Statek miniature quartz crystal and a CMOS/TTL compatible hybrid circuit in a low-profile ceramic package with a small footprint. In addition to the conventional solder or epoxy electrical connection techniques, bond pads on the topside of the CXO allow it to be connected electrically in a hybrid assembly using wire bonds.
FEATURES
Designed for surface mount applications using infrared, vapor phase, or epoxy mount techniques CMOS and TTL compatible Low power consumption Optional Output Enable/Disable with Tri-State Low EMI emission High shock resistance Full military testing available Hermetically sealed ceramic package Wire bond pads for hybrids
APPLICATIONS
Military & Aerospace Smart munitions Cockpit systems Navigation Industrial, Computer & Communications Industrial controls Instrumentation Microprocessor clocks Medical Infusion pumps 0.070 (1.78) 0.060 (1.52) PLACEMENT COURTYARD 0.13 0 ( 3.30) 0.275 (6.99) inches (mm) CXO OSCILLATOR 300 kHz to 170 MHz Low Profile Miniature Surface Mount Crystal Oscillator™ TYPICAL MAXIMUM DIM inches mm inches mm A 0.400 10.16 0.405 10.29 B 0.180 4.57 0.190 4.83 C (SM1) 0.051 1.30 0.055 1.40 C (SM3/SM5) 0.055 1.40 0.063 1.60 D 0.340 8.64 0.350 8.89 E 0.125 3.18 0.135 3.43 F 0.050 1.27 0.060 1.52 SUGGESTED LAND PATTERN 0330 T60M TOP BOTTOMA B C F E D 32 23 144 1 PACKAGE DIMENSIONS actual size side view PIN CONNECTIONS 1. Enable/Disable (E or T) or not connected (N) 2. Ground 3. Output VDD Pb
Supply Voltage VDD -0.5 V to 7.0 V Storage Temperature -55 OC to +125OC Maximum Process Temperature 260OC for 20 seconds STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SYSTEM CERTIFICATION ISO 9001 Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Tighter specifications available. Please contact factory. Supply Voltage 300 kHz to 120 MHz2 5.0 V 10% 300 kHz to 170 MHz2 3.3 V 10% Calibration Tolerance3 100 ppm Frequency Stability 50 ppm for Commercial Over Temperature4 100 ppm for Industrial 100 ppm for Military Supply Current 3.3 V 5.0 V (Typical) 10 MHz 2 mA 4 mA
24 MHz 4 mA 8 mA
30 MHz 6 mA 10 mA
40 MHz 8 mA 12 mA
50 MHz 10 mA 14 mA
Duty Cycle 40% MIN, 60% MAX Aging, first year 10 ppm MAX Shock, survival 6 3,000 g, 0.3 ms, 1/2 sine Vibration, survival7 20 g , 10-2000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) 1. Other voltages available. Contact factory. 2. Not all frequencies available at all voltage/enable combinations. 3. Other tolerances available. 4. Does not include calibration tolerance. Other tolerances available. 5. Higher CMOS loads and TTL loads available. Contact factory. 6. Higher shock version available. Contact factory about CXOHG. 7. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. Note: All parameters are measured at ambient temperature with a 10M Ω ,15 pF load. PACKAGING OPTIONS CXO - Tray Pack - 16 mm tape, 7˝ or 13˝ reels Per EIA 418 (see Tape and Reel data sheet 10109) HOW TO ORDER CXO SURFACE MOUNT CRYSTAL OSCILLATORS “S” if special, custom design, or if the voltage is not 5.0 V. Otherwise, leave blank. CXO S T SM3 32.0M , Frequency K = kHz M = MHz Enable/Disable Option E, T or N Terminations Blank = SM1 = Gold Plated SM3 = Solder Dipped SM5 = Solder Dipped Lead Free 100 / 100 / / I // 200 / I Temp. Range: C= -10OC to +70OC I = -40OC to +85OC M= -55OC to +125OC S= Customer Specified Total Frequency Tolerance (in ppm) Temp. Range: C= -10OC to +70OC I = -40OC to +85OC M= -55OC to +125OC S= Customer Specified Frequency Stability over Temp.Range (in ppm) Calibration Tolerance @ 250C (in ppm) OR Pb ET When enabled (PIN 1 is high*) Output Freq. output Freq. output Oscillator Oscillates Oscillates Current consumption Normal Normal When disabled (PIN 1 is low) Output High Z state High Z state Oscillator Stops Oscillates Current consumption Very low Lower than normal When re-enabled (PIN 1 changes from low to high) Output recovery Delayed Immediate ENABLE/DISABLE OPTIONS (E/T/N) Statek offers three enable/disable options: E, T, and N. Both the E-version and T-version have Tri-State outputs and differ in whether the oscillator continues to run internally when the output is put into the high Z state: it stops in the E-version and continues to run in the T-version. So, the E-version offers very low current consumption when the oscillator is disabled and the T-version offers very fast output recovery when the oscillator is re-enabled. The N-version does not have PIN 1 connected internally and so has no enable/disable capability. The following table summarizes the three options. * When PIN 1 is allowed to float, it is held high by an internal pull-up resistor. COMPARISON OF ENABLE/DISABLE OPTIONS E AND T