STP6N62K3 STATEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 19

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Revision history

Features

■ 100% avalanche tested ■ Extremely high dv/dt capability ■ Gate charge minimized ■ Very low intrinsic capacitance ■ Improved diode reverse recovery characteristics ■ Zener-protected

Applications

■ Switching applications

Description

These SuperMESH3™ Power MOSFETs are the result of improvements applied to STMicroelectronics’ SuperMESH™ technology, combined with a new optimized vertical structure. These devices boast an extremely low on- resistance, superior dynamic performance and high avalanche capability, rendering them suitable for the most demanding applications. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited by maximum junction temperature.
  2. Pulse width limited by safe operating area.
  3. Pulse width limited by Tj max.

Table 3. Thermal data

2 Electrical characteristics

Table 4. On /off states Table 5. Dynamic

  1. Is defined as a constant equivalent capac itance giving the same charging time as C oss when VDS
  2. Is defined as a constant equivalent capac itance giving the same storage energy as C oss when VDS

Table 6. Switching times Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

Table 8. Gate-source Zener diode

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for TO-220, Figure 3. Thermal impedance for TO-220, Figure 4. Safe operating area for TO-220FP, Figure 5. Thermal impedance for TO-220FP, Figure 6. Safe operating area for IPAK Figure 7. Thermal impedance for IPAK

Figure 8. Output characteristics Figure 9. Transfer characteristics Figure 10. Gate charge vs gate-source voltage Figure 11. Static drain-source on-resistance Figure 12. Capacitance variations Figure 13. Output capacitance stored energy

0 Qg(nC)

3 Test circuits

Figure 19. Switching times test circuit for Figure 20. Gate charge test circuit Figure 21. Test circuit for inductive load Figure 22. Unclamped Inductive load test Figure 23. Unclamped inductive waveform Figure 24. Switching time waveform

4 Package mechanical data

Table 9. TO-220FP mechanical data

Figure 25. TO-220FP drawing

Table 10. I 2PAKFP (TO-281) mechanical data Figure 26. I 2PAKFP (TO-281) drawing

Figure 27. I²PAK (TO-262) drawing Table 11. I²PAK (TO-262) mechanical data

Table 12. TO-220 type A mechanical data

Figure 28. TO-220 type A drawing

Table 13. IPAK (TO-251) mechanical data

Figure 29. IPAK (TO-251) drawing

5 Revision history

Table 14. Document revision history 19-May-2006 1 First release. 02-May-2011 2 R G value has been updated. 06-Dec-2011 3 Removed p/n STD6N62K3 in DPAK.