CX1HT STATEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
DESCRIPTION
An increasing number of applications require the use of high-temperature crystals. For these applications, Statek offers the CX1 HT, CX4HT, and CX9 HT crystals. These crystals are designed to operate at temperatures up to and including 225ºC. The frequency range offered is 6 MHz to
250 MHz for CX1HT and 14 MHz to 250 MHz for CX4HT
and CX9 HT crystals. The expected life at 200ºC is in excess of 1,000 hours.
FEATURES
High temperature operation up to 225OC High shock resistance Hermetically sealed ceramic package STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
APPLICATIONS
DIM inches mm inches mm inches mm E 0.070 1.78 0.020 0.51 F 0.070 1.78 0.025 0.64 CX9HT CX4HT CX9HT HIGH TEMPERATURE CRYSTALS High Temperature/High Shock/High Frequency
6 MHz - 250 MHz 14 MHz - 250 MHz 14 MHz - 250 MHz
10184 Rev F
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com ABSOLUTE MAXIMUM RATINGS Storage Temperature -55 OC to 125OC Maximum Process Temperature 260 OC for 20 seconds “S” if special or custom design. Blank if Std. Frequency M = MHz Calibration Tolerance @ 250C (in ppm) SPECIFICATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Frequency Range See Specifications Table below Calibration Tolerance1 ± 100 ppm, or tighter, as required Operating Temperature Range -55OC up to +225OC Frequency-Temperature 125 ppm for -55 OC to +150OC Stability2 150 ppm for -55OC to +175OC 175 ppm for -55OC to +200OC 250 ppm for -55OC to +225OC Total Tolerance 200 ppm for +25OC to +200OC 300 ppm for +25OC to +225OC Aging, first year 5 ppm at 25 OC Shock, survival4 CX1HT: 1,000 g, 1 ms, 1/2 sine CX4HT: 5,000 g, 0.3 ms, 1/2 sine CX9HT: 5,000 g, 0.3 ms, 1/2 sine Vibration, survival4 20 g RMS, 10-2,000 Hz 1. Tighter frequency calibration available. Contact factory. 2. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the thickness-shear mode. 3. Includes calibration tolerance. 4. Higher shock and vibration available. PACKAGING OPTIONS Tray Pack 16 mm tape, 7” or 13” reels Per EIA 481 (see Tape and Reel data sheet # 10109) Terminations* SM1 = Gold Plated SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) CX1HT CX4HT CX9HT CX4HT S HG C SM1 20.0M , / / 200 / H Frequency Motional Resistance Motional Capacitance Shunt Capacitance Quality Factor Load Capacitance Range R1 @ 25°C C1 @ 25°C C0 @ 25°C Q @ 25°C CL Load Drive Level 6 MHz to 30 Ω @ 10 MHz 5.5 fF @ 10 MHz 2.2 pF @ 10 MHz 100 K @ 10 MHz 500 µW MAX. for f < 50 MHz CX1HT 250 MHz 25 Ω @ 32 MHz 6.2 fF @ 32 MHz 2.3 pF @ 32 MHz 30 K @ 32 MHz 10 pF 200 µW MAX. for f > 50 MHz 14 MHz to 75 Ω @ 16 MHz 1.5 fF @ 16 MHz 0.9 pF @ 16 MHz 90 K @ 16 MHz 200 µW MAX. for f < 50 MHz CX4HT 250 MHz 30 Ω @ 32 MHz 2.5 fF @ 32 MHz 1.1 pF @ 32 MHz 70 K @ 32 MHz 10 pF 100 µW MAX. for f > 50 MHz 14 MHz to 30 Ω @ 25 MHz 1.8 fF @ 25 MHz 1.0 pF @ 25 MHz 120K @ 25 MHz 200 µW MAX. for f < 50 MHz CX9HT 250 MHz 30 Ω @ 49 MHz 2.1 fF @ 49 MHz 1.0 pF @ 49 MHz 60 K @ 49 MHz 10 pF 100 µW MAX. for f > 50 MHz SPECIFICATIONS TABLE1 (Specifications shown are typical unless otherwise noted.) 1. For more detailed specifications on high frequency crystals, refer to standard high frequency crystal datasheets (CX1SM, CX4SM and CX9SM.) CONVENTIONAL CMOS PIERCE OSCILLATOR CIRCUIT HOW TO ORDER CX1HT, CX4HT and CX9HT CRYSTALS 100 / 175 / / H Temp. Range: H = 250C to 2000C S = Customer Specified Temp. Range Total Frequency Tolerance (in ppm) Calibration Tolerance @ 250C (in ppm) Frequency Stability over Temp. Range (in ppm) Frequency Stability over Temp. Range (in ppm) Temp. Range: H = 250C to 2000C S = Customer Specified Temp. Range Total Frequency Tolerance (in ppm) OR C = Ceramic Lid HG = High Shock otherwise leave blank