CTM600 CTMICRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Features

  • • •• High speed 10MBit/s
  • • •• High isolation voltage between input and output (Viso=3750 Vrms )
  • • •• Guaranteed CTR performance from 0° C to 70° C
  • • •• Wide operating temperature range of -40° C to 85° C
  • • •• Green Package
  • • •• Regulatory Approvals /square6 UL - UL1577 (E364000) /square6 VDE - EN60747-5-5(VDE0884-5) /square6 CQC – GB4943.1, GB8898 /square6 IEC60065, IEC60950 Package Outline Schematic Note: Different bending options available. See package dimension.

Description

The CTM600, CTM601, and CTM611 optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobe able output. The output of the detect IC is a high speed logic gate integrated with a photo detector. The switching parameters are guaranteed over the temperature range of -40° C to +85° C. A maximum input signal of 5mA will provide a minimum output sink current of 13mA (fan out of 8).

Applications

  • • •• Line receivers
  • • •• Telecommunication equipment
  • • •• High speed logic ground isolation
  • • •• Feedback loop in switch-mode power supplies
  • • •• Home appliances

Proprietary & Confidential Page 2 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Absolute Maximum Rating at 25 oC Symbol Parameters Ratings Units Notes VISO Isolation voltage 3750 V RMS 1 TOPR Operating temperature -40 ~ +100 oC TSTG Storage temperature -55 ~ +150 oC TSOL Soldering temperature 260 oC 2 Emitter IF Forward current 50 mA VR Reverse voltage 5 V PD Power dissipation 100 mW Detector PD Power dissipation 85 mW IO Average Output current 50 mA VCC Supply voltage 7 V VO Output voltage 7 V Notes 1. AC for 1 minute, RH = 40 ~ 60%. 2. For 10 second peak

Proprietary & Confidential Page 3 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler

Electrical Characteristics

TA = 0 - 70° C (unless otherwise specified). Typical values are measured at T A = 25 0C and V CC =5V Emitter Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes VF Forward voltage I F = 10mA - 1.4 1.6 V VR Reverse Voltage I R = 5 µA 5.0 - - V ∆VF/∆TA Temperature coefficient of forward voltage I F =10mA - -1.6 - mV/° C Detector Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes ICCL Logic Low Supply Current I F=10mA, V O=Open, V CC =5V - 9 13 mA ICCH Logic High Supply Current I F=0mA, V O=Open, V CC =5V - 6 9 mA Transfer Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes IOH Logic High Output Current IF=250uA, V O= 5.5V, 2 100 uA IFT Input Threshold Current VCC =5.5V, V O=0.6V, IO=13mA - 3.3 5 mA VOL Logic Low Output Voltage I F=5mA, I O=13mA, V CC =5.5V, - 0.35 0.6 V

Proprietary & Confidential Page 4 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Switching Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes TPHL Propagation Delay Time Logic High to Logic Low C L=15pF,RL=350 Ω - 40 75 ns TPLH Propagation Delay Time Logic Low to Logic High - 35 75 ns Tr Output Rise Time - 40 - ns Tf Output Fall Time - 10 - ns CM H Common Mode Transient Immunity at Logic High CTM600 IF = 7.5mA , V OH =2.0V, RL=350 Ω, TA=25° C, VCM =10Vp-p - - - V/µs CTM601 IF = 7.5mA , V OH =2.0V, RL=350 Ω, TA=25° C, VCM =50Vp-p 5000 - - CTM611 IF = 7.5mA , V OH =2.0V, RL=350 Ω, TA=25° C, VCM =1000Vp-p 20000 - - CM L Common Mode Transient Immunity at Logic Low CTM600 IF = 0mA , V OL =0.8V, RL=350 Ω, TA=25° C, VCM =10Vp-p - - - V/µs CTM601 IF = 0mA , V OL =0.8V, RL=350 Ω, TA=25° C, VCM =50Vp-p 5000 - - CTM611 IF = 0mA , V OL =0.8V, RL=350 Ω, TA=25° C, VCM =1000Vp-p 20000 - -

Proprietary & Confidential Page 5 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Typical Characteristic Curves

Proprietary & Confidential Page 6 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler

Proprietary & Confidential Page 9 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Package Dimension Dimensions in mm unless otherwise stated Recommended Solder Mask Dimensions in mm unless otherwise stated

Proprietary & Confidential Page 10 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Device Marking CT : Denotes “CT Micro” 600 : Product Number V : VDE Option Y : Fiscal Year WW : Work Week K : Production Code

Ordering Information

CTM6XX(V)(Z) X = Part No. (00, 01, or 11) V = VDE option (V or none) Z = Tape and reel option (T1 or T2) Option Description Quantity T1 Surface Mount Lead Forming – With Option 1 Taping 30 00 Units/Reel T2 Surface Mount Lead Forming – With Option 2 Taping 30 00 Units/Reel CT 600 VYWWK

Proprietary & Confidential Page 11 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Carrier Tape Specifications Dimensions in mm unless otherwise stated Option T1 Option T2

Proprietary & Confidential Page 12 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler Reflow Profile Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150° C Temperature Max. (Tsmax) 200° C Time (ts) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (t L to t P) 3° C/second max. Liquidous Temperature (T L) 217° C Time (t L) Maintained Above (T L) 60 – 150 seconds Peak Body Package Temperature 260° C +0° C / -5° C Time (t P) within 5° C of 260° C 30 seconds Ramp-down Rate (T P to T L) 6° C/second max Time 25° C to Peak Temperature 8 minutes max.

Proprietary & Confidential Page 13 Nov, 2015 CTM600, CTM601, CTM611 10Mbit/s 5-Pin Mini-Flat Logic Gate Optocoupler DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instruction for use provided in the labelling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.