CT2601

CT2601 CTMICRO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Features

• • •• High speed 10MBit/s
• • •• High isolation voltage between input and output (Viso=5000 Vrms )
• • •• Guaranteed performance from -40° C to 85° C
• • •• Wide operating temperature range of -55° C to 100° C
• • •• Regulatory Approvals /square6 UL - UL1577 (E364000) /square6 VDE - EN60747-5-5(VDE0884-5) /square6 CQC – GB4943.1, GB8898 /square6 IEC60065, IEC60950

Applications

• • •• Line receivers
• • •• Telecommunication equipment
• • •• Feedback loop in switch-mode power supplies
• • •• Home appliances
• • •• High speed logic ground isolation

Description

The CT2601 optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobab le output. This output features an open collector, there by permitting wired OR outputs. The switching parameters are guaranteed over the temperature range of -40° C to +85° C. A maximum input signal of 5mA will provide a minimum output sink current of 13mA (fan out of 8).

Proprietary & Confidential Page 2 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Absolute Maximum Rating at 25 oC Symbol Parameters Ratings Units Notes VISO Isolation voltage *1 5000 VRMS TOPR Operating temperature -55 ~ +85 oC TSTG Storage temperature -55 ~ +125 oC TSOL Soldering temperature *2 260 oC Emitter IF Forward current 50 mA VR Reverse voltage 5 V PI Power dissipation 100 mW Detector PO Power dissipation 85 mW IO Average Output current 50 mA VO Output voltage 7.0 V 1min(Max.) VCC Supply voltage 7.0 V VE Enable Input Voltage Not to Exceed VCC by more than 500mV 5.5 V

Proprietary & Confidential Page 3 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler

Electrical Characteristics

TA = -40 - 85° C (unless otherwise specified). Typical values are measured at T A = 25 0C and V CC =5V Emitter Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes VF Forward voltage IF = 10mA - 1.4 1.6 V VR Reverse Voltage IR = 10 µA 5.0 - - V ∆VF/∆TA Temperature coefficient of forward voltage IF =10mA - -1.8 - mV/° C Detector Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes ICCH Logic High Supply Current I F=0mA, V E=0.5V, V CC =5.5V - 6.5 10 mA ICCL Logic Low Supply Current I F=10mA, V E=0.5V, V CC =5.5V - 8.8 13 mA VEH High Level Enable Voltage I F=10mA, V CC =5.5V 2.0 - - V VEL Low Level Enable Voltage I F=10mA, V CC =5.5V - - 0.8 V IEH High Level Enable Current V E=0.5V, V CC =5.5V - -0.53 -1.6 mA IEL Low Level Enable Current V E=2.0V, V CC =5.5V - -0.75 -1.6 mA Transfer Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes IFT Input Threshold Current VCC =5.5V, V O=0.6V, VE=2.0V, I O=13mA - 2.5 5 mA IOH Logic High Output Current IF=250µA, V O=V CC =5.5V, VE =2.0V - 2.0 100 µA VOL Low Level Output Voltage IF=5mA, V CC =5.5V, V E=2.0V, IO=13mA - 0.35 0.6 V

Proprietary & Confidential Page 4 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler TA = -40 - 85° C (unless otherwise specified). Typical values are measured at T A = 25 0C, VCC =5V and I F= 7.5mA Switching Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes TPHL Output Propagation Delay High To Low C L= 15pF, R L= 350 Ω - 34 75 ns TPLH Output Propagation Delay Low to High - 39 75 ns PWD Pulse Width Distortion - 5 34 ns Tr Output Rise Time - 37 - ns Tf Output Fall Time - 10 - ns TELH Enable Propagation Delay Low To High VEH= 3.5V, C L= 15pF, R L= 350 Ω - 15 - ns TEHL Enable Propagation Delay High To Low - 15 - ns CM H Common Mode Transient Immunity at Logic High I F= 0mA, V CM = 50Vp-p, V OH = 2.0V, R L= 350 Ω 5000 - - V/µs CM L Common Mode Transient Immunity at Logic Low I F=7.5mA, V CM = 50Vp-p, VOH = 0.8V, R L= 350 Ω 5000 - - V/µs

Proprietary & Confidential Page 5 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Typical Characteristic Curves

Proprietary & Confidential Page 6 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler

Proprietary & Confidential Page 7 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Test Circuits Switching Time Test Circuit

Proprietary & Confidential Page 8 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Enable Switching Time Test Circuit

Proprietary & Confidential Page 9 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler CMR Test Circuit

Proprietary & Confidential Page 10 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Package Dimension Dimensions in mm unless otherwise stated Standard DIP – Through Hole Gullwing (400mil) Lead Forming – Through Hole (M Ty pe)

Proprietary & Confidential Page 11 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Surface Mount Lead Forming (S Type) Surface Mount (Low Profile) Lead Forming (SL Type)

Proprietary & Confidential Page 12 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Recommended Solder Mask Dimensions in mm unless otherwise stated Device Marking Note: CT : Denotes “CT Micro” 2601 : Product Number Y : Fiscal Year WW : Work Week K : Production Code CT 2601 YWWK

Proprietary & Confidential Page 13 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler

Ordering Information

CT2601Y(Z) Y = Lead form option (S, SL, M or none) Z = Tape and reel option (T1, T2 or none) Option Description Quantity None Standard 8 Pin Dip 45 Units/Tube M Gullwing (400mil) Lead Forming 45 Units/Tube S(T1) Surface Mount Lead Forming – With Option 1 Taping 10 00 Units/Reel S(T2) Surface Mount Lead Forming – With Option 2 Taping 10 00 Units/Reel SL(T1) Surface Mount (Low Profile) Lead Forming– With Option 1 Taping 1000 Units/Reel SL(T2) Surface Mount (Low Profile) Lead Forming– With Option 2 Taping 1000 Units/Reel

Proprietary & Confidential Page 14 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Carrier Tape Specifications Dimensions in mm unless otherwise stated Option S(T1) & SL(T1) Option S(T2) & SL(T2)

Proprietary & Confidential Page 15 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler Reflow Profile Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150° C Temperature Max. (Tsmax) 200° C Time (ts) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (t L to t P) 3° C/second max. Liquidous Temperature (T L) 217° C Time (t L) Maintained Above (T L) 60 – 150 seconds Peak Body Package Temperature 260° C +0° C / -5° C Time (t P) within 5° C of 260° C 30 seconds Ramp-down Rate (T P to T L) 6° C/second max Time 25° C to Peak Temperature 8 minutes max.

Proprietary & Confidential Page 16 Aug, 2013 CT2601 10MBit/s High Speed Logic Gate Optocoupler DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instruction for use provided in the labelling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.