DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

w .moxa.com CSM-200 Series 10/100BaseT(X) to 100BaseFX slide-in modules for the NRack System™ Features and Benefits

  • LFP (Link Fault Pass-Through) and FEF (Far End Fault)
  • Two different operation modes: store-and-forward and pass-through
  • Auto-negotiation
  • Plug and play
  • Hot-swappable Certifications Introduction The CSM-200 slide-in Ethernet-to-fiber media converters are designed for the NRack System™. The modules provide media conversion from 10/ 100BaseT(X) to 100BaseFX (SC/ST connectors), and can be installed in any NRack System™ chassis. Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode ST connector) CSM-200-1213: Multi-mode ST connector 100BaseFX Ports (multi-mode SC connector) CSM-200-1214: Multi-mode SC connector 100BaseFX Ports (single-mode SC connector) CSM-200-1218: Single-mode SC connector Magnetic Isolation Protection 1.5 kV (built-in)

w .moxa.com Standards IEEE 802.3u for 100BaseT(X) and 100BaseFX Optical Fiber 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652

800 MHz x km

Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Power Parameters Input Current 180 mA @ 12 VDC Input Voltage 12 VDC Overload Current Protection Supported Power Consumption 180 mA @ 12 VDC Physical Characteristics Weight Packaged: CSM-200-1213: 170 g (0.37 lb) CSM-200-1214/1218: 180 g (0.40 lb) Product only: CSM-200-1213: 115 g (0.25 lb) CSM-200-1214/1218: 125 g (0.28 lb) Environmental Limits Operating Temperature 0 to 55°C (32 to 131°F) Storage Temperature (package included) -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m

w .moxa.com IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs Environmental Testing IEC 60068-2-1 IEC 60068-2-14 IEC 60068-2-2 IEC 60068-2-3 Safety EN 60950-1, UL 60950-1 Vibration IEC 60068-2-6 MTBF Time 1,454,560 hrs Standards Telcordia (Bellcore), GB Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x CSM-200 Series module Documentation 1 x quick installation guide 1 x warranty card Dimensions CSM-200-1213

w .moxa.com CSM-200-1214, CSM-200-1218

Ordering Information

Model Name Fiber Module Type CSM-200-1213 Multi-mode ST CSM-200-1214 Multi-mode SC CSM-200-1218 Single-mode SC © Moxa Inc. All rights reserved. Updated Feb 20, 2020. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.