CSK060 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
L N STEGO - PRODUCT CATALOGUE TECHNICAL DATA Operating voltage AC/DC 120 –240 V¹ (min. 110 V, max. 265 V) Heating element PTC resistor – temperature limiting Surface temperature < +85 °C (+185 °F) (according to VDE 0100), except upper protective grille Connection 2-pole terminal 2.5 mm², torque 0.8 Nm max. Casing plastic according to UL94 V-0, black Dimensions 98 x 38 x 75 mm Mounting clip for 35mm DIN rail, EN 60715 Fitting position vertical airflow (air outlet up, connection on bottom) Operating/Storage temperature -45 °C to +70 °C (-49 °F to +158 °F) Operating/Storage humidity max. 90 % RH (non-condensing) Protection type/Protection class IP20 / II (double insulated) Approvals VDE, UL File No. E150057, EAC Note other voltages on request ¹ Operating with voltages below AC/DC 140 V reduces heating performance by approx 10 %. The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation. > Low surface temperature > Double insulated (plastic housing) > Wide voltage range > Dynamic heating up > Clip fixing Example of connection Thermostat FTO 011 (NC) Heater CSK 060 Art. No. Heating capacity² Inrush current max. Recommended pre-fuse T (time-delay) Weight (approx.) 06040.0-00 10 W 1.0 A 2.0 A 0.2 kg 06030.0-00 20 W 2.5 A 4.0 A 0.3 kg 06050.0-00 30 W 2.5 A 4.0 A 0.3 kg ² at +20 °C (+68 °F) ambient temperature TOUCH-SAFE SMALL HEATER (SEMICONDUCTOR) CSK 060 | 10 W, 20 W, 30 W HEATING TECHNICAL DATASHEET