CSD20060D CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- 600-Volt Schottky Rectifier
- Zero Reverse Recovery Current
- Zero Forward Recovery Voltage
- High-Frequency Operation
- Temperature-Independent Switching Behavior
- Extremely Fast Switching
- Positive Temperature Coefficient on VF Benefits
- Replace Bipolar with Unipolar Rectifiers
- Essentially No Switching Losses
- Higher Efficiency
- Reduction of Heat Sink Requirements
- Parallel Devices Without Thermal Runaway
Applications
- Switch Mode Power Supplies
- Power Factor Correction - Typical PFC P out : 2000W-4000W
- Motor Drives - Typical Power : 5HP-10HP Package TO-247-3 Maximum Ratings Symbol Parameter Value Unit Test Conditions Note VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V IF(AVG) Average Forward Current (Per Leg/Device) 10/20 16.5/33 A TC=150˚C TC=125˚C IF(Peak) Peak Forward Current 25/50 A TC=125˚, TREP<1 mS, Duty=0.5 IFRM Repetitive Peak Forward Surge Current (Per Leg/Device) 29/58 A TC=25˚C, tP=10 ms, Half Sine Wave TC=125˚C, tP=10 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current (Per Leg) 77 A TC=25˚C, tP=1.5 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current (Per Leg/Device) 250/500 A TC=25˚C, tP=10 µs, Pulse Ptot Power Dissipation (Per Leg) 138
46 W TC=25˚C
TC=125˚C TJ , Tstg Operating Junction and Storage Temperature -55 to +175 ˚C TO-247 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw Part Number Package Marking CSD20060D TO-247-3 CSD20060 VRRM = 600 V IF(AVG) = 20 A Qc = 56 nC
2.4 V IF = 10 A TJ=25°C
- This is a majority carrier diode, so there is no reverse recovery charge.
Figure 1. Forward Characteristics Figure 2. Reverse Characteristics
Figure 6. Power Derating
CSD20060D Rev. Q Package Dimensions Package TO-247-3 POS Inches Millimeters Min Max Min Max A .605 .631 15.367 16.027 B .800 .830 20.320 21.082 C .789 .800 20.05 20.31 D .095 .126 2.413 3.200 E .046 .052 1.168 1.321 F .060 .084 1.524 2.134 G .215 TYP .215 TYP H .180 .203 4.572 5.156 J .078 .081 1.982 2.057 K 6˚ 21˚ 6˚ 21˚ L 4˚ 6˚ 4˚ 6˚ M 2˚ 4˚ 2˚ 4˚ N 2˚ 4˚ 2˚ 4˚ P .090 .097 2.286 2.464 Q .020 .030 .508 .762 R 9˚ 11˚ 9˚ 11˚ S 9˚ 11˚ 9˚ 11˚ T 2˚ 8˚ 2˚ 8˚ U 2˚ 8˚ 2˚ 8˚ V .138 .144 3.505 3.658 W .210 .220 5.334 5.588 X .502 .557 12.751 14.148 Y .637 .695 16.180 17.653 Z .040 .052 1.016 1.321 AA .032 .046 .813 1.168 BB .110 .140 2.794 3.556 W X Y Z AA BB
6 CSD20060D Rev. Q This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright © 2006-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power Recommended Solder Pad Layout Part Number Package Marking CSD20060D TO-247-3 CSD20060 “The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. This part number was released previously with Sn/Pb solder plating as a standard industry finish. For more information please contact power_sales@cree.com “ TO-247-3 .12 .08 Diode Model Note: Tj = Diode Junction Temperature In Degrees Celcius VT RT Diode Model CSD20060 per Leg Vf T = VT + If*RT