CSD08060 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
600-Volt Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF Benefits Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway
Applications
Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 800W-1600W Motor Drives - Typical Power : 3HP-4HP Package TO-220-2 Maximum Ratings Symbol Parameter Value Unit Test Conditions Note VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V IF(AVG) Average Forward Current 8
12.5 A TC=150˚C, DC
TC=125˚C, DC IF(PEAK) Peak Forward Current 17.5 A TC=125˚C, TREP<1 mS, Duty=0.5 IFRM Repetitive Peak Forward Surge Current 33
23 A TC=25˚C, tP = 10 ms, Half Sine Wave
TC=125˚C, tP=10 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 69.5 A TC=25˚C, tp = 1.5 mS, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 220 A TC=25˚C, tP = 10 µs, Pulse Ptot Power Dissipation 107
35.7 W TC=25˚C
TC=125˚C TJ , Tstg Operating Junction and Storage Temperature -55 to +175 ˚C TO-220 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw PIN 1 PIN 2 CASE Part Number Package Marking CSD08060A TO-220-2 CSD08060
CSD08060 Rev. B Figure 2. Reverse Characteristics
Electrical Characteristics
Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.6 1.9 1.8
2.4 V IF = 8 A TJ=25°C
IF = 8 A TJ=175°C IR Reverse Current 50 100 200 1000 μA VR = 600 V TJ=25°C VR = 600 V TJ=175°C QC Total Capacitive Charge 22 nC VR = 600 V, IF = 8A di/dt = 500 A/μs TJ = 25°C C Total Capacitance 470 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Note: This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Unit RθJC Thermal Resistance from Junction to Case 1.4 °C/W Typical Performance Figure 1. Forward Characteristics
Figure 6. Power Derating
CSD08060 Rev. B This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright © 2006-2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power VT RT Diode Model CSD06060 Vf T = VT + If*RT Recommended Solder Pad Layout Part Number Package Marking CSD08060A TO-220-2 CSD08060 “The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. This part number was released previously with Sn/Pb solder plating as a standard industry finish. For more information please contact power_sales@cree.com “ TO-220-2 Note: Tj = Diode Junction Temperature In Degrees Celcius Diode Model VfT= VT+If*RT