CS15751 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Product Number CS15751_STRADA-2X2MX-8-DWC Family Strada Type Assembly Color clear Diameter 90x90 mm Height 11,13 mm Style square Optic Material Holder Material Fastening screw Status production ready ROHS Comliant Yes Date Updated 11/05/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector PSL440 sim: AsymmetricStreetligh...sim: 94 %sim: 0.520 - PSL445 sim: AsymmetricStreetligh...sim: 90 %sim: 0.378 - CXA/B 15xx asym deg Streetligh...94 % 0.480 Bender Wirth: Typ 441 2x2MX LUXEON M/MX sim: AsymmetricStreetligh...sim: 90 %- - May 30th 2017 4:05 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10
24240 SALO, Finland
http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001
D E C F B G A H Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L INDEX PART NO DESCRIPTION MATERIAL COLOUR
1 C15676 STRADA-2X2MX-8-DWC PMMA
C15757 STRADA-2X2MX-8-SEAL Silicone SCALE 1:1 WEIGHT 41,7 g SHEET 1/1 SIZE DRAWING TITLE CS15751_STRADA-2X2MX-8-DWC PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. CS15751 3.45 Front view Scale: 1:1 13.6 Bottom view Scale: 1:1
2 Rear view
Scale: 1:1 Isometric view Scale: 1:1
NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.