CS14895 CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 29

Technical content

Product Number CS14895_HB-IP-2X6-RS Family HighBay Type Assembly Color clear Diameter 173 + 71,4 mm Height 11,39 mm Style rectang Optic Material PMMA Holder Material Fastening pin, screw Status production ready ROHS Comliant Yes Date Updated 24/05/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XM-L 21 deg Real spot 94 % 5.100 - XP-G2 13 deg Real spot 94 % 10.600 - XP-L 20 deg Real spot 93 % 5.400 - XP-L2 22 deg Real spot 93 % 4.100 - H35C1 (LEMWA33) sim: 14 Real spot sim: 93 %sim: 9.900 - LUXEON XR-TX (L2T0-xxyy012M) 14 deg Real spot 92 % 10.120 - LUXEON T 15 deg Real spot 94 % 8.800 - LUXEON 5050 sim: 23 Real spot sim: 91 %sim: 3.740 - NVSxE21A 13 deg Real spot 94 % 7.950 - Oslon Square Gen3 sim: 12 Real spot sim: 90 %sim: 14.000 - Duris P8 sim: 12 Real spot sim: 89 %sim: 13.000 - Fortimo FastFlex LED board 2x6 DP G4 13 deg Real spot 94 % 10.600 - Z5M1/Z5M2 14 deg Real spot 94 % 10.000 - Z8Y22P 17 deg Real spot 92 % 6.600 - June 13th 2017 8:01 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10

24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

D E C F B G A H Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L SCALE 1:1 WEIGHT SHEET SIZE DRAWING TITLE PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A3 clear INDEX PART NO DESCRIPTION MATERIAL COLOUR

1 C14018 2X6-SEAL25 Silicone

2 C14887 HB-IP-2X6-RS PMMA

CS14895_HB-IP-2X6_Mechanical model CS14895 58,8 g 54.2 54.2 54.2 44.9( ) PCB typically 45mm 50.8 25.4 25.4 146.5( ) PCB typically 146,6mm 1.7 Wiring: PCB is fully sealed between the lens with silicone seal and the heatsink. Wiring needs to be done through the PCB and heatsink to maintain high IP rating. LED position B A 173 71.4 Fasten middle screws first. Recommended torque with pan head screw: 0.57Nm (for 1.6mm thick PCB, no thermal pad) 3.4 D D E E 11.395.35 3.2 3.2 Detail B Scale 2:1 3.2 Detail A Scale 2:1 3.4 M3 screw size 5.35 Section view D-D Scale 2:1 1.6 (1.6mm pcb) 9.64 1.65 (silicone) 2.65 (rib) Section view C-C Scale 1:1 Ribs Silicone seal is tested to work in LEDiL test assemblies. Customer is recommended to test the sealing in the end product due many variables, such as heat sink surface and possible chemical traces

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.