CR08AS

CR08AS MITSUBISHI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR 〉 CR08AS LOW POWER USE NON-INSULATED TYPE, GLASS PASSIVATION TYPE CR08AS APPLICATION Solid state relay, strobe flasher, ignitor, hybrid IC Symbol VRRM VRSM VR (DC) VDRM VD (DC) Parameter Repetitive peak reverse voltage Non-repetitive peak reverse voltage DC reverse voltage Repetitive peak off-state voltage]1 DC off-state voltage ]1 Voltage class Unit V V V V V MAXIMUM RATINGS 8 (marked “AD”) 400 500 320 400 320 12 (marked “AF”) 600 720 480 600 480 Symbol IT (RMS) IT (AV) ITSM I2t PGM PG (AV) VFGM VRGM IFGM Tj Tstg Parameter RMS on-state current Average on-state current Surge on-state current I 2t for fusing Peak gate power dissipation Average gate power dissipation Peak gate forward voltage Peak gate reverse voltage Peak gate forward current Junction temperature Storage temperature Weight Conditions Commercial frequency, sine half wave, 180° conduction, T a=51°C]2 60Hz sine half wave 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Typical value Unit A A A A W W V V A mg Ratings 1.26 0.8 0.42 0.5 0.1 0.3 –40 ~ +125 –40 ~ +125 ]1. With Gate-to-cathode resistance RGK =1kΩ 1/CR 2/CR T

1 TERMINAL

4.4±0.1 1.5±0.11.6±0.2 0.4±0.07

0.8 MIN

2.5±0.1 3.9±0.3 0.4+0.03 –0.05 1 2 3 (Back side) OUTLINE DRAWING Dimensions in mm SOT-89 0.5±0.07 1.5±0.1 1.5±0.1

Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR 〉 CR08AS LOW POWER USE NON-INSULATED TYPE, GLASS PASSIVATION TYPE ]2. Soldering with ceramic plate (25mm × 25mm × t0.7). ]3. If special values of IGT are required, choose at least two items from those listed in the table below. (Example: AB, BC) The above values do not include the current flowing through the 1kΩ resistance between the gate and cathode. B 20 ~ 50 Item IGT (µA) A 1 ~ 30 C 40 ~ 100

ELECTRICAL CHARACTERISTICS

Tj=125°C, VRRM applied, RGK =1kΩ Tj=125°C, VDRM applied, RGK =1kΩ Ta=25°C, ITM =2.5A, instantaneous value Ta=25°C, VD =6V, IT=0.1A ]4 Tj=125°C, VD=1/2VDRM , RGK =1kΩ Tj=25°C, VD =6V, IT=0.1A ]4 Tj=25°C, VD=12V, RGK =1kΩ Junction to ambient ]2 Unit mA mA V V V µA mA °C/W Typ. 1.5 Symbol I RRM IDRM VTM VGT VGD IGT IH R th (j-a) Parameter Repetitive peak reverse current Repetitive peak off-state current On-state voltage Gate trigger voltage Gate non-trigger voltage Gate trigger current Holding current Thermal resistance Limits Min. 0.2 Max. 0.5 0.5 1.5 0.8 100 ] 3 DC IGS IGT DC 60Ω VGT TUT 1kΩ R GK A3 A2 SWITCH 1 : IGT measurement SWITCH 2 : VGT measurement (Inner resistance of voltage meter is about 1kΩ ) ]4. IGT , VGT measurement circuit. SWITCH 100 23 5 7 1 0 1 23 5 7 1 0 244 501 4 23 102 101 100 10–1 Ta = 25°C MAXIMUM ON-STATE CHARACTERISTICS ON-STATE CURRENT (A) ON-STATE VOLTAGE (V) RATED SURGE ON-STATE CURRENT SURGE ON-STATE CURRENT (A) CONDUCTION TIME (CYCLES AT 60Hz) PERFORMANCE CURVES

Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR 〉 CR08AS LOW POWER USE NON-INSULATED TYPE, GLASS PASSIVATION TYPE 102 10–2 100 101 10–1 100 10–223 57 23 57 10123 57 10223 57 2310–1 VFGM = 6V VGT = 0.8V IGT = 100µA (Tj = 25°C) PGM = 0.5W PG(AV) = 0.1W VGD = 0.2V IFGM = 0.3A 16060–20–40 0 20 40 80 100120140 103 102 101 100 TYPICAL EXAMPLE 1.0 0.8 0.7 0.6 0.3 0.4 0.1 0 120–40 –20 20 80 0.2 0.5 0.9 06 0 40 100 TYPICAL EXAMPLE DISTRIBUTION 1.6 1.2 0.6 0.4 0.2 1.4 1.0 0.8 0 1.60 θ 360° θ = 30°60° 120°90° 180° RESISTIVE, INDUCTIVE LOADS MAXIMUM AVERAGE POWER DISSIPATION (SINGLE-PHASE HALF WAVE) AVERAGE POWER DISSIPATION (W) AVERAGE ON-STATE CURRENT (A) MAXIMUM TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION TO AMBIENT) TRANSIENT THERMAL IMPEDANCE (°C/W) TIME (s) ALLOWABLE AMBIENT TEMPERATURE VS. AVERAGE ON-STATE CURRENT (SINGLE-PHASE HALF WAVE) AMBIENT TEMPERATURE (°C) AVERAGE ON-STATE CURRENT (A) GATE TRIGGER VOLTAGE VS. JUNCTION TEMPERATURE GATE TRIGGER VOLTAGE (V) JUNCTION TEMPERATURE (°C) GATE VOLTAGE (V) GATE CURRENT (mA) GATE TRIGGER CURRENT VS. JUNCTION TEMPERATURE JUNCTION TEMPERATURE (°C) 23100 571 01 23 57 1 02 23 57 1 03 101 2310–3 57 1 0–2 23 57 1 0–1 23 57 1 00 103 102 100 ALUMINUM BOARD WITH SOLDERING 25 25 t0.7 160 120 140 100 0 1.60 θ = 30° 60° 120° 90° 180° θ 360° RESISTIVE, INDUCTIVE LOADS NATURAL CONVECTION ALUMINUM BOARD WITH SOLDERING 25 25 t0.7 GATE CHARACTERISTICS 100 (%)GATE TRIGGER CURRENT (T j = t°C) GATE TRIGGER CURRENT (T j = 25°C)

Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR 〉 CR08AS LOW POWER USE NON-INSULATED TYPE, GLASS PASSIVATION TYPE ALLOWABLE AMBIENT TEMPERATURE VS. AVERAGE ON-STATE CURRENT (SINGLE-PHASE HALF WAVE) AMBIENT TEMPERATURE (°C) AVERAGE ON-STATE CURRENT (A) 160 120 140 100 0 0.80 θ 360° θ = 180° 65°C/W 90°C/W R th(j – a) = 200°C/W NATURAL CONVECTION RESISTIVE, INDUCTIVE LOADS 160 120 140 100 0 160–40 0 40 80 120140–20 20 60 100 R GK = 1kΩ TYPICAL EXAMPLE 1.6 1.2 0.6 0.4 0.2 1.4 1.0 0.8 0 1.60 θ = 30°60° 120°90° 180° θ θ 360° RESISTIVE LOADS 1.6 1.2 0.6 0.4 0.2 1.4 1.0 0.8 0 1.60 θ = 30°60° 120° 90° 180° 270° DC θ 360° RESISTIVE, INDUCTIVE LOADS MAXIMUM AVERAGE POWER DISSIPATION (SINGLE-PHASE FULL WAVE) AVERAGE POWER DISSIPATION (W) AVERAGE ON-STATE CURRENT (A) ALLOWABLE AMBIENT TEMPERATURE VS. AVERAGE ON-STATE CURRENT (SINGLE-PHASE FULL WAVE) AMBIENT TEMPERATURE (°C) AVERAGE ON-STATE CURRENT (A) MAXIMUM AVERAGE POWER DISSIPATION (RECTANGULAR WAVE) AVERAGE POWER DISSIPATION (W) AVERAGE ON-STATE CURRENT (A) ALLOWABLE AMBIENT TEMPERATURE VS. AVERAGE ON-STATE CURRENT (RECTANGULAR WAVE) AMBIENT TEMPERATURE (°C) AVERAGE ON-STATE CURRENT (A) BREAKOVER VOLTAGE VS. JUNCTION TEMPERATURE JUNCTION TEMPERATURE (°C) 100 (%)BREAKOVER VOLTAGE (T j = t°C) BREAKOVER VOLTAGE (T j = 25°C) 160 120 140 100 0 1.60 θ θ 360° θ = 30° 120° 90° 180° 60° RESISTIVE LOADS NATURAL CONVECTION ALUMINUM BOARD WITH SOLDERING 25 25 t0.7 160 120 140 100 0 1.60 DC θ = 30° 120° 180° 270°60° 90° θ 360° RESISTIVE, INDUCTIVE LOADS NATURAL CONVECTION ALUMINUM BOARD WITH SOLDERING 25 25 t0.7

Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR 〉 CR08AS LOW POWER USE NON-INSULATED TYPE, GLASS PASSIVATION TYPE 101100 102 4.0 2.0 2.5 3.0 3.5 1.0 1.5 0.5 2310–1 571 00 23 57 1 01 23 57 1 020 100 120 TYPICAL EXAMPLE Tj = 125°C BREAKOVER VOLTAGE VS. GATE TO CATHODE RESISTANCE GATE TO CATHODE RESISTANCE (k Ω ) 100 (%)BREAKOVER VOLTAGE (R GK = rkΩ ) BREAKOVER VOLTAGE (R GK = 1kΩ ) 23100 571 01 23 57 1 02 23 57 1 03 160 100 120 140 Tj = 125°C R GK = 1kΩ TYPICAL EXAMPLE 2310–1 571 00 23 57 1 01 23 57 1 02 500 300 400 100 200 100 2310–1 571 00 23 57 1 01 23 57 1 02 102 101 10–1 VD = 100V R L = 47Ω R GK = 1kΩ Ta = 25°C TYPICAL EXAMPLE 60–20–40–60 0 20 40 80 100120140 101 100 10–1 10–2 HOLDING CURRENT VS. JUNCTION TEMPERATURE HOLDING CURRENT (mA) JUNCTION TEMPERATURE (°C) HOLDING CURRENT VS. GATE TO CATHODE RESISTANCE GATE TO CATHODE RESISTANCE (k Ω ) 100 (%)HOLDING CURRENT (R GK = rkΩ ) HOLDING CURRENT (R GK = 1kΩ ) BREAKOVER VOLTAGE VS. RATE OF RISE OF OFF-STATE VOLTAGE RATE OF RISE OF OFF-STATE VOLTAGE (V/µs) 100 (%)BREAKOVER VOLTAGE (dv/dt = vV/µs) BREAKOVER VOLTAGE (dv/dt = 1V/µs) TURN-ON TIME VS. GATE CURRENT TURN-ON TIME (µs) GATE CURRENT (mA) HOLDING CURRENT VS. GATE TRIGGER CURRENT HOLDING CURRENT (mA) GATE TRIGGER CURRENT (µA) DISTRIBUTION IGT (25°C) = 35µA R GK = 1kΩ TYPICAL EXAMPLE # 1 Tj = 25°C Tj = 25°C TYPICAL EXAMPLE IGT (25°C) IH (1kΩ ) # 1 25µA 0.9mA

Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR 〉 CR08AS LOW POWER USE NON-INSULATED TYPE, GLASS PASSIVATION TYPE 0 1600 40 80 120 14020 60 100 VD = 50V, VR = 50V IT = 2A, RGK = 1kΩ TYPICAL EXAMPLE DISTRIBUTION TURN-OFF TIME VS. JUNCTION TEMPERATURE TURN-OFF TIME (µs) JUNCTION TEMPERATURE (°C) 160 120 100 0 160–40–20 20 80 140 120 140 06 0 40 100 TYPICAL EXAMPLE GATE TRIGGER CURRENT VS. GATE CURRENT PULSE WIDTH GATE CURRENT PULSE WIDTH (µs) 100 (%)GATE TRIGGER CURRENT (tw) GATE TRIGGER CURRENT (DC ) REPETITIVE PEAK REVERSE VOLTAGE VS. JUNCTION TEMPERATURE JUNCTION TEMPERATURE (°C) THERMAL IMPEDANCE VS. BOARD DIMENSIONS THERMAL IMPEDANCE (°C/W) BOARD DIMENSIONS (mm) REGULAR SQUARE ONE SIDE 320 240 120 280 200 160 0 800 20 40 60 7010 30 50 t0.7 ALUMINUM BOARD WITHOUT EPOXY PLATE 10×10 EPOXY PLATE WITH COPPER FOIL 100 (%)REPETITIVE PEAK REVERSE VOLTAGE (T j = t°C) REPETITIVE PEAK REVERSE VOLTAGE (T j = 25°C) 102 100 10124 35 7 1 0 224 35 7 104 103 101 Tj = 25°C TYPICAL EXAMPLE IGT (DC) # 1 10µA # 2 65µA # 1 # 2