CPF5US03 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Input Voltage • 85-264 VAC (110-370 VDC) Input Frequency • 47-440 Hz Input Current • 0.3 A max (110 VAC I o = 100%) Inrush Current • 15 A typical (110 VAC I o = 100%),
30 A typical (230 VAC = Io 100%)
Earth Leakage • 0.5 mA max at 230 VAC 60 Hz Current Output Output Voltage • See Table Minimum Load • No minimum load required Start-Up Delay • 700 ms max at rated input & load Hold-Up Time • 10 ms min Initial Set Accuracy • -3%, +6% max Drift • 0.6% max Line Regulation • See Table Load Regulation • See Table Ripple & Noise • 260 mV pk-pk max, 20 MHz bandwidth Overvoltage • Operates >115% Vnom, clamps by Protection zener diode Overcurrent • Operates >125% of rating, Protection auto recovery Temperature • 0.04%/°C Coefficient General Efficiency • See Table Isolation • 3000 VAC Input to Output
2000 VAC Input to Ground
500 VAC Output to Ground
Switching Frequency • 100 kHz typical Environmental Operating • -10 °C to +55 °C (derate linearly above Temperature +55 °C to 25% at +70 °C) Storage • -20 °C to +75 °C Temperature Humidity • 20-95% RH non-condensing Shock • 20 G 11 ms once each X, Y & Z axis Vibration • 2 G 10-55 Hz 3 min period for 60 mins along X, Y & Z axis EMC & Safety Emissions • EN55022 Level B conducted EN55022 Level B radiated ESD Susceptibility • EN61000-4-2 Level 3 Air, Level 2 Contact Radiated • EN61000-4-3 Level 3 Susceptibility EFT/Burst • EN61000-4-4 Level 3 Surge • EN61000-4-5 Level 3 line to line, Level 4 line to ground Safety Approvals • UL1950, C-UL, EN60950, VDE 0160 5-10 Watts CPF Series AC-DC PCB Mount Specification THE XP ERTS IN POWER www.xpplc.com sales@xpplc.com
OUTPUT VOLTAGE & CURRENT RATINGS CPF 1. Peak rating duration ≤10 seconds with a max duty cycle of 35%.. 2. Measured low line to high line. 3. Measured no load to full load. Notes CPF Board www.xpplc.com sales@xpplc.com Output Output Peak Efficiency Line Load Model Voltage Current Current (1) Typical Regulation (2) Regulation (3) Number 3.3 V 1.00 A 1.20 A 68% 20 mV 40 mV CPF5US03 5.0 V 1.00 A 1.20 A 77% 20 mV 40 mV CPF5US05 12.0 V 0.45 A 0.54 A 78% 48 mV 100 mV CPF5US12 15.0 V 0.35 A 0.42 A 77% 60 mV 120 mV CPF5US15 24.0 V 0.22 A 0.27 A 81% 96 mV 150 mV CPF5US24 3.3 V 2.00 A 2.40 A 65% 20 mV 40 mV CPF10US03 5.0 V 2.00 A 2.04 A 74% 20 mV 40 mV CPF10US05 12.0 V 0.90 A 1.08 A 78% 48 mV 100 mV CPF10US12 15.0 V 0.70 A 0.84 A 81% 60 mV 120 mV CPF10US15 24.0 V 0.45 A 0.54 A 81% 96 mV 150 mV CPF10US24 The CPF board is designed to accept any of the CPF Series models. Order CPFBOARD-M for molex connectors or CPFBOARD-T for screw terminals. Mounting hole M3 clearance. Mating Housing Molex 09-91-0500 Crimp Pins Molex 15-04-0219 Mounting hole M3 clearance. All connections screw terminals 10 mm pitch CPFBOARD-M CPFBOARD-T
5 W MODEL 10 W MODEL
Dimensions in inches (mm). Weight 30g Weight 40g Max height 17.5 mm Rev 3.0