CPC15UT1 XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Small, Compact PCB Format Isolated Auxiliary Outputs Low Noise 85-264 VAC Universal Input Optional Covers & Looms International Safety Approvals Input Input Voltage • 85-264 VAC (110-370 VDC) Input Frequency • 47-440 Hz Inrush Current • 60 A max at 200 V input & full load (cold start) Output Hold-Up Time • 10 ms min at 85 V input & full load (100 ms typical at 200 V input) Output Voltage • See Table, 5 V adjustable, V1 is isolated from V2 & V3 Output Voltage • 5 V ±5% Adjustment Output Voltage • ±6% max Set Point Line Regulation • 0.4% max over specified input range Load Regulation • 2% 5 V output, 1% auxiliary outputs Ripple & Noise • 40 mV pk-pk typical (180 mV pk-pk max) Minimum Load • No minimum load - See Note 3 Short Circuit & • Operates >105% of rating Overload Protection auto recovery Overvoltage • Operates >115% of rating +5 V output Protection General Switching Frequency • Variable frequency 40-400 kHz dependant on line & load Efficiency • 70-72% typical Isolation • Input to output 3000 VAC for 1 min,

500 VDC, 50 Mohm

Input to earth 2000 VAC for 1 min, Output to earth 500 VAC for 1 min, Leakage Current • 0.75 mA max. Mating Connectors • Available as an option Cable Looms • Available as an option Covers • Available as an option Environmental Operating • -10°C to +70°C, derate above +50 °C Temperature Consult Sales Office Storage • -20 °C to +75 °C Temperature Relative Humidity • 20-90% non-condensing Vibration • 10-55 Hz at 2 G, 3 mins period for 60 mins along X, Y & Z axis Shock • 20 G for 11 ms, once on X, Y & Z axis EMC & Safety EMC • FCC curve B, EN55022B Safety Approvals • Approved to UL1950, IEC950, CSA22.2 No.234, EN60950 15-60 Watts CPC Series Triple Output Switchers Specification THE XP ERTS IN POWER www.xpplc.com sales@xpplc.com

www.xpplc.com sales@xpplc.com AC-DC Power SuppliesTriple Output Switchers 15-60 Watts CPC Series 1. Isolated from 2 & 3. 2. Linear regulated.. 3. The specified output currents are available for a maximum duration of 10 s if the average current level is below rating and the total power is below rating for the unit. Outputs 2 & 3 may be loaded to 80% of their rated current when +5 V is not loaded. ‘FG’ terminal should be used as AC input earth. It is isolated from the DC output. 4. Mating input & output connectors are available. Example: order as CPC30 CON KIT for 30 watt models. 5. Loom kit option: comprising of 2 x 300 mm length cable looms, one terminated with a mating connector for input and the other for output terminals. 6. Cover option: wrap around chassis & safety cover supplied as a kit or fitted. Notes OUTPUT VOLTAGE & CURRENT RATINGS CPC Output Output Ratings Model Power Output 1 (1) Output 2 (2) Output 3 (2) Number PIN ASSIGNMENT CN1 CN2I/O Connector Mating Connector (Terminal) CN1 B3P5-VH VHR-5N (SVH-21T-1.1 or SVH-21-P1.1) CN2 B8B-XH-A XHP-8 (BXH-001T-P0.6 or SXH-001T-P0.6) Pin No. Input

1 AC(L)

3 AC(N)

Pin No. Input 1V 1 2V 1 3G 1 4G 1 5V 2 6G 2 7G 2 8V 3 Mfr: JST NOTES:

2 A per pin maximum for CN2

Weight: 150g or less Tolerance: + Dimensions in mm PWB Material: Glass composite (CEM3) Mechanical Details - 15 Watt Models Fuse Rating 250 V T2 A Supplied as cover kit (not fitted). Order as CPC15/COVER KIT Supplied fitted use suffix C e.g. CPC15UT1-C Covered VersionPCB Version

www.xpplc.com sales@xpplc.com Supplied as cover kit (not fitted). Order as CPC30/COVER KIT Supplied fitted use suffix C e.g. CPC30UT1-C Covered Version PIN ASSIGNMENT CN1 CN2 I/O Connector Mating Connector (Terminal) CN1 B3P5-VH VHR-5N (SVH-21T-1.1 or SVH-21-P1.1) CN2 B6P-VH VHR-6N (SVH-21T-1.1 or SVH-21T-P1.1)) Pin No. Input Pin No. Input 1V 3 2G 2 3G 2 4V 2 5G 1 6V 1 Fuse Rating 250 V T3 A Mfr: JST PCB Version Mechanical Details - 30 Watt Models Mechanical Details - 60 Watt Models NOTES: Weight: 220g or less Tolerance: + Dimensions in mm PWB Material: Glass composite (CEM3) PIN ASSIGNMENT CN1 CN2 Pin No. Input Pin No. Input 1V 3 2G 2 3G 2 4V 2 5G 1 6G 1 7V 1 8V 1 Fuse Rating 250 V T3 A PCB Version Covered Version Supplied as cover kit (not fitted). Order as CPC60/COVER KIT Supplied fitted use suffix C e.g. CPC60UT1-C I/O Connector Mating Connector (Terminal) CN1 B3P5-VH VHR-5N (SVH-21T-1.1 or SVH-21-T-P1.1) CN2 B8P-VH VHR-8N(SVH-21T-1.1 or SVH-21T-P1.1) Mfr: JST NOTES:

5 A per pin maximum for CN2

Weight: 300g or less Tolerance: + Dimensions in mm PWB Material: Glass composite (CEM3)

www.xpplc.com sales@xpplc.com AC-DC Power SuppliesTriple Output Switchers 15-60 Watts CPC Series Loom Kit - 15 Watt Models Loom Kit - 30 Watt Models Loom Kit - 60 Watt Models LOOM KITS CPC Pin No. Wire Gauge Colour Input 1 0.5 mm Brown L 2--- 3 0.5 mm Blue N 4--- 5 0.5 mm Grn/Yel E Pin No. Wire Gauge Colour Output 1 & 2 22 AWG Red V 1 3 & 4 22 AWG Black G 1 5 22 AWG Yellow V 2 6 & 7 22 AWG Black G 2 8 22 AWG Grey V 31 11.81” (300 mm) M M Input Connector Output Connector 11.81” (300 mm) M M 11.81” (300 mm) M M Input Connector Input Connector Output Connector Output Connector 11.81” (300 mm) M M 11.81” (300mm) M M 11.81” (300 mm) M M Order as CPC 15 Loom KT Order as CPC 30 Loom KT Order as CPC 60 Loom KT Pin No. Wire Gauge Colour Input 1 0.5 mm Brown L 2--- 3 0.5 mm Blue N 4--- 5 0.5 mm Grn/Yel E Pin No. Wire Gauge Colour Output 1 0.5 mm Grey V 3 2 & 3 0.5 mm Black G 2 4 0.5 mm Yellow V 2 5 0.5 mm Black G 1 6 0.5 mm Red V 1 Pin No. Wire Gauge Colour Output 1 & 2 0.5 mm Grey V 3 2 & 3 0.5 mm Black G 2 4 0.5 mm Yellow V 2 5 & 6 0.5 mm Black G 1 7 & 8 0.5 mm Red V 1 Pin No. Wire Gauge Colour Input 1 0.5 mm Brown L 2--- 3 0.5 mm Blue N 4--- 5 0.5 mm Grn/Yel E Rev 2.0