CPC1317 CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Description

Ordering Information

 Security  Sensor Circuitry  Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Aerospace  Industrial Controls  100% Solid State  Low Drive Power Requirements (TTL/CMOS Compatible)  No Moving Parts  High Reliability  Arc-Free With No Snubbing Circuits  3750Vrms Input/Output Isolation  No EMI/RFI Generation  Machine Insertable, Wave Solderable The CPC1317 is a single-pole normally open (1-Form-A) solid state relay with bi-directional transient voltage suppressor (TVS) relay protection, which is designed to meet the requirements of EN50130-4 (installation class 3). The relay output is constructed with efficient MOSFET switches and photovoltaic die that use Clare's patented OptoMOS architecture. The input, a highly efficient GaAlAS infrared LED, controls the optically coupled output. The CPC1317 is available in an 8-pin, space-saving surface-mount package. Switching Characteristics of Normally Open (Form A) Devices Control ILOAD 10% 90% tON tOFF Approvals  UL Recognized Component: File # E76270  EN/IEC 60950 Compliant  CSA Certified Component: Certificate # 1172007 Transient Protection Characteristics Peak Pulse Power V WM 600W 40.2V + Control – Control TVS +/- TVS -/+ Load Load

www.clare.com2 CPC1317 R03 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings Parameter Ratings Units SSR Output Blocking Voltage 70 V P TVS Working Voltage, Maximum 40.2 V Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA Input Power Dissipation 1 150 mW SSR Output Power Dissipation 2 400 mW TVS Peak Pulse Power (IPP=9.3A, 10/1000μs pulse) 600 W Isolation Voltage Input to Output 3750 V rms Operating T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate Linearly 1.33 mw / ºC 2 Derate Linearly 6.67 mw / ºC Electrical absolute maximum ratings are at 25°C Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Current Continuous - I L - - 150 mA Peak t=10ms I LPK - - 400 On-Resistance 1 IL=150mA, IF=1mA R ON -7 1 6 Ω Off-State Leakage Current V L=70V I LEAK --1 µ A Switching Speeds T urn-On I F=5mA, VL=10V TON - - 2.5 ms T urn-Off T OFF - - 2.5 Output Capacitance 50V; f=1MHz C OUT -2 5 - p F Input Characteristics @ 25°C Input Control Current 2 IL=150mA I F --1 m A Input Dropout Current - I F 0.1 - - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Common Characteristics @ 25°C Capacitance Input to Output - C I/O -3 - p F 1 Measurement taken within 1 second of turn-on time. 2 For applications requiring high temperature operation (> 60oC) a minimum LED drive current of 3mA is required. Parameter Conditions Symbol Min Typ Max Units Clamping Voltage I PP=9.3A V C - - 66.5 V Reverse Breakdown Voltage I=1mA V BR 44.4 - - V Reverse Leakage Current V WM=40.2V I L --5 μA

www.clare.com 3R03 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Voltage Drop (V) Device Count (N) CPC1317 Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) LED Current (mA) Device Count (N) CPC1317 Typical IF for Switch Operation (TA=25ºC, IL=100mA) 75 85 95 10580 90 100 Turn-On (μs) Device Count (N) CPC1317 Typical Turn-On Time (TA=25ºC, IL=100mA, IF=5mA) Turn-Off (ms) Device Count (N) CPC1317 Typical Turn-Off Time (TA=25ºC, IL=100mA, IF=5mA) On-Resistance (Ω) Device Count (N) o CPC1317 Typical On-Resistance Distribution (TA=25ºC, IL=100mA) 84 86 88 9085 87 89 Blocking Voltage (V Device Count (N) CPC1317 Typical Blocking Voltage Distribution (TA=25ºC) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Voltage (V) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 CPC1317 LED Forward Voltage vs. Temperature IF=50mA IF=10mA IF=20mA IF=5mA IF=2mA IF=1mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-On Time (μs) 100 200 300 400 500 600 CPC1317 Turn-On Time vs. Temperature IF=1mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-Off Time (μs) 200 300 400 500 600 700 800 CPC1317 Turn-Off Time vs. Temperature IF=5mA IF=1mA LED Forward Current (mA) 0 5 10 15 20 Turn-On Time (μs) 200 400 600 800 1000 1200 CPC1317 Typical Turn-On Time vs. LED Forward Current LED Forward Current (mA) 0 5 10 15 20 Turn-Off Time (μs) 460 465 470 475 480 485 CPC1317 Typical Turn-Off Time vs. LED Forward Current Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Current (mA) 0.15 0.20 0.25 0.30 0.35 CPC1317 LED Current to Operate vs. Temperature (IL=100mA)

www.clare.com4 CPC1317 R03 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. Temperature (ºC) -40 -20 0 20 40 60 80 100 On-Resistance (Ω) CPC1317 On-Resistance vs. Temperature (IL=50mA, IF=1mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 TVS Breakdown Voltage (V) CPC1317 TVS Diode Breakdown Voltage vs. Temperature (Pins 7 & 8) Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) CPC1317 TVS Diode Leakage vs. Temperature (Pins 7 & 8) (VL=40V) Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (μA) CPC1317 Leakage Current vs. Temperature Measured Between Pins 5 & 6 (VL=70V) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) CPC1317 Blocking Voltage vs. Temperature (Pins 5 & 6) Temperature (ºC) -40 -20 0 20 40 60 80 100 Load Current (mA) 120 125 130 135 140 145 150 155 CPC1317 Load Current vs. Temperature (IF=1mA) Load Voltage (V) Load Current (A) -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 CPC1317 Typical Load Current vs. Load Voltage (TA=25ºC, IF=1mA) Time 10μs 100 μs 1ms 10ms 100ms 1s 10s 100s Load Current (mA) 200 400 600 800 1000 CPC1317 Energy Rating Curve Temperature (ºC) -40 -20 0 20 40 60 80 100 Peak Pulse Power (% PPP @ 25ºC) 100 120 CPC1317 TVS Derating Curve Time (μs) PPP - Peak Pulse Current (% IPP) 100 110 CPC1317 TVS Pulse Waveform 10/1000 (μs) 10 100 1000 104 105 106

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1317-R03 ©Copyright 2009, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 3/9/09 For additional information please visit our website at: www.clare.com MECHANICAL DIMENSIONS RoHS 2002/95/EC e3Pb MANUFACTURING INFORMATION

8 Pin Flatpack Package

9.398 ± 0.127 (0.370 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 2.540 ± 0.127 (0.100 ± 0.005) 8.077 ± 0.127 (0.318 ± 0.005) 7.620 ± 0.254 (0.300 ± 0.010) 2.159 TYP . (0.085 TYP .) 2.286 MAX. (0.090 MAX.) 0.203 (0.008) 0.635 ± 0.127 (0.025 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 0.457 ± 0.076 (0.018 ± 0.003) 2.159 TYP . (0.085 TYP .) Recommended PCB Land Pattern Dimensions mm (inches) 2.54 (0.10) 8.70 (0.3425)1.55 (0.0610) 0.65 (0.0255) Tape and Reel Packaging for 8 Pin Flatpack Package User Direction of Feed Embossment Embossed Carrier Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 330.2 DIA. (13.00 DIA.) P = 12.00 (0.472) W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Ao = 10.30 (0.406) K1 = 2.00 (0.079) Top Cover Tape K0 = 2.70 (0.106) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Dimensions mm (inches) Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents.