CPC1303 CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Description

Ordering Information

 Sensor Circuitry  Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Meters (Watt-Hour, Water, Gas)  Medical Equipment: Patient/Equipment Isolation  Aerospace  Industrial Controls  Small 4-pin Package  Low Drive Power Requirements (TTL/CMOS Compatible)  No Moving Parts  High Reliability  Arc-Free With No Snubbing Circuits  5000Vrms Input/Output Isolation  No EMI/RFI Generation  Machine Insertable, Wave Solderable The CPC1303 is a unidirectional input optocoupler with a single-transistor output, which uses optically coupled technology to provide an enhanced 5000V rms isolation barrier between the input and the output. The optically coupled output is controlled by a highly efficient GaAlAs infrared LED. This optocoupler satisfies the PD output requirements of the CPC1466. Approvals  UL Pending  EN/IEC 60950-1 Compliant  CSA Certified Component: Certificate # 043639 A K C E

www.clare.com2 CPC1303 R02 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings

Electrical Characteristics

Parameters Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Phototransistor Breakdown Voltage I CEO=10µA BV CEO 30 - - V P Phototransistor Output (Dark) Current V CEO=5V , IF=0mA I CEO - 25 500 nA Saturation Voltage I C=0.4mA, IF=0.2mA VCEsat - 0.1 0.45 V IC=10mA, IF=10mA - 0.12 0.5 V Current T ransfer Ratio I F=0.2mA, VCE=0.5V CTR 200 1000 2500 % Output Capacitance V CEO=25V , f=1MHz C OUT -6 - p F Input Characteristics @ 25°C Input Control Current I C=0.4mA, VCE=0.5V I F - - 0.2 mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Input Reverse Current V R=5V I R - - 10 µA Common Characteristics @ 25°C Input to Output Capacitance - C I/O -3 - p F Parameter Ratings Units Breakdown Voltage 30 V P Reverse Input Voltage 5 V Input Control Current 50 mA Peak (10ms) 1 A Power Dissipation Input 1 150 mW Phototransistor 2 150 Isolation Voltage, Input to Output 5000 V rms Operating T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate Linearly 1.33 mW/ oC 2 Derate Linearly 2.00 mW/ oC Electrical absolute maximum ratings are at 25°C Characteristic Symbol Test Condition Typ Units T urn-On Time t ON VCC=5V , IF=1mA, RL=500Ω 2 μsT urn-Off Time t OFF 8 Switching Characteristics @ 25ºC Switching Time Test Circuit VCC VCE RL IF Pulse Width=5ms Duty Cycle=1% IF 10% 90% t ON t OFF VCE

www.clare.com 3R02 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Voltage (V) LED Forward Current (mA)0 CPC1303 LED Voltage vs. LED Current (Linear) LED Forward Voltage (V) LED Forward Current (mA) 0.1 100 CPC1303 LED Voltage vs. LED Current (LOG) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Voltage (V) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 CPC1303 LED Forward Voltage vs. Temperature IF=50mA IF=5mA IF=10mA IF=20mA IF=0.2mA IF=1mA IF=2mA LED Forward Current (μA) 1 10 100 1000 CTR (%) 200 400 600 800 1000 1200 CPC1303 LED Forward Current vs. CTR -40ºC 85ºC 25ºC Collector Voltage (V) 012345 Collector Current (mA) CPC1303 Typical Collector Voltage vs. Typical Collector Current (TA=25ºC) IF=5mA IF=3mA IF=2mA IF=1mA I F=0.5mA I F=0.2mA Temperature (ºC) -40 0 40 80 120 ICE Current (μA) 100 1000 10000 100000 CPC1303 ICE Current vs. Temperature IF=1000μA IF=1μA IF=2μA IF=5μA IF=10μA IF=20μA IF=50μA IF=100μA IF=200μA IF=500μA Temperature (ºC) -40 -20 0 20 40 60 80 100 Saturation Voltage (V) 0.06 0.08 0.10 0.12 0.14 0.16 CPC1303 Saturation Voltage vs. Temperature (IF=1mA, ICE=2mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) CPC1303 Typical Blocking Voltage vs. Temperature Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) 100 200 300 400 500 CPC1303 Leakage Current vs. Temperature VCE Leakage 10V VCE Leakage 3V VCE Leakage 5V Load Resistance (Ω) 0 20000 40000 60000 80000 100000 Turn-On Time (μs) 0.9 1.0 1.1 1.2 1.3 1.4 1.5 CPC1303 Turn-On Time vs. Load Resistance (TA=25ºC, VCC=5V, IF=1mA) Load Resistance (Ω) 0 20000 40000 60000 80000 100000 Turn-Off Time (μs) 100 150 200 250 300 350 CPC1303 Turn-Off Time vs. Load Resistance (TA=25ºC, VCC=5V, IF=1mA)

www.clare.com4 CPC1303 R02 MECHANICAL DIMENSIONS RoHS 2002/95/EC e3Pb Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 4-Pin DIP (”G” Suffix) PC Board Pattern (Top View) Dimensions mm (inches) PIN 1 6.350 ± 0.127 (0.250 ± 0.005) 4.572 ± 0.127 (0.180 ± 0.005) 0.991 (0.039) 9º (ALL) 3.30 ± 0.050 (0.130 ± 0.002) 0.254 (0.010) 9.144 ± 0.508 (0.360 ± 0.020) 7.620 ± 0.254 (0.300 ± 0.010) 7.620 ± 0.127 (0.300 ± 0.005) 2.540 ± 0.127 (0.100 ± 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 6.350 ± 0.127 (0.250 ± 0.005) 9º (ALL) 0.457 ± 0.076 (0.018 ± 0.003) 2.540 ± 0.127 (0.125) 0.508 (0.020) 1.651 (0.065) PIN #1 6.350 ± 0.127 (0.250 ± 0.005) 0.991 (0.039) 9.525 (0.375) 2.540 ± 0.127 (0.100 ± 0.005) 4-Pin Surface Mount (”GR” Suffix) 7.620 ± 0.254 (0.300 ± 0.010) 0.635 ± 0.254 (0.025 ± 0.010) 0.254 (0.010) 3.300 ± 0.050 (0.130 ± 0.002) 3.480 ± 0.076 (0.137 ± 0.003) Recommended PCB Land Pattern Dimensions mm (inches) 2.287 (0.09) 8.80 (0.346) 1.60 (0.063) 0.95 (0.037) 9º ± 1º (ALL) 0.102 min / 0.254 max (0.004 min / 0.010 max) 4.572 ± 0.127 (0.180 ± 0.005) 2.540 ± 0.127 (0.100 ± 0.005) 2.287 ± 0.127 (0.090 ± 0.005)

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1303-R02 ©Copyright 2008, Clare, Inc. All rights reserved. Printed in USA. 4/2/08 For additional information please visit our website at: www.clare.com CPC1303 NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 4-Pin Surface Mount Package Dimensions mm (inches) Embossment Embossed Carrier

330.2 Dia

(13.00 Dia) Top Cover Tape Thickness

0.102 Max

(0.004 Max) K0 = 4.20 (0.165) K1 = 3.70 (0.146) W = 16.00 (0.630) A0 = 10.01 (0.394) P = 12.00 (0.472) B0 = 5.00 (0.197)