CPC1218 CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Description

Ordering Information

 Security  Passive Infrared Detectors (PIR)  Data Signalling  Sensor Circuitry  Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Energy Meters  Medical Equipment—Patient/Equipment Isolation  Aerospace  Industrial Controls  100% Solid State  Voltage-controlled operation  Matches popular reed relay pin-out  Designed for use in security systems complying with EN50130-4  Small 4-Pin SIP Package  TTL/CMOS Compatible input  Arc-Free With No Snubbing Circuits  2500V rms Input/Output Isolation  No EMI/RFI Generation  Immune to radiated EM fields  Auto Pick & Place, Wave Solderable The CPC1218 is a miniature voltage-controlled 1-Form-A Solid State Relay in a 4-pin Single In-line Package (SIP) that employs optically coupled MOSFET technology to provide 2500V rms of input to output isolation. The super efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS ® architecture. The optically-coupled output is controlled by the input's highly efficient GaAlAs infrared LED and a built-in series resistor to provide input voltage-controlled operation. The CPC1218 features a pin-out that matches many popular reed relays and is thus a "drop-in" solid state replacement. Because the input is solid state there is no need for snubbers or "catch" diodes to suppress the inductive fly back transient voltage normally associated with EMR coils. 1234 CPC1218 Pinout Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD 10% 90% TON TOFF Approvals  UL Recognized Component: File # E76270  EN/IEC 60950 Compliant  CSA Certified Component: Certificate # 1172007

www.clare.com2 CPC1218 R04 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings (@ 25˚ C) Parameter Ratings Units Blocking Voltage 60 V P Reverse Input Voltage 5 V Input Control Voltage 15 V Input Power Dissipation 225 mW T otal Power Dissipation 1 800 mW Isolation Voltage, Input to Output 2500 V rms Operational T emperature -40 to +85 ºC Storage T emperature -40 to +125 ºC 1 Derate Linearly 6.67 mw / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Current, Continuous 1 VIN=5V I L - - 600 mA Peak Load Current t =10ms I LPK --1 A On-Resistance 2 IL=600mA R ON - - 1.1 Ω Off-State Leakage Current V L=60V I LEAK --1 μA Switching Speeds T urn-On V IN=5V , VL=10V T ON --5 m s T urn-Off V IN=5V , VL=10V T OFF --5 m s Output Capacitance 50V; f=1MHz C OUT -2 5 - p F Input Characteristics @ 25°C Input Control Voltage (must operate) I L=600mA V OP - - 3.75 V Off Voltage (must be off) - V OFF 1- - V Reverse Input Current V R=5V I R -- 1 0 μA Input Resistor - - 900 1000 1100 Ω Common Characteristics @ 25°C Capacitance Input to Output - - - 1 - pF 1 Load current derates linearly from 600mA @ 25oC to 480mA @80oC. 2 Measurement taken within 1 second of on time.

Electrical Characteristics

www.clare.com 3R04 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. Device Count (N) CPC1218 Typical On-Resistance Distribution (TA=25ºC, IL=100mA, VIN=5V) On-Resistance (Ω) Device Count (N) Blocking Voltage (VP) CPC1218 Typical Blocking Voltage Distribution (TA=25ºC) Input Voltage (V) Device Count (N) CPC1218 Typical Input Voltage for Switch Operation (TA=25ºC, IL=100mA) Input Voltage (V) Device Count (N) CPC1218 Typical VOFF for Switch Dropout (TA=25ºC, IL=100mA) Turn-On (ms) Device Count (N) CPC1218 Typical Turn-On Time (TA=25ºC, IL=100mA, VIN=5V) Turn-Off (ms) Device Count (N) CPC1218 Typical Turn-Off Time (TA=25ºC, IL=100mA, VIN=5V) Load Current (A) 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 Temperature (ºC) -40 -20 0 20 40 60 80 120 100 VIN =5V VIN =10V CPC1218 Typical Maximum Load Current vs. Temperature Leakage (μA) -40 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -20 0 20 40 60 80 100 Temperature (ºC) CPC1218 Typical Leakage vs. Temperature (Measured Across Pins 1 & 4) (VL=Max Rated) -40 -20 0 20 40 60 80 100 Temperature (ºC) Blocking Voltage (VP) CPC1218 Typical Blocking Voltage vs. Temperature VIN = 5V VIN = 10V Turn-On (ms) -40 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -20 0 20 40 60 80 100 Temperature (ºC) CPC1218 Typical Turn-On vs. Temperature (IL=100mA) Turn-Off (ms) -40 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -20 0 20 40 60 80 100 VIN = 5V VIN = 10V Temperature (ºC) CPC1218 Typical Turn-Off vs. Temperature (IL=100mA) Input Voltage (V) Turn-On (ms) 0 51 0 1 5 2 0 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 CPC1218 Typical Turn-On vs. Input Voltage (IL=100mA)

www.clare.com4 CPC1218 R04 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. Input Voltage (V) Turn-Off (ms) 0 2 4 6 8 10 12 14 16 18 0.7 0.6 0.5 0.4 0.3 0.2 0.1 CPC1218 Typical Turn-Off vs. Input Voltage (IL=100mA) -40 1.0 0.8 0.7 0.6 0.5 0.4 0.3 -20 0 20 40 60 80 100 Steady State VIN = 10V VIN = 5V Temperature (ºC) On-Resistance (Ω) 0.9 CPC1218 Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature) Input Voltage (V) -40 -20 0 20 40 60 80 100 1.45 1.40 1.35 1.30 1.25 1.20 1.15 Temperature (ºC) CPC1218 Typical Input Voltage for Switch Operation vs. Temperature (IL=100mA) Input Voltage (V) -40 1.45 1.40 1.35 1.30 1.25 1.20 1.15 -20 0 20 40 60 80 100 Temperature (ºC) CPC1218 Typical Input Voltage for Switch Dropout vs. Temperature (IL=100mA) Load Voltage (V) Load Current (mA) 600 400 200 -200 -400 -600 CPC1218 Typical Load Current vs. Load Voltage (TA=25ºC, VIN=5V) Time Load Current (A) 10μs 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 1ms100μs 100ms 1s10ms 10s 100s CPC1218 Energy Rating Curve

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1218-R04 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/16/08 For additional information please visit our website at: www.clare.com 4-Pin SIP 19.202 ± 0.381 (0.756 ± 0.015) 6.401 ± 0.127 (0.252 ± 0.005) 5.944 ± 0.127 TYP 2.642 ± 0.127 TYP 0.254 ± 0.013 (0.010 ± 0.0005) 0.457 ± 0.076 TYP 5.080 ± 0127 (0.200 ± 0.005) 5.080 ± 0127 (0.200 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 3.251 ± 0.102 (0.128 ± 0.004) NOTES: 1. Leadframe thickness does not include plating. (1000 microinches maximum) 2. Pin location tolerances are non -accumulative. PIN 1 Dimensions: mm (inches) MECHANICAL DIMENSIONS Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. RoHS 2002/95/EC e3Pb