CPC1130N CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Description

Ordering Information

  • Telecommunications
  • Telecom Switching
  • Tip/Ring Circuits
  • Modem Switching (Laptop, Notebook, Pocket Size)
  • Hookswitch
  • Dial Pulsing
  • Ground Start
  • Ringing Injection
  • Instrumentation
  • Multiplexers
  • Data Acquisition
  • Electronic Switching
  • I/O Subsystems
  • Meters (Watt-Hour, Water, Gas)
  • Medical Equipment-Patient/Equipment Isolation
  • Security
  • Aerospace
  • Industrial Controls
  • Small 4-Pin SOP Package
  • Low Drive Power Requirements (TTL/CMOS Compatible)
  • No Moving Parts
  • High Reliability
  • Arc-Free With No Snubbing Circuits
  • 1500Vrms Input/Output Isolation
  • No EMI/RFI Generation
  • Machine Insertable, Wave Solderable
  • Tape & Reel Version Available The CPC1130N is a miniature 1-Form-B solid state relay which uses optically coupled MOSFET technol- ogy to provide 1500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS ® architecture. The optically-coupled input is controlled by a highly effi- cient GaAIAs infrared LED. The CPC1130N offers board space savings of at least 20% versus competi tive 4-Pin SOP solid state relay. Approvals
  • UL Recognized Component: File #E76270
  • Certified to EN60950 Switching Characteristics of Normally Closed (Form B) DevicesSwitching Characteristics of Normally Closed (Form B) Devices CONTROL 10ms 10% 90% 90% TONTOFF CPC1130N Pinout

www.clare.com2 CPC1130N R02 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings (@ 25˚C) Parameter Ratings Units Blocking Voltage 350 V Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA 1 A Input Power Dissipation 150 mW Total Power Dissipation 1 400 mW Capacitance Input to Output 1 pF Isolation Voltage Input to Output 1500 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 Derate Linearly 3.33 mw / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Current AC Peak 1, Continuous - IL - - 120 mA Peak Load Current 10ms ILPK - - 350 mA On-Resistance 2 IL=120mA RON - 25 30 Ω Off-State Leakage Current VL=350V, IF=2mA ILEAK - - 5 µA Switching Speeds Turn-On IF=5mA, VL=10V TON - - 2 ms Turn-Off IF=5mA, VL=10V TOFF - - 2 ms Output Capacitance 50V; f=1MHz COUT - 25 - pF Input Characteristics @ 25°C Input Control Current 3 IL=120mA IF 2 - 50 mA Input Dropout Current - IF 0.3 0.9 - mA Input Voltage Drop IF=5mA VF 0.9 1.2 1.4 V Reverse Input Current VR=5V IR - - 10 µA 1 Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC. 2 Measurement taken within 1 second of on time. 3 For applications requiring high temperature operation (greater than 60°C) an LED drive current of 5mA is recomended.

Electrical Characteristics

www.clare.com 3R02 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. CPC1130N Typical LED Forward Voltage Drop (Ambient Temperature = 25 C) IF = 5mADC LED Forward Voltage Drop (V) Device Count (N) CPC1130N Typical On-Resistance Distribution (Ambient Temperature = 25 C) (Load Current = 120mA) On-Resistance (Ω) Device Count (N) CPC1130N Typical Blocking Voltage Distribution (Ambient Temperature = 25 C) Blocking Voltage (V) Device Count (N) CPC1130N Typical IF for Switch Operation (Ambient Temperature = 25 C) (Load Current = 120mA) LED Current (mA) Device Count (N) CPC1130N Typical IF for Switch Dropout (Ambient Temperature = 25 C) (Load Current = 120mA) LED Current (mA) Device Count (N) CPC1130N Typical Turn-On Time (Ambient Temperature = 25 C) (Load Current = 120mA; IF = 5mA) Turn-On (ms) Device Count (N) CPC1130N Typical Turn-Off Time (Ambient Temperature = 25 C) (Load Current = 120mA; IF = 5mA) Turn-Off (ms) Device Count (N) CPC1130N Typical Load Current vs. Temperature (IF=0, IL=AC Peak) Temperature ( C) Load Current (mA) CPC1130N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated Temperature ( C) Leakage (µA) CPC1130N Typical Blocking Voltage vs. Temperature Temperature ( C) Blocking Voltage (VRMS) CPC1130N Typical Turn-On vs. Temperature (Load Current = 50mA) Temperature ( C) Turn-Off (ms) 5mA 10mA CPC1130N Typical Turn-Off vs. Temperature (Load Current = 50mA) Temperature ( C) 5mA 10mA Turn-On (ms)

www.clare.com4 CPC1130N R02 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. CPC1130N Typical LED Forward Voltage Drop vs. Temperature Temperature ( C) LED Forward Voltage Drop (V) 50mA 30mA 20mA 10mA 5mA CPC1130N Typical Turn-On vs. LED Forward Current (Load Current = 120mA) LED Forward Current (mA) (ms) CPC1130N Typical Turn-Off vs. LED Forward Current (Load Current = 120mA) LED Forward Current (mA) (ms) CPC1130N Typical On-Resistance vs. Temperature (Load Current = max rated; IF = 5mA) Temperature ( C) On-Resistance (Ω) CPC1130N Typical Load Current vs. Load Voltage (Ambient Temperature = 25 C) IF = 5mA Load Voltage (V) Load Current (mA) CPC1130N Energy Rating Curve Time Load Current (A) CPC1130N Typical IF for Switch Operation vs. Temperature (Load Current = 50mA) Temperature ( C) LED Current (mA)

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1130N-R02 ©Copyright 2005, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/1/05 For additional information please visit our website at: www.clare.com MECHANICAL DIMENSIONS 2.54 TYP. (0.100 TYP.) 2.18 MAX. (0.086) 0.38 TYP. (0.015 TYP.) PC Board Pattern (Top View) 4-Pin SOIC Narrow ("N" Suffix) Dimensions: mm (inches) B0 = 4.70 (0.185) A A P = 8.00 (0.315) W = 12.00 MAX (0.472 MAX) K1 = 2.30 (0.091) SECTION A-A Tape and Reel Packaging for 4 pin SOIC package

330.2 DiA

(13.00" DiA) Top Cover Tape Thickness

0.102 MAX

(0.004 MAX) K0 = 2.7 (0.106) Embossment Embossed Carrier A0 = 6.50 (0.256) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Manufacturing Information Soldering Recommended soldering processes are limited to 260 ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. RoHS 2002/95/EC