CPC1117N CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Description

Ordering Information

  • Security
  • Passive Infrared Detectors (PIR)
  • Data Signalling
  • Sensor Circuitry
  • Instrumentation
  • Multiplexers
  • Data Acquisition
  • Electronic Switching
  • I/O Subsystems
  • Meters (Watt-Hour, Water, Gas)
  • Medical Equipment—Patient/Equipment Isolation
  • Aerospace
  • Industrial Controls
  • Designed for use in security systems complying with EN50130-4
  • Only 1mA of LED current required to operate
  • Small 4-Pin SOP Package
  • TTL/CMOS Compatible input
  • No Moving Parts
  • High Reliability
  • Arc-Free With No Snubbing Circuits
  • 1500V rms Input/Output Isolation
  • No EMI/RFI Generation
  • Immune to radiated EM fields
  • SMD Pick & Place, Wave Solderable
  • Tape & Reel Version Available The CPC1117N is a miniature 1-Form-B solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500V rms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS ® architecture. The optically coupled output is controlled by the input's highly efficient GaAlAs infrared LED using Clare’s state of the art double molded vertical construction packaging to produce the world’s smallest relay. The CPC1117N offers board space savings of at least 20% over the competitor’s larger 4-Pin SOP relay. It boasts the industries' lowest input current to operate in its class. Approvals
  • UL Recognized Component
  • Certified to EN60950 2 3 + Control – Control Load Load Switching Characteristics of Normally Closed (Form B) DevicesSwitching Characteristics of Normally Closed (Form B) Devices CONTROL 10ms 10% 90% 90% TONTOFF

www.clare.com2 CPC1117N R0B PRELIMINARY Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings Parameter Ratings Units Blocking Voltage 60 VP Reverse Input Voltage 5 V Input control Current 50 mA Peak (10ms) 1 A Input Power Disipation 70 mW Total Power Dissipation 1 400 mW Isolation voltage Input to Output 1500 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 Derate Linearly 3.33 mw / ºC Electrical absolute maximum ratings are at 25°C Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Current (Continuous) 1 IF=0mA IL - - 150 mA Peak Load Current 10ms ILPK - - 350 mA On-Resistance 2 IL=120mA RON - - 16 Ω Off-State Leakage Current VL=60V, IF=2mA ILEAK - - 1 µA Switching Speeds Turn-On IF=2mA, VL=10V TON - - 1 ms Turn-Off IF=2mA, VL=10V TOFF - - 2 ms Output Capacitance 50V; f=1MHz COUT - 25 - pF Input Characteristics @ 25°C Input Control Current3 IL=120mA IF 1 - - mA Input Dropout Current - IF 0.3 0.9 - mA Input Voltage Drop IF=5mA VF 0.9 1.2 1.4 V Reverse Input Current VR=5V IR - - 10 µA Common Characteristics @ 25°C Capacitance Input to Output - - - 1 - pF 1 Load current derates linearly from 100mA @ 25oC to 70mA @85oC. 2 Measurement taken within 1 second of on time. 3 For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recommended.

Electrical Characteristics

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1117N-R0B ©Copyright 2006, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 1/4/06 For additional information please visit our website at: www.clare.com PRELIMINARY Mechanical Dimensions 2.54 TYP. (0.100 TYP.) 2.18 MAX. (0.086) 0.38 TYP. (0.015 TYP.) 6.096 ± 0.102 (0.150 ± 0.003) 4.09 ± 0.20 (0.161 ± 0.008) 0.38 x 45° (0.015 x 45°) 1.020 ± 0.025 (0.040 ± 0.001) 0.432 ± 0.127 (0.008 ± 0.001) PC Board Pattern (Top View) 2.54 ± 0.127 (0.100 ± 0.005) 5.66 ± 0.14 (0.057) 0.889 (0.035) 4-Pin SOIC Narrow ("N" Suffix) Dimensions: mm (inches) B0 = 4.70 (0.185) A A P = 8.00 (0.315) W = 12.00 MAX (0.472 MAX) K1 = 2.30 (0.091) SECTION A-A Tape and Reel Packaging for 4-pin SOP package

330.2 DiA

(13.00" DiA) Top Cover Tape Thickness

0.102 MAX

(0.004 MAX) K0 = 2.7 (0.106) Embossment Embossed Carrier A0 = 6.50 (0.256) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Manufacturing Information Soldering Recommended soldering processes are limited to 260 ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. RoHS 2002/95/EC