CPC1030N CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Description

4 Pin SOP OptoMOS® Relay

Ordering Information

Part # Description CPC1030N 4 Pin SOP (100/tube) CPC1030NTR 4 Pin SOP (2,000/reel) CPC1030N Units Load Voltage 350 V Load Current 120 mA Max R ON 30 Ω Pin Configuration Switching Characteristics of Normally Open (Form A) Devices CPC1030N Pinout /K31 /K32 /K33 /K34 /K2B /K43/K6F/K6E/K74/K72/K6F/K6C /KD0 /K43/K6F/K6E/K74/K72/K6F/K6C /K4C/K6F/K61/K64 /K4C/K6F/K61/K64 /K43/K4F/K4E/K54/K52/K4F/K4C /K4C/K4F/K41/K44 /K31/K30/K6D/K73 /K31/K30/K25 /K31/K30/K25 /K39/K30/K25 /K2B /K54 /K4F/K4E /K54 /K4F/K46/K46 /K2B /K2B

www.clare.com CPC1030N Rev. 5

Electrical Characteristics

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the opera- tional sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Absolute Maximum Ratings (@ 25˚ C) Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Voltage (Peak) - V L - - 350 V Load Current (Continuous) AC Peak 1 I L - - 120 mA Peak Load Current 10ms I LPK - - 350 mA On-Resistance 2 I L=120mA R ON -2 53 0 Ω Off-State Leakage Current V L=350V I LEAK -- 1µ A Switching Speeds Turn-On I F=5mA, VL=10V T ON -- 2m s Turn-Off I F=5mA, VL=10V T OFF - 1.0 ms Output Capacitance 50V; f=1MHz C OUT -2 5 - p F Input Characteristics @ 25°C Input Control Current 3 I L=120mA I F 2-5 0 m A Input Dropout Current - I F 0.3 0.9 - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Voltage - V R -- 5 V Reverse Input Current V R=5V I R - - 10 µA 1 Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC. 2 Measurement taken within 1 second of on time. 3 For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recommended. Parameter Min Typ Max Units Input Power Dissipation - - 150 1 mW Input Control Current - - 50 mA Peak (10ms) - - 1 A Reverse Input Voltage - - 5 V Total Power Dissipation - - 400 2 mW Capacitance Input to Output - 1 - pF Isolation Voltage Input to Output 1500 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mw / oC 2 Derate Linearly 6.67 mw / oC

www.clare.comRev. 5 PERFORMANCE DATA* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. CPC1030N Typical LED Forward Voltage Drop (Ambient Temperature = 25 C) IF = 5mADC /K33/K35 /K33/K30 /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K31/K2E/K31/K37 /K31/K2E/K31/K39 /K31/K2E/K32/K31 /K31/K2E/K32/K33 /K31/K2E/K32/K35 LED Forward Voltage Drop (V) Device Count (N) /K6F CPC1030N Typical On-Resistance Distribution (Ambient Temperature = 25 C) (Load Current = 120mA) /K33/K35 /K33/K30 /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K32/K33/K2E/K35 /K32/K34/K2E/K35 /K32/K35/K2E/K35 /K32/K36/K2E/K35 /K32/K34 /K32/K35 /K32/K36 On-Resistance (Ω ) Device Count (N) /K6F CPC1030N Typical Blocking Voltage Distribution (Ambient Temperature = 25 C) /K33/K35 /K33/K30 /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K33/K37/K30 /K33/K38/K30 /K33/K39/K30 /K34/K30/K30 /K33/K37/K35 /K33/K38/K35 /K33/K39/K35 Blocking Voltage (V) Device Count (N) /K6F CPC1030N Typical IF for Switch Operation (Ambient Temperature = 25 C) (Load Current = 120mA) /K30/K2E/K35/K30 /K30/K2E/K36/K30 /K30/K2E/K37/K30/K30/K2E/K34/K35 /K30/K2E/K35/K35 /K30/K2E/K36/K35 /K30/K2E/K37/K35 LED Current (mA) Device Count (N) /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K6F CPC1030N Typical IF for Switch Dropout (Ambient Temperature = 25 C) (Load Current = 120mA) /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K30/K2E/K35/K30 /K30/K2E/K36/K30 /K30/K2E/K37/K30/K30/K2E/K34/K35 /K30/K2E/K35/K35 /K30/K2E/K36/K35 /K30/K2E/K37/K35 LED Current (mA) Device Count (N) /K6F CPC1030N Typical Turn-On Time (Ambient Temperature = 25 C) (Load Current = 120mA; IF = 5mA) /K30/K2E/K35/K30 /K30/K2E/K37/K30 /K30/K2E/K39/K30 /K31/K2E/K31/K30 /K30/K2E/K36/K30 /K30/K2E/K38/K30 /K31/K2E/K30/K30 Turn-On (ms) Device Count (N) /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K6F CPC1030N Typical Turn-Off Time (Ambient Temperature = 25 C) (Load Current = 120mA; IF = 5mA) /K30/K2E/K32/K31 /K30/K2E/K32/K33 /K30/K2E/K32/K35 /K30/K2E/K32/K37 /K30/K2E/K32/K36/K30/K2E/K32/K34/K30/K2E/K32/K32 Turn-Off (ms) Device Count (N) /K32/K35 /K32/K30 /K31/K35 /K31/K30 /K35 /K30 /K6F CPC1030N Typical Load Current vs. Temperature Temperature ( C) Load Current (mA) /K31/K38/K30/K3 /K31/K36/K30/K3 /K31/K34/K30/K3 /K31/K32/K30/K3 /K31/K30/K30/K3 /K38/K30/K3 /K36/K30/K3 /K34/K30/K3 /K32/K30/K3 /K30 /K2D/K34/K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K32/K30 /K31/K30/K30 I =5mAF I =10mAF /K6F CPC1030N Typical Blocking Voltage vs. Temperature Temperature ( C) Blocking Voltage (VRMS ) /K2D/K34/K30 /K34/K30/K30/K3 /K33/K39/K35/K3 /K33/K39/K30/K3 /K33/K38/K35/K3 /K33/K38/K30/K3 /K33/K37/K35/K3 /K33/K37/K30/K3 /K33/K36/K35 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 /K6F CPC1030N Typical Turn-On vs. Temperature (Load Current = 80mA) Temperature ( C) 5mA 10mA Turn-On (ms) /K2D/K34/K30 /K35/K2E/K30/K30/K30/K3 /K34/K2E/K35/K30/K30/K3 /K34/K2E/K30/K30/K30/K3 /K33/K2E/K35/K30/K30/K3 /K33/K2E/K30/K30/K30/K3 /K32/K2E/K35/K30/K30/K3 /K32/K2E/K30/K30/K30/K3 /K31/K2E/K35/K30/K30/K3 /K31/K2E/K30/K30/K30/K3 /K30/K2E/K35/K30/K30/K3 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 /K6F CPC1030N Typical Turn-Off vs. Temperature (Load Current = 80mA) Temperature ( C) Turn-Off (ms) /K2D/K34/K30 /K31/K2E/K30/K30/K30/K3 /K30/K2E/K39/K30/K30/K3 /K30/K2E/K38/K30/K30/K3 /K30/K2E/K37/K30/K30/K3 /K30/K2E/K36/K30/K30/K3 /K30/K2E/K35/K30/K30/K3 /K30/K2E/K34/K30/K30/K3 /K30/K2E/K33/K30/K30/K3 /K30/K2E/K32/K30/K30/K3 /K30/K2E/K31/K30/K30/K3 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 5mA /K6F 10mA CPC1030N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated Temperature ( C) Leakage (µA) /K2D/K34/K30 /K30/K2E/K30/K31/K36 /K30/K2E/K30/K31/K34 /K30/K2E/K30/K31/K32 /K30/K2E/K30/K31/K30 /K30/K2E/K30/K30/K38 /K30/K2E/K30/K30/K36 /K30/K2E/K30/K30/K34 /K30/K2E/K30/K30/K32 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 /K6F

www.clare.com4 CPC1030N Rev. 5 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. CPC1030N Typical LED Forward Voltage Drop vs. Temperature Temperature ( C) LED Forward Voltage Drop (V) /K31/K2E/K38 /K31/K2E/K36 /K31/K2E/K34 /K31/K2E/K32 /K31/K2E/K30 /K30/K2E/K38 /K2D/K34/K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K32/K30 /K31/K30/K30 50m A 30m A 20m A 10m A 5m A /K6F CPC1030N Typical Turn-On vs. LED Forward Current (Load Current = 120mA) LED Forward Current (mA) Turn-On (ms) /K30 /K35 /K31 /K30/K31 /K35/K32 /K30/K32 /K35/K33 /K30/K33 /K35/K34 /K30/K34 /K35 /K32/K2E/K30/K3 /K31/K2E/K38/K3 /K31/K2E/K36/K3 /K31/K2E/K34/K3 /K31/K2E/K32/K3 /K31/K2E/K30/K3 /K30/K2E/K38/K3 /K30/K2E/K36/K3 /K30/K2E/K34/K3 /K30/K2E/K32/K3 /K30 /K35/K30 CPC1030N Typical Turn-Off vs. LED Forward Current (Load Current = 120mA) LED Forward Current (mA) /K30 /K35 /K31 /K30/K31 /K35/K32 /K30/K32 /K35/K33 /K30/K33 /K35/K34 /K30/K34 /K35 /K30/K2E/K37/K3 /K30/K2E/K36/K3 /K30/K2E/K35/K3 /K30/K2E/K34/K3 /K30/K2E/K33/K3 /K30/K2E/K32/K3 /K30/K2E/K31/K3 /K30 /K35/K30 CPC1030N Typical On-Resistance vs. Temperature (Load Current = 80mA; IF = 10mA) Temperature ( C) On-Resistance ( ) /K2D/K34/K30 /K36/K30 /K35/K30 /K34/K30 /K33/K30 /K32/K30 /K31/K30 /K30 /K2D/K32/K30 /K30 /K32/K30 /K34/K30 /K36/K30 /K38/K30 /K31/K30/K30 /K6F CPC1030N Typical IF for Switch Operation vs. Temperature (Load Current = 80mA) Temperature ( C) LED Current (mA) -40 3.000 2.500 2.000 1.500 1.000 0.500 -20 0 20 40 60 80 100 o CPC1030N Typical IF for Switch Dropout vs. Temperature (Load Current = 80mA) Temperature ( C) LED Current (mA) -40 3.000 2.500 2.000 1.500 1.000 0.500 -20 0 20 40 60 80 100 o Load Voltage (V) Load Current (mA) /K31/K35/K30/K3 /K31/K30/K30/K3 /K35/K30/K3 /K30/K3 /K2D/K35/K30/K3 /K2D/K31/K30/K30/K3 /K2D/K31/K35/K30 /K2D/K33 /K2D/K32 /K2D/K31 /K30 /K31 /K32 /K33 CPC1030N Typical Load Current vs. Load Voltage (Ambient Temperature = 25 C) IF = 5mA /K6F CPC1030N Energy Rating Curve Time Load Current (A) /K31/K30/KB5/K73 /K31/K2E/K30/K3 /K30/K2E/K39/K3 /K30/K2E/K38/K3 /K30/K2E/K37/K3 /K30/K2E/K36/K3 /K30/K2E/K35/K3 /K30/K2E/K34/K3 /K30/K2E/K33/K3 /K30/K2E/K32/K3 /K30/K2E/K31/K3 /K30 /K31/K6D/K73/K31/K30/K30/KB5/K73 /K31/K30/K30/K6D/K73 /K31/K73/K31/K30/K6D/K73 /K31/K30/K73 /K31/K30/K30/K73

www.clare.com 5Rev. 5 Dimensions mm (inches) Mechanical Dimensions PC Board Pattern (Top View) 2.54 ± 0.127 (0.100 ± 0.005) 5.66 ± 0.14 (0.057) 0.889 (0.035) /K2E/K32/K30 /KB1 /K2E/K30/K32/K35 /K28/K2E/K30/K30/K38 /KB1 /K2E/K30/K30/K31/K29 /K32/K2E/K35/K34 /K54/K59/K50/K2E /K28/K2E/K31/K30/K30 /K54/K59/K50/K2E/K29 /K32/K2E/K31/K38 /K4D/K41/K58/K2E /K28/K2E/K30/K38/K36/K29 /K31/K2E/K30/K31 /KB1 /K2E/K30/K32/K35 /K28/K2E/K30/K34/K30 /KB1 /K2E/K30/K30/K31/K29 /K33/K2E/K38/K31 /KB1 /K2E/K31/K33 /K28/K2E/K31/K35/K30 /KB1 /K2E/K30/K30/K35/K29 /K36/K2E/K30/K39 /KB1 /K2E/K32/K35 /K28/K2E/K32/K34/K30 /KB1 /K2E/K30/K31/K30/K29 /K2E /K33 /K38/K78/K34 /K35 /K28/K2E/K30/K31/K35 /K78 /K34/K35 /K29 /K2E/K33/K38 /K54/K59/K50/K2E /K28/K2E/K30/K31/K35 /K54/K59/K50/K2E/K29 /K34/K2E/K30/K39 /KB1 /K30/K2E/K32/K30 /K28/K30/K2E/K31/K36/K31 /KB1 /K30/K2E/K30/K30/K38/K29

4 Pin SOIC Narrow (“N ” Suffix)

/K30/K2E/K34/K33/K32 /KB1 /K30/K2E/K31/K32/K37 /K28/K2E/K30/K31/K37 /KB1 /K2E/K30/K30/K35/K29

78 Cherry Hill Drive

Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division

145 Columbia

Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd.

3425 Harvester Road, Suite 202

Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare

1852 West 11th Street, #348

Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles

91160 Champlan

Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12

85077 Manching

Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 http://www.clare.com Worldwide Sales Offices Specification: DS-CPC1030N-R5 ©Copyright 2000, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 1/12/01 Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, with- out notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct phys- ical harm, injury or death to a person.