CPC1018N CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Description

Ordering Information

  • Security
  • Passive Infrared Detectors (PIR)
  • Data Signalling
  • Sensor Circuitry
  • Instrumentation
  • Multiplexers
  • Data Acquisition
  • Electronic Switching
  • I/O Subsystems
  • Meters (Watt-Hour, Water, Gas)
  • Medical Equipment—Patient/Equipment Isolation
  • Aerospace
  • Industrial Controls
  • Designed for use in security systems complying with EN50130-4
  • Only 1mA of LED current required to operate
  • Small 4-Pin SOP Package
  • TTL/CMOS Compatible input
  • No Moving Parts
  • High Reliability
  • Arc-Free With No Snubbing Circuits
  • 1500V rms Input/Output Isolation
  • No EMI/RFI Generation
  • Immune to radiated EM fields
  • SMD Pick & Place, Wave Solderable
  • Tape & Reel Version Available The CPC1018N is a miniature 1-Form-A solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500V rms of input to output isolation. The super efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS ® architecture. The optically coupled input is controlled by a highly efficient GaAlAs infrared LED. The CPC1018N uses Clare’s state of the art double molded vertical construction packaging to produce the world’s smallest relay. The CPC1018N offers board space savings of at least 20% over the competitor’s larger 4-Pin SOP relay. It boasts the industries' lowest input current to operate in its class. 2 3 + Control – Control Load Load CPC1018N Pinout Switching Characteristics of Normally Open (Form A) Devices CONTROL LOAD 10ms 10% 10% 90% TON TOFF Approvals
  • UL recognized file #E76270
  • Certified to EN60950

www.clare.com2 CPC1018N R03 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings (@ 25˚C) Parameter Ratings Units Blocking Voltage 60 V Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA 1 A Input Power Dissipation 70 mW Total Power Dissipation 1 400 mW Isolation Voltage Input to Output 1500 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 Derate Linearly 3.33 mw / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Load Current 1 IF=2mA, Continuous IL - - 600 mA Peak Load Current 10ms ILPK - - 1.0 Arms On-Resistance2 IL=100mA RON - - 0.8 Ω Off-State Leakage Current VL=60V ILEAK - - 1 µA Switching Speeds Turn-On IF=5mA, VL=10V TON - - 3 ms Turn-Off IF=5mA, VL=10V TOFF - - 2 ms Output Capacitance 50V; f=1MHz COUT - 25 - pF Capacitance Input to Output - - - 1 - pF Input Characteristics @ 25°C Input Control Current 3 IL=600mA IF 1.0 - - mA Input Dropout Current - IF 0.3 0.9 - mA Input Voltage Drop IF=5mA VF 0.9 1.2 1.4 V Reverse Input Current VR=5V IR - - 10 µA 1 Load current derates linearly from 600mA @ 25oC to 480mA @80oC. 2 Measurement taken within 1 second of on time. 3 For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended.

Electrical Characteristics

www.clare.com 3R03 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. CPC1018N Typical LED Forward Voltage Drop (Ambient Temperature = 25°C) IF = 5mADC LED Forward Voltage Drop (V) Device Count (N) CPC1018N Typical On-Resistance Distribution (Ambient Temperature = 25°C) (Load Current = 100mA) Device Count (N) On-Resistance (Ω) CPC1018N Typical Blocking Voltage Distribution (Ambient Temperature = 25°C) Blocking Voltage (V) Device Count (N) CPC1018N Typical IF for Switch Operation (Ambient Temperature = 25°C) (Load Current = 600mA) LED Current (mA) Device Count (N) CPC1018N Typical IF for Switch Dropout (Ambient Temperature = 25°C) (Load Current = 100mA) LED Current (mA) Device Count (N) CPC1018N Typical Turn-On Time (Ambient Temperature = 25°C) (Load Current = 100mA; IF = 5mA) Turn-On (ms) Device Count (N) CPC1018N Typical Turn-Off Time (Ambient Temperature = 25°C) (Load Current = 100mA; IF = 5mA) Turn-Off (ms) Device Count (N) CPC1018N Typical Maximum Load Current vs. Temperature Temperature (°C) Load Current (Arms) 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 -40 - 20 0 20 4 0 6 0 8 0 120100 IF =5mA IF =10mA CPC1018N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) VL = max rated Temperature (°C) Leakage (µA) -40 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -20 0 20 40 60 80 100 CPC1018N Typical Blocking Voltage vs. Temperature Temperature (°C) Blocking Voltage (V) -40 -20 0 20 40 60 80 100 CPC1018N Typical Turn-On vs. Temperature (Load Current = 80mA) Temperature (°C) IF = 5mA IF = 10mA Turn-On (ms) -40 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -20 0 20 40 60 80 100 CPC1018N Typical Turn-Off vs. Temperature (Load Current = 80mA) Temperature (°C) Turn-Off (ms) -40 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -20 0 20 40 60 80 100 IF = 5mA IF = 10mA

www.clare.com4 CPC1018N R03 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. CPC1018N Typical LED Forward Voltage Drop vs. Temperature Temperature (°C) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 - 20 0 20 4 0 6 0 8 0 120100 IF = 50mA IF = 10mA IF = 5mA CPC1018N Typical Turn-On vs. LED Forward Current (Load Current = 80mA) LED Forward Current (mA) Turn-On (ms) 0 5 1 0 15 20 25 30 35 40 45 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 CPC1018N Typical Turn-Off vs. LED Forward Current (Load Current = 80mA) LED Forward Current (mA) Turn-Off (ms) 0 5 1 0 15 20 25 30 35 40 45 0.7 0.6 0.5 0.4 0.3 0.2 0.1 CPC1018N Typical On-Resistance vs. Temperature (Load Current = max rated @ Temperature) Temperature (°C) On-Resistance (Ω) -40 0.9 0.8 0.7 0.6 0.5 0.4 0.3 -20 0 20 40 60 80 100 Steady State IF = 10mA IF = 5mA CPC1018N Typical IF for Switch Operation vs. Temperature (Load Current = 600mA) Temperature (°C) LED Current (mA) -40 - 20 0 20 4 0 60 80 100 0.6 0.5 0.4 0.3 0.2 0.1 CPC1018N Typical IF for Switch Dropout vs. Temperature (Load Current = 80mA) Temperature (°C) LED Current (mA) -40 0.6 0.5 0.4 0.3 0.2 0.1 -20 0 20 40 60 80 100 Load Voltage (V) Load Current (mA) 600 400 200 -200 -400 -600 CPC1018N Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mA CPC1018N Energy Rating Curve Time Load Current (A) 10µs 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 1ms100µs 100ms 1s10ms 10s 100s

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1018N-R03 ©Copyright 2005, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/8/05 For additional information please visit our website at: www.clare.com MECHANICAL DIMENSIONS 2.54 TYP. (0.100 TYP.) 2.18 MAX. (0.086) 0.38 TYP. (0.015 TYP.) 6.096 ± 0.102 (0.150 ± 0.003) 4.09 ± 0.20 (0.161 ± 0.008) 0.38 x 45° (0.015 x 45°) 1.020 ± 0.025 (0.040 ± 0.001) 0.432 ± 0.127 (0.008 ± 0.001) PC Board Pattern (Top View) 2.54 ± 0.127 (0.100 ± 0.005) 5.66 ± 0.14 (0.057) 0.889 (0.035) 4-Pin SOP ("N" Suffix) Dimensions: mm (inches) B0 = 4.70 (0.185) A A P = 8.00 (0.315) W = 12.00 MAX (0.472 MAX) K1 = 2.30 (0.091) SECTION A-A Tape and Reel Packaging for 4-pin SOP package

330.2 DiA

(13.00" DiA) Top Cover Tape Thickness

0.102 MAX

(0.004 MAX) K0 = 2.7 (0.106) Embossment Embossed Carrier A0 = 6.50 (0.256) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Manufacturing Information Soldering Recommended soldering processes are limited to 260 ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. RoHS 2002/95/EC