CPC1009N CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Description

Ordering Information

 Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Meters (Watt-Hour, Water, Gas)  Medical Equipment—Patient/Equipment Isolation  Security Systems  Aerospace  Industrial Controls  Extremely Low Output Leakage  1500V rms Input/Output Isolation  Small 4-Pin SOP Package  Low Drive Power Requirements (TTL/CMOS Compatible)  No Moving Parts  High Reliability  Arc-Free With No Snubbing Circuits  No EMI/RFI Generation  Machine Insertable, Wave Solderable  Tape & Reel Version Available CPC1009N is a miniature low voltage, low on-resistance, low off-state leakage, 1-Form-A solid state relay in a 4-Pin SOP package. The MOSFET switches and photovoltaic die use Clare’s patented OptoMOS ® architecture to provide 1500 Vrms of input-to-output isolation. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The CPC1009N uses Clare’s state of the art double-molded vertical construction to produce one of the world’s smallest 4-pin relays, which offers board space savings of 20% over the competitor’s larger 4-pin SOP relay. Approvals  UL Recognized Component: File # E76270  EN/IEC 60950 Compliant Switching Characteristics of Normally Open (Form A) Devices 2 3 + Control – Control Load Load Control ILOAD 10% 90% tON tOFF

www.clare.com2 CPC1009N R03 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings (@ 25˚C) Parameter Ratings Units Blocking Voltage 100 V P Reverse Input Voltage 5 V Input Control Current 50 mA Peak (10ms) 1 A Input Power Dissipation 70 mW T otal PowerDissipation 1 400 mW Isolation voltage Input to Output 1500 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate Linearly 3.33 mw / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C (Unless otherwise noted) Load Current Continuous 1 -I L - - 150 mA Peak t = 10ms I LPK - - 350 On-Resistance 2 IL=150mA R ON -58 Ω Off-State Leakage Current V L=100VP , T=115ºC I LEAK - - 20 nA Switching Speeds T urn-On I F=5mA, VL=10V t ON --2 ms T urn-Off I F=5mA, VL=10V t OFF - - 0.5 Output Capacitance 50V , f=1MHz C OUT -2 5 - p F Input Characteristics @ 25°C Input Control Current I L=150mA I F - 0.87 2 mA Input Dropout Current - I F 0.3 0.86 - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Current V R=5V I R -- 1 0 μA Input/Output Characteristics @ 25°C Capacitance Input to Output - - - 1 - pF 1 Load current derates linearly from 150mA @ 25oC to120mA @85oC. 2 Measurement taken within 1 second of on time.

Electrical Characteristics

www.clare.com 3R03 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Voltage Drop (V) Device Count (N) Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) Device Count (N) Typical On-Resistance Distribution (TA=25ºC, IL=150mA) On-Resistance (Ω) 106 112 118 124109 115 121 Blocking Voltage (V Device Count (N) Typical Blocking Voltage Distribution (TA=25ºC) LED Current (mA) Device Count (N) Typical IF for Switch Operation (TA=25ºC, IL=100mA) LED Current (mA) Device Count (N) Typical IF for Switch Dropout (TA=25ºC, IL=100mA) Turn-On (ms) Device Count (N) Typical Turn-On Time (TA=25ºC, IL=150mA, IF=5mA) Turn-Off (ms) Device Count (N) Typical Turn-Off Time (TA=25ºC, IL=150mA, IF=5mA) Load Current (mA) 190 180 170 160 150 140 130 120 110 100 Temperature (ºC) -40 -20 0 20 40 60 80 120 100 Typical Maximum Load Current vs. Temperature IF=10mA IF=5mA -20 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 20 40 60 80 100 120 Leakage (nA) Temperature (ºC) Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=100VP) Blocking Voltage (VP) -40 122 121 120 119 118 117 116 115 -20 0 20 40 60 80 100 Typical Blocking Voltage vs. Temperature Temperature (ºC) Turn-On (ms) -40 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 100 Typical Turn-On vs. Temperature (IL=100mA) Temperature (ºC) IF=5mA IF=10mA Turn-Off (ms) -40 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -20 0 20 40 60 80 100 Typical Turn-Off vs. Temperature (IL=100mA) Temperature (ºC) IF=10mA IF=5mA

www.clare.com4 CPC1009N R03 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Voltage Drop (V) Temperature (ºC) Typical LED Forward Voltage Drop vs. Temperature 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA Typical Turn-On vs. LED Forward Current (TA=25ºC, IL=120mA) LED Forward Current (mA) Turn-On (ms) 0 5 1 01 52 02 53 03 54 04 5 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 Typical On-Resistance vs. Temperature (IL=150mA) -40 -20 0 20 40 60 80 100 IF=10mA IF=5mA Instantaneous IF=5mA Steady State Temperature (ºC) On-Resistance (Ω) Typical Turn-Off vs. LED Forward Current (TA=25ºC, IL=120mA) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 5 1 01 52 02 53 03 54 04 55 0 LED Forward Current (mA) Turn-On (ms) Typical IF for Switch Operation vs. Temperature (IL=100mA) LED Current (mA) -40 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 100 Temperature (ºC) Typical IF for Switch Dropout vs. Temperature (IL=100mA) LED Current (mA) -40 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 100 Temperature (ºC) Load Voltage (V) Load Current (mA) 150 100 -50 -100 -150 Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) Energy Rating Curve (TA=25ºC) Time Load Current (A) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1ms 100ms 1s10ms 10s 100s 10μs 100 μs

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1009N-R03 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 12/11/08 For additional information please visit our website at: www.clare.com CPC1009N MECHANICAL DIMENSIONS Manufacturing Information RoHS 2002/95/EC e3Pb Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 4-Pin SOP Package Recommended PCB Land Pattern 2.54 (0.10) 5.60 (0.2205) 1.30 (0.0512) 0.60 (0.0217) Pin 1 4.089 ± 0.203 (0.161 ± 0.008)

2.54 Typ

(0.100 Typ) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.017 ± 0.005) 0.200 ± 0.025 (0.008 ± 0.001) 1.02 ± 0.025 (0.040 ± 0.001) Dimensions mm (inches)

2.184 Max

(0.086 Max) 0.381 TYP . (0.015 TYP .) 0.0254 - 0.102 (0.001 - 0.004) Embossment Embossed Carrier

330.2 Dia

(13.00 Dia) Top Cover Tape Thickness

0.102 Max

(0.004 Max) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 4-Pin SOP Package User Direction of Feed B0=4.70 (0.185) W=12.00 Max (0.472 Max) P=8.00 (0.315) A0=6.50 (0.256) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Dimensions mm (inches)