CPC1001N CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Description

Ordering Information

 Loop Detect  Ringing Detect  Sensor Circuitry  Instrumentation  Multiplexers  Data Acquisition  I/O Subsystems  Industrial Control  Small 4 Pin SOP Package  100mA Continuous Load Rating  1500Vrms Input/Output Isolation  Machine Insertable, Wave Solderable  Surface Mount and Tape & Reel Version Available CPC1001N is a unidirectional input optocoupler with a single transistor output. Current transfer ratios range from 100% to 800%. 2 3 + Control – Control Load Load Approvals  UL Recognized Component: File # E76270  EN/IEC 60950-1 Compliant  CSA Certified Component: Certificate # 1172007

www.clare.com2 CPC1001N R03 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Absolute Maximum Ratings Parameter Ratings Units Input Power Dissipation 1 150 mW Input Control Current Peak (10ms) 5m A Reverse Input Voltage 5 V Phototransistor 2 150 mW Isolation Voltage, Input to Output 1500 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate Linearly 1.33 mW / ºC 2 Derate Linearly 2.00 mW / ºC Electrical absolute maximum ratings are at 25°C

Electrical Characteristics

Characteristic Symbol Test Condition Typ Units T urn-On Time t ON IF=2mA, VCC=5V , RL=1KΩ 1 μsT urn-Off Time t OFF 30 Switching Characteristics @ 25ºC Parameters Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Phototransistor Blocking Voltage I CEO=10µA BV CEO 30 90 - V P Phototransistor Output (Dark) Current I F=0mA, VCEO=5V I CEO - 9 500 nA Saturation Voltage I F=1mA, IC=1mA V CE(sat) - - 0.3 V Current T ransfer Ratio I F=0.2mA, VCE=0.5V CTR 100 330 800 % Output Capacitance V CEO=25V , f=1MHz C OUT -6 - p F Input Characteristics @ 25°C Input Control Current I C=0.2mA, VCE=0.5V I F - 0.1 0.2 mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Input Reverse Current V R=5V I R - - 10 µA Common Characteristics @ 25°C Input to Output Capacitance - C I/O -3 - p F Switching Time Test Circuit VCC VCE RL IF Pulse Width=5ms Duty Cycle=1% IF 10% 90% t ON t OFF VCE

www.clare.com 3R03 PERFORMANCE DATA* *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. LED Forward Voltage (V) LED Forward Current (mA)0 LED Voltage vs. LED Current (TA=25ºC) LED Forward Voltage (V) LED Forward Current (mA) 0.1 100 LED Voltage vs. LED Current (TA=25ºC) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Voltage (V) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 LED Forward Voltage vs. Temperature IF=50mA IF=5mA IF=10mA IF=20mA IF=0.2mA IF=1mA IF=2mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Typical ICE (mA) 0.1 100 Typical ICE Current vs. Temperature (VCE=0.5V) IF=10mA IF=5mA IF=2mA IF=1mA IF=0.5mA IF=0.2mA IF=0.1mA Typical Voltage vs. Current (TA=25ºC) Collector Voltage (V) Collector Current (mA) IF=0.2mA IF=0.5mA IF=1mA IF=2mA IF=5mA IF=10mA LED Forward Current (mA) 0.1 1 10 CTR (%) 100 150 200 250 300 350 Typical CTR vs. LED Forward Current (VCE=0.5V) 55ºC 85ºC 25ºC -40ºC Temperature (ºC) -40 -20 0 20 40 60 80 100 Saturation Voltage (V) 0.08 0.10 0.12 0.14 0.16 0.18 0.20 Typical Saturation Voltage vs. Temperature (IF=2mA, IC=1mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) Blocking Voltage vs. Temperature Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) 100 200 300 400 500 Collector Leakage Current vs. Temperature VCC=10V VCC=5V VCC=3V Load Resistance (kΩ) 0.1 1 10 100 Turn-On Time (μs) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Turn-On Time vs. Load Resistance (TA=25ºC, VCC=5V) IF=5mA IF=2mA IF=1mA Load Resistance (kΩ) 0.1 1 10 100 Turn-Off Time (μs) 100 1000 Turn-Off Time vs. Load Resistance (TA=25ºC, VCC=5V) IF=5mA IF=1mA IF=2mA Refer to the Test Circuit on the previous page for these two graphs.

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1001N-R03 ©Copyright 2008, Clare, Inc. OptoMOS ® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/24/08 For additional information please visit our website at: www.clare.com CPC1001N MECHANICAL DIMENSIONS RoHS 2002/95/EC e3Pb MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 4-Pin SOP Package Recommended PCB Land Pattern 2.54 (0.10) 5.60 (0.2205) 1.30 (0.0512) 0.60 (0.0217) Pin 1 4.089 ± 0.203 (0.161 ± 0.008)

2.54 Typ

(0.100 Typ) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.017 ± 0.005) 0.200 ± 0.025 (0.008 ± 0.001) 1.02 ± 0.025 (0.040 ± 0.001) Dimensions mm (inches)

2.184 Max

(0.086 Max) 0.381 TYP . (0.015 TYP .) 0.0254 - 0.102 (0.001 - 0.004) Embossment Embossed Carrier

330.2 Dia

(13.00 Dia) Top Cover Tape Thickness

0.102 Max

(0.004 Max) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 4-Pin SOP Package User Direction of Feed B0=4.70 (0.185) W=12.00 Max (0.472 Max) P=8.00 (0.315) A0=6.50 (0.256) Pin 1 K0=2.70 (0.106) K1=2.30 (0.091) Dimensions mm (inches)