CP211 RFHIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 Product Features Application

  • Passive Integration on Silicon
  • Low Insertion Loss
  • High Isolation
  • Solder Pad
  • Low Cost
  • Repeater
  • Base Station
  • RF Sub-Systems

Description

The CP Series is a monolithic directional coupler for low cost wireless applications. Specifications at 25℃, 50Ω in/out impedance Block Diagram & Pin Out Absolute Maximum Ratings PARAMETER Units Min Typ Max Frequency Range MHz 1900 2200 Insertion Loss dB 0.3 0.5 Input Return Loss dB 25 40 Output Return Loss dB 25 35 Coupling dB 13 14 15 Coupling Return Loss dB 18 23 Isolation dB 18 23 Remarks MHz 2100 Parameter Value Input Power 1 W Operating Temperature -40 ~ +85℃ Storage Temperature -65 ~ + 150℃

▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 Typical Performance Data at 25℃ (SOT23-6L Package) -10 Frequency(GHz) Insertion Loss(dB) Insertion Loss vs. Frequency -40 -30 -20 -10 -50 Frequency(GHz) Output Return Loss(dB) Output Return Loss vs. Frequency -24 -18 -12 -30 Frequency(GHz) Coupling Port Return Loss (dB) Coupling Port Return Loss vs. Frequency -40 -30 -20 -10 -50 Frequency(GHz) Input Return Loss(dB) Input Return Loss vs. Frequency -40 -30 -20 -10 -50 Frequency(GHz) Coupling(dB) Coupling vs. Frequency -40 -30 -20 -10 -50 Frequency(GHz) Isolation(dB) Isolation vs. Frequency

▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time w ithout notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inclu ding without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase or ders. RFHIC products are not intended for use in life support equipment or application where ma lfunction of the product can be expected to result in persona l injury or death. Buyer uses or sells such products for any such unintended or unauthorized applicatio n, buyer shall indemnify, protect and hold RFHIC and its direct ors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. PCB Evaluation Board Layout Pattern PCB material (FR4), PCB thickness (0.8t), Via hole ( Φ0.7)