DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

CP12671_TINA2-D Tina2 Assembly XB-D Black 16.1 mm 9.65 mm Round PMMA PC Glue Ready FWHM Efficiency cd/lm Gerber File 14 degrees 88 % 8.700 Available Ordering number Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status CP12672_TINA2-M Tina2 Assembly XB-D Black 16.1 mm 9.65 mm Round PMMA PC Glue Ready FWHM Efficiency cd/lm Gerber File 29 degrees 82 % 2.700 Available Ordering number Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status CP12673_TINA2-O Tina2 Assembly XB-D Black 16.1 mm 9.65 mm Round PMMA PC Glue Ready FWHM Efficiency cd/lm Gerber File 35+14 degrees 84 % 4.300 Available Ordering number Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status CP12674_TINA2-W Tina2 Assembly XB-D Black 16.1 mm 9.65 mm Round PMMA PC Glue Ready FWHM Efficiency cd/lm Gerber File 39 degrees 81 % 1.800 Available October 17th 2012 21:59 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10

24240 SALO

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. October 17th 2012 21:59 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3 Ledil Oy Salorankatu 10 http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

  • Product series especially designed & optimized for XB-D series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220 degrees of Fahrenheit). Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf - Optic holder molded by high quality PC material (120 dergees of Celcius / 248 degrees of Fahrenheit). - Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glue options. http://www.ledil.com/datasheets/DataSheet_GLUES.pdf NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED manufacturer -this is important as cleaning shall under no circumstances damage LEDs or other electronics components on the PCB. Further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. October 17th 2012 21:59 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3 Ledil Oy Salorankatu 10

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

B C A D DESIGNED BY DATE CHECKED BY DATE DRAWN BY DATE This drawing is our property. It can't be reproduced or communicated without our written agreement. SCALE 2:1 WEIGHT(g) SHEET 1/1 SIZE DRAWING NUMBER REV DRAWING TITLE Materials: lens PMMA holder PC, black Fastening to application: Glue Tolerances for dimensions: 0-20mm tolerance value +-0.1mm Ledil Oy Salorankatu 10 FIN 24240 SALO Finland Datasheet Tina2 XB assy pv 19.03.2012 sn pv 19.03.2012 12.03.2012 9.65 2.5 2.5 16.1