DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Features
- High Voltage BVCEO=80V (min.)
- Operating temperature up to +85°C
- High isolation voltage between input and output V IOTM = 8200 V perk for CNY64 V IOTM = 10000 V perk for CNY64-V
- Rated recurring peak voltage (repetitive) VIORM = 2200 V
- Creepage current resistance according to VDE 0303/IEC 60112 comparative tracking index: CTI ≥ 200
- Thickness through insulation ≧3mm
- Pb free and RoHS compliant.
- CUL approved (No. E214129)
- VDE approved (No. 40027351)
- FIMKO approved (No. 25464)
Description
The CNY64S series contains an infrared emitting diode optically coupled to a phototransistor. These device is packaged in an 4-pin SMD package and providing a distance between input and output for highest safety requirement of >3mm.
Applications
z Switch mode power supply z Line receiver z Computer peripheral interface z Microprocessor system interface z Circuits for safe protective separation agains t electrical shock according to safety class II (reinforced isolation): - for appl. class I - IV at mains voltage ≤ 300 V - for appl. class I - IV at mains voltage ≤ 600 V - for appl. class I - III at mains voltage ≤ 1000 V according to DIN EN 60747-5-5 1. Anode 2. Cathode 3. Emitter 4. Collector
4 P I N D I P V E R Y H I G H I S O L A T I O N V O L T A G E
Everlight Electronics Co., Ltd. 2 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Rating Unit Forward current IF 75 mA Peak forward current (<10µs) IFM 1.5 A Reverse voltage VR 5 V Input Power dissipation PD 120 mW Collector current IC 50 mA Collector power dissipation PC 150 mW Collector-Emitter voltage VCEO 80 V Output Emitter-Collector voltage VECO 7 V Total power dissipation Ptot 250 mW Isolation voltage *1 V iso 8200 Vrms Operating temperature Topr -55~+85 °C Storage temperature Tstg -55~+100 °C Soldering temperature *2 T sol 260 °C Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1 & 2 are shorted together, and pins 3 & 4 are shorted together. *2 2mm from case, <10 seconds.
Everlight Electronics Co., Ltd. 3 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Electrical Characteristics (Ta=25°C unless specified otherwise) Input Parameter Symbol Min. Typ.* Max. Unit Condition Forward voltage VF - 1.6 2.0 V IF = 50mA Reverse current IR - - 10 µA VR = 5V Input capacitance Cin - - 100 pF V = 0, f = 1MHz Output Parameter Symbol Min. Typ.* Max. Unit Condition Collector-Emitter dark current ICEO - - 200 nA VCE = 20V, IF=0mA Collector-Emitter breakdown voltage BVCEO 80 - - V IC = 1mA Emitter-Collector breakdown voltage BVECO 7 - - V IE = 0.1mA Collector-Emitter capacitance C CE - - 50 pF VCE = 0V, f = 1MHz Transfer Characteristics Parameter Symbol Min. Typ.* Max. Unit Condition CNY64 50 - 300 CNY64A 63 - 125 Current Transfer Ratio CNY64B CTR 100 - 200 % IF = 5mA ,VCE = 5V Collector-emitter saturation voltage VCE(sat) - - 0.3 V IF = 10mA , IC = 1mA Coupling capacitance CIO - 0.3 - pF f=1MHz Isolation resistance RIO 1011 - - Ω VIO = 500Vdc Turn-on time Ton - 6 18 Turn-off time Toff - 7 18 VCC = 5V, IC = 5mA, RL = 100Ω Rise time tr - 3 18 Fall time tf - 5 18 µs VCC = 5V, IC = 5mA, RL = 100Ω * Typical values at Ta = 25°C
Everlight Electronics Co., Ltd. 4 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Typical Performance Curves
Figure 10. Switching Time Test Circuit & Waveforms
Everlight Electronics Co., Ltd. 6 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Order Information Part Number CNY64SX-V Note X = CTR rank option (A, B or none) V = VDE safety (optional) Option Description Packing quantity CNY64S Standard 60 units per tube CNY64S-V Standard + VDE 60 units per tube CNY64S(TA) Standard 500 units per tube
Everlight Electronics Co., Ltd. 7 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Package Drawings (Dimensions in mm) Recommended pad layout for surface mount leadform
Everlight Electronics Co., Ltd. 8 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Device Marking Notes EL denotes Everlight CNY64 denotes Part no. R denotes CTR rank (A or B) Y denotes 1 digit Year code WW denotes 2 digit Week code V denotes VDE safety (optional) E L CNY64 RYWWV
Everlight Electronics Co., Ltd. 9 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Tape & Reel Packing Specifications Tape dimensions Dimension No. A B Do D1 E F Dimension No. Po P1 P2 t W K Option TA Direction of feed from reel
Everlight Electronics Co., Ltd. 10 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series Solder Reflow Temperature Profile 150°C 1-3 °C/Sec Max 70 – 170 Sec 200°C 217°C >255 °C ( 30s Max ) 1-3 °C/Sec Max 60 – 140 Sec 260 °C( peak,10 Sec Max ) TIME (S)
Everlight Electronics Co., Ltd. 11 http:\\\\www.everlight.com Document No ：DPC-0000060 Rev. 1 June 18, 2010 CNY64S series DISCLAIMER 1. The specifications in this datasheet may be changed without notice. EVERLIGHT reserves the authority on material change for above specification. 2. When using this product, please obs erve the absolute maximum ratings and the instructions for use as outlined in this datasheet. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in this datasheet. 3. These specification sheets include materials prot ected under copyright of EVERLIGHT. Reproduction in any form is prohibited without the specific consent of EVERLIGHT.