DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

1 Copyright © 2010, Everlight All Rights Reserved. Release Date : May 23, 2013. Issue No: DPC-0000038 Rev. 6 www.everlight.com

6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER

Features:

  • Current transfer ratios in selected narrow range groups CNY17-1, CNY17F-1: 40-80% CNY17-2, CNY17F-2: 63-125% CNY17-3, CNY17F-3: 100-200% CNY17-4, CNY17F-4:160-320%
  • High isolation voltage between input and output (Viso = 5000 Vrms)
  • Creepage distance > 7.6 mm
  • Operating temperature up to +110°C
  • The CNY17F-X series offers no external base connection for minimum noise susceptibility
  • Compact dual-in-line package
  • Pb free and RoHS compliant.
  • UL approved (No. E214129)
  • VDE approved (No. 132249)
  • SEMKO approved
  • NEMKO approved
  • DEMKO approved
  • FIMKO approved
  • CSA approved

Description

The CNY17-X and CNY17F-X series of devices each consist of an infrared emitting diode optically coupled to a phototransistor. They are packaged in a 6-pin DIP package and available in wide-lead spacing and SMD option.

Applications

  • Power supply regulators
  • Digital logic inputs
  • Microprocessor inputs Schematic CNY17-X Pin Configuration 1. Anode 2. Cathode 3. No Connection 4. Emitter 5. Collector 6. Base Schematic CNY17F-X Pin Configuration 1. Anode 2. Cathode 3. No Connection 4. Emitter 5. Collector 6. No Connection

Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Input Forward current IF 60 mA Peak forward current (t = 10µs) IFM 1 A Reverse voltage VR 6 V Power dissipation (TA = 25°C) Derating factor (above 100°C) PD 100 mW 3.8 mW/°C Output Collector-Emitter voltage VCEO 80 V Collector-Base voltage*1 VCBO 80 V Emitter-Collector voltage VECO 7 V Emitter-Base voltage VEBO 7 V Power dissipation (TA = 25°C) Derating factor (above 100°C) PC 150 mW 9.0 mW/°C Total Power Dissipation PTOT 200 mW Isolation voltage *2 V ISO 5000 V rms Operating Temperature TOPR -55 to 110 °C Storage Temperature TSTG -55 to 125 °C Soldering temperature *3 T SOL 260 °C Notes: Only for CNY17-X series. *2 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 & 3 are shorted together, and pins 4, 5 & 6 are shorted together. *3 For 10 seconds.

Electro-Optical Characteristics (Ta=25℃ unless specified otherwise) Input Parameter Symbol Min. Typ. Max. Unit Condition Forward voltage VF - - 1.65 V IF = 60mA Reverse current IR - - 10 µA VR = 6V Input capacitance Cin - 18 - pF V = 0, f = 1MHz Output Parameter Symbol Min Typ. Max. Unit Condition Collector-Base dark current CNY17-X only C ICBO - - 20 nA VCB = 10V, IF = 0mA Collector-Emitter dark current ICBO - 50 nA VCE = 10V, IF=0mA Collector-Emitter breakdown voltage BVCEO 80 - - V IC = 1mA, IF = 0mA Collector-Base breakdown voltage CNY17-X only BVCBO 80 - - V IC = 0.1mA, IF = 0mA Emitter-Collector breakdown voltage BVECO 7 - - V IE = 0.1mA, IF = 0mA Collector-Emitter capacitance C CE - 8 - pF VCE = 0V, f =1MHz * Typical values at Ta = 25°C

Parameter Symbol Min Typ. Max. Unit Condition Current Transfer Ratio CNY17-1 CNY17F-1 CTR 40 - 80 % IF = 10mA ,VCE = 5V CNY17-2 CNY17F-2 63 - 125 CNY17-3 CNY17F-3 100 - 200 CNY17-4 CNY17F-4 160 - 320 Current Transfer Ratio CNY17-1 CNY17F-1 CTR 13 - - % IF = 1mA ,VCE = 5V CNY17-2 CNY17F-2 22 - - CNY17-3 CNY17F-3 34 - - CNY17-4 CNY17F-4 56 - - Collector-Emitter saturation voltage VCE(sat) - - 0.3 V IF = 10mA , IC = 2.5mA Isolation resistance RIO 1011 - - Ω VIO = 500Vdc Input-output capacitance CIO - 0.5 - pF VIO = 0, f = 1MHz Turn-on time Ton - 10 12 µs VCC = 10V, IC = 2mA, RL = 100Ω See Fig. 11 Turn-off time Toff - 9 12 Rise time Tr - 6 10 Fall time Tf - 8 10 Rise time Tr - 2 10 VCC = 5V, IF = 10mA, RL = 75Ω, See Fig. 11Fall time Tf - 3 10 * Typical values at Ta = 25°C

Typical Electro-Optical Characteristics Curves

Figure 11. Switching Time Test Circuit & Waveforms

CNY17-XY(Z)-V or CNY17F-XY(Z)-V Note X = Part no. (1, 2, 3 or 4) Y = Lead form option (S, S1, M or none) Z = Tape and reel option (TA, TB or none). V = VDE (optional) Option Description Packing quantity None Standard DIP-6 65 units per tube M Wide lead bend (0.4 inch spacing) 65 units per tube S (TA) Surface mount lead form + TA tape & reel option 1000 units per reel S (TB) Surface mount lead form + TB tape & reel option 1000 units per reel S1 (TA) Surface mount lead form (low profile ) + TA tape & reel option 1000 units per reel S1 (TB) Surface mount lead form (low profile ) + TB tape & reel option 1000 units per reel

Package Dimension (Dimensions in mm) Standard DIP Type Option M Type

Recommended pad layout for surface mount leadform Device Marking Notes EL denotes Everlight CNY17-X denotes Device Number (X: 1, 2, 3 or 4) Y denotes 1 digit Year code WW denotes 2 digit Week code V denotes VDE (optional) EL CNY17-X YW W V

Tape & Reel Packing Specifications Tape dimensions Dimension No. A B Do D1 E F Dimension No. Po P1 P2 t W K Option TA Option TB Direction of feed from reel Direction of feed from reel

  1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Reference: IPC/JEDEC J-STD-020D Preheat Temperature min (Tsmin) 150 °C Temperature max (Tsmax) 200°C Time (Tsmin to Tsmax) (ts) 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3 °C/second max Other Liquidus Temperature (TL) 217 °C Time above Liquidus Temperature (t L) 60-100 sec Peak Temperature (TP) 260°C Time within 5 °C of Actual Peak Temperature: TP - 5°C 30 s Ramp- Down Rate from Peak Temperature 6°C /second max. Time 25°C to peak temperature 8 minutes max. Reflow times 3 times
  1. Above specification may be change d without notice. EVERLIGH T will reserve authority on material change for above specification. 2. When using this product, please observe the absolute ma ximum ratings and the instructions for using outlined in these specification sh eets. EVERLIGHT assumes no re sponsibility for any damage resulting from use of the product which does not comply with the absolute maxi mum ratings and the instructions included in these specification sheets. 3. These specification sheet s include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.