CNY17-2-W00E

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• High collector-emitter voltage (VCEO = 70 V)
• High input-output isolation voltage (Viso = 5000 Vrms)
• Current Transfer Ratio (CTR: min. 40% at IF = 10 mA, VCE = 5 V)
• Response time (tr: typ., 5 µs at VCC = 10 V, IC = 2 mA, RL = 100 Ω)
• Dual-in-line package
• UL approved
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• Options available: – Leads with 0.4" (10.16 mm) spacing (W00) – Leads bend for surface mounting (300) – Tape and reel for SMD (500) – IEC/EN/DIN EN 60747-5-2 approvals (060)

Description

The CNY17 contains a light emitting diode opti - cally coupled to a photo-transistor. It is packaged in a 6-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Collector-emitter voltage is above 70 V. Response time, tr, is typically 5 µs and minimum CTR is 40% at input current of 10 mA.

Applications

• System appliances, measuring instruments
• Signal transmission between circuits of different potentials and impedances
• Feedback circuit in power supply Functional Diagram Schematic CNY17-x Phototransistor Optocoupler High Collector-Emitter Voltage Type Data Sheet CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. ANODE CATHODE VF IF 6 BASE COLLECTOR EMITTER IC 6 5 4 1 2 3 PIN NO. AND INTERNAL CONNECTION DIAGRAM 1. ANODE 2. CATHODE 3. NC 4. EMITTER 5. COLLECTOR 6. BASE

Ordering Information

CNY17-x is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component Accep- tance Notice #5, File CA 88324. RoHS Compliant Option -1 -2 -3 -4 40% 63% 100% 160% Part <CTR< <CTR< <CTR< <CTR< Surface Gull Tape IEC/EN/DIN Number 80% 125% 200% 320% Package Mount Wing & Reel EN60747-5-2 Quantity -000E -000E -000E -000E 300 mil 65 pcs DIP-6 per tube -300E -300E -300E -300E 300 mil X X 65 pcs DIP-6 per tube -500E -500E -500E -500E 300 mil X X X 1000 pcs DIP-6 per reel -060E -060E -060E -060E 300 mil X 65 pcs DIP-6 per tubeCNY17 -360E -360E -360E -360E 300 mil X X X 65 pcs DIP-6 per tube -560E -560E -560E -560E 300 mil X X X X 1000 pcs DIP-6 per reel -W00E -W00E -W00E -W00E 400 mil 65 pcs DIP-6 per tube -W60E -W60E -W60E -W60E 400 mil X 65 pcs DIP-6 per tube To order, choose a part number from the part number column and combine with the desired option from the op- tion column to form an order entry. Example 1: CNY17-1-360E to order product of 300 mil DIP-6 DC Gull Wing Surface Mount package in Tube packaging with 40%<CTR<80%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant. Example 2: CNY17-2-W00E to order product of 400 mil DIP-6 DC in Tube packaging with 63%<CTR<125% and RoHS compli- ant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

6.5 ± 0.5 (0.256) DIMENSIONS IN MILLIMETERS AND (INCHES) 7.3 ± 0.5 (0.287) 2.8 ± 0.5 (0.110) 2.54 ± 0.25 (0.1) 0.5 ± 0.1 (0.02) 3.5 ± 0.5 (0.138) 3.3 ± 0.5 (0.13) 0.5 (0.02) 7.62 ± 0.3 (0.3) 0.26 (0.010) 7.62 ~ 9.98 TYP. MODEL NO. ANODE LEAD FREE DATE CODE A CNY17- V Y YWW 6.5 ± 0.5 (0.256) DIMENSIONS IN MILLIMETERS AND (INCHES) 7.3 ± 0.5 (0.287) 2.8 ± 0.5 (0.110) 2.54 ± 0.25 (0.1) 0.5 ± 0.1 (0.02) 3.5 ± 0.5 (0.138) 3.3 ± 0.5 (0.13) 0.5 (0.02) 7.62 ± 0.3 (0.3) 0.26 (0.010) 7.62 ~ 9.98 TYP. MODEL NO. 6.5 ± 0.5 (0.256) DIMENSIONS IN MILLIMETERS AND (INCHES) 7.3 ± 0.5 (0.287) 2.8 ± 0.5 (0.110) 2.54 ± 0.25 (0.1) 0.5 ± 0.1 (0.02) 3.5 ± 0.5 (0.138) 7.62 ± 0.3 (0.3) 10.16 ± 0.5 (0.4) 2.3 ± 0.5 (0.09) 6.9 ± 0.5 (0.272) MODEL NO. ANODE DATE CODE LEAD FREE A CNY17 - Y YWW 0.26 (0.010)

60 ~ 150 sec 90 sec 60 sec 60 sec 25°C 150°C 200°C 250°C 260°C (Peak Temperature) 217°C Time (sec) Temperature (°C) Absolute Maximum Ratings Storage Temperature, TS –55˚C to +150˚C Operating Temperature, TA –55˚C to +100˚C Lead Solder Temperature, max. 260˚C for 10 s (1.6 mm below seating plane) Average Forward Current, IF 60 mA Reverse Input Voltage, VR 6 V Input Power Dissipation, PI 100 mW Collector Current, IC 150 mA Collector-Emitter Voltage, VCEO 70 V Emitter-Collector Voltage, VECO 6 V Collector-Base Voltage, VCBO 70 V Collector Power Dissipation 150 mW Total Power Dissipation 250 mW Isolation Voltage, Viso 5000 Vrms (AC for 1 minute, R.H. = 40 ~ 60%) Solder Reflow Temperature Profile 1) One-time soldering reflow is recommended within the condition of temperature and time profile shown at right. 2) When using another soldering method such as in- frared ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of (1) above. 6.5 ± 0.5 (0.256) DIMENSIONS IN MILLIMETERS AND (INCHES) 7.3 ± 0.5 (0.287) 2.54 ± 0.25 (0.1) 3.5 ± 0.5 (0.138) 7.62 ± 0.3 (0.3) 0.35 +0.15/-0.10 (0.014) 10.16 ± 0.3 (0.4) 1.2 ± 0.1 (0.047) 0.35 ± 0.25 (0.014) 1.0 ± 0.25 (0.039)ANODE DATE CODE LEAD FREE A CNY17 - Y YWW MODEL NO. Note: Non-halide flux should be used.

Figure 7. Relative current transfer ratio vs. tempera- Figure 8. Collector-emitter saturation voltage vs. Figure 9. Collector dark current vs. temperature. Figure 4. Forward current vs. forward voltage. Figure 11. Collector-emitter saturation voltage vs. Figure 10. Response time vs. load resistance.

200 TA = 50°C

Test Circuit for Response Time Test Circuit for Frequency Response For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologie s Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0536EN AV02-0772EN - October 18, 2007 VCC RD INPUT RL OUTPUT INPUT OUTPUT 10% 90% t t t t f d s r VCC RD RL OUTPUT