CNB2B9Z KOA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

KOA SPEER ELECTRONICS, INC. Bolivar Drive ■ P .O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3. Type Designation The type designation shall be the following form: Size ToleranceNominal Resistance J: ±5%2 significant figures + 1 multiplier 2B J103 Packaging TD: 7" Paper Taping TE: 7" Embossed Taping TE Termination Material T: Sn (Other termination styles may be available, please contact factory for options) TCNB Elements Circuit Symbol K: for CND1J10K V: Reverse common electrode Y: Side electrode type Z: for CNB Z Type CNB CND 4. Circuit Construction Absolute Maximum Working Voltage Resistance Tolerance Resistance Range E-3*, E-12** Part Designation Maximum Overload Voltage (5 Secs. Max.) Operating Temperature Range Power Rating @ 70°C (Per Element) T.C.R. (ppm/°C) Max. CNB2B9Z 50V 100V -55°C to +125°C±200 1K Ω - 470KΩ*J : ± 5 % CNB2E5Z 1/16W (.063W) * E-3 significant figures (per decade) are 1.0, 2.2 and 4.7. E-12 CND only 5. Standard Applications CND1J10K CND1J10Y CND2A10Y 63mW 50mW 32mW 25V 50V 50V 100V 47Ω - 39kΩ 22Ω - 39KΩ 100Ω - 100KΩ J: ±5% CND2B10V CND2B10 RR RR 5 4 1 23 CNB2E5Z RRRR RRRR 9 87 6 1 234 5 CNB2B9Z 103 R R R R R R R R 12345 9876 CND1J10VK R R R R R R R R 12345 9876 R R R R R R R 2345 10 9 8 7 R R R R R R R R R 12345 9876 CND1J10K CND1J10Y, CND2A10Y CND2B10V R R R R R R R R 12345 9876 CND2B10 103 103 103 103 SS-217 R2 6/4/07 1:29 PM Page 2

Resistors shall have a rated direct-current (DC) continuous working voltage or approximate sine-wave root-mean-square (R.M.S.) continuous working voltage at commercial-line frequency and wave-form corresponding the power rating as determined from the following formula: Where: E: Rated Voltage (V) E= √ P • R P: Power Rating (W) R: Nominal Resistance (Ω) However, if the rated voltage thus obtained surpasses the specified maximum working voltage, it shall be considered the rated voltage. 6. Environmental Applications For temperature in excess of 70°C, the load shall be derated in accordance with the following figure. KOA SPEER ELECTRONICS, INC. Bolivar Drive ■ P .O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. Derating Curve Surface Temperature Rise% Rated Power 100 20 40 60 80 100 120 140 160 12570 Ambient Temperature (°C) Temperature Rise (°C) 1/32 1/16 1/10 1/8 (W) Power CNB2B9Z CND2A10Y CND2B10 7. Body Color and Marking Body Color: Black Marking Color: White 10 3 103 Nominal resistance at 3-digit numbers 3-digit numbers The first and the second numbers show 2 effective numbers, the third number shows a multiple of 10. Example: 103 10,000 Ω 10kΩ 472 4,700 Ω 4.7kΩ * RCWV = Rated Continuous Working Voltage. 8. Performance Parameter Thermal Shock MIL-STD-202, Method 107, -55°C to +125°C, 5 cycles ±(1.0% + 0.1Ω)Low Temperature Operation MIL-R-55342 π 4.7.4, 1 hour @ -55°C followed by 45 minutes of RCWV* High Temperature Exposure MIL-R-55342 π 4.7.6, 100 hours @ 125°C Resistance to Solder Heat MIL-R-55342 π 4.7.7, 260°C for 10 seconds 1.2 Kg for 1 minute±(1.0% + 0.1Ω) ±(0.5% + 0.05Ω) Terminal Strength-Push Terminal Strength-Bend 5mm deflection in either direction for 10 seconds Moisture Resistance MIL-STD-202, Method 103, 40°C, 90 - 95% RH, 1000 hours ±5.0% ±1.0% Life Dielectric Withstanding Voltage Pulse Temperature Cycling MIL-STD-202, Method 108, 70°C, 1000 hours @ RCWV, 1.5 hr ON, 0.5 hr OFF 2.5 x RCWV, not exceeding max. overload voltage, 1 sec. ON, 25 sec. OFF , 10,000 cycles 30 min. @ -55°C, 15 min. @ +25°C, 30 min. @ +125°C, 15 min. @ +25°C, 5 cycles

15 Grams MinimumTerminal Adhesion Axial pull, one terminal at a time

1 minute minimum, MIL-STD-202, Method 301400V Insulation Resistance 1,000 M Ω Minimum Maximum Δ R Test Method SS-217 R2 6/4/07 1:29 PM Page 3

9.1 Taping Dimension (Embossed)

  1. Reel Marking The reel must be marked as follows: (1) Type designation (2) Nominal resistance (3) Quantity (4) Production lot number (5) Manufacturer’s name (6) Customer’s code number (7) Order number 10. Reel (Polystyrene Reel) KOA SPEER ELECTRONICS, INC. Bolivar Drive ■ P .O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. Type Component Size (mm) LWT Quantity/ Reel (Pieces) Taping (mm) Reel SizeA B WP 1 T 1 Carrier Tape (Notes) Dotted lines are applicable to only "TP" and "TB." (TP) Carrier Tape B A 1.5 +0.1 P1 2.0 4.0±0.1 Direction of feed 1.75 ±0.1 W T1 T1 Type ød (mm) e (mm) All 21 2 (Notes) Reel holes, shapes and design are examples øa ø13 øde Central hole (mm)Reel 53 11 8 001 Production Date Factory Continuous year, month number

8 KT & T factory

17~28 January 2004 ~ December 2004 29~40 January 2005 ~ December 2005 41~52 January 2006 ~ December 2006 53~64 January 2007 ~ December 2007 Lot number (8 digits) Tape material Tape width Quantity/Reel (pcs.) Embossed .472 in. (12 mm) 4,000 9. Taping Tape material and quantity per reel SS-217 R2 6/4/07 1:29 PM Page 4