DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
PMS 300 neg. Black neg.
features
- Exceptional filtering capabilities and superior characteristics
- Filter out high frequency content of digital signals
- Marking: Yellow three-digit on green protective coat
- Products with lead-free terminations meet EU RoHS requirements CR chip resistor array dimensions and construction .031 Ref. (0.8 Ref.) .025 Ref. (0.635Ref.) .016±.006 (0.4±0.15) .01±.004 (0.25±0.1) .012±.008 (0.3±0.2) .014±.004 (0.35±0.1) .157±.008 (4.0±0.2) .126±.006 (3.2±0.15) .006 Ref. (0.15 Ref.) .006±.004 (0.15±0.1) .02 Ref. (0.5 Ref.) .013±.004 (0.33±0.1) .083±.008 (2.1±0.2) .063±.006 (1.6±0.15)1J d1 pb2b1a1W .026±.004 (0.65±0.1) .026±.004 (0.65±0.1) tLSize Dimensions inches(mm) t W a1 L p Protective Coating Resistive Film Ceramic Substrate Inner Electrode Electrode For further information on packaging, please refer to Appendix A.
ordering information
T: Sn (Other termination styles available, contact factory for options) 3 digits + 1 for resistance tolerance for each Ex: 101/470J Y: 1J Nil: 2A TE: 7" embossed plastic (4,000 pieces/reel) 2ACR Type Size Terminations Capacitance Resistance Circuit Symbol Termination Material Packaging New Part # TE xxx/xxxJT10 Y EU 145KOA Speer Electronics, Inc.• 199 Bolivar Drive • Bradford, P A 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.12/30/08 resistors
1733 Reader's Spreads pg1-203:document 1/27/09 4:11 PM Page 143
146 KOA Speer Electronics, Inc.• 199 Bolivar Drive • Bradford, P A 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.12/31/08 resistors CR chip resistor array Part Designation Capacitor Item Capacitor Rating Resistor Item Resistor Rating circuit schematic 10 9 8 7 5 4 3 2 applications and ratings (CR1J) Voltage Rating Capacitance Tolerance Temperature Coefficient Dissipation Factor Capacitance Range 12V (DC) +30% / -20% 3% Maximum, 0 + 1Khz 1.0Vrms 10pF, 15pF, 22pF Power Rating Maximum Working Voltage Temperature Coefficient Resistance Tolerance Operating Temperature Range CR1J Resistor Range 1/16W (<70°C) –––– Maximum Overload Voltage 15 - 8V –––– Rated Ambient Temperature 70°C 79V ±200ppm/°C ±5% -25°C to +85°C 22Ω, 47Ω, 100Ω, 220Ω Part Designation Capacitor Item Capacitor Rating Resistor Item Resistor Rating applications and ratings (CR2A) Capacitance Measuring Condition Voltage Rating Capacitance Tolerance Temperature Coefficient Dissipation Factor 1 KHz ± 10% (1 Vrms ± 0.2V) 25V (DC) ±20% / ±30% 3% Maximum (at 1 KHz 1.0 Vrms) Power Rating Maximum Working Voltage Maximum Overload Voltage Resistor Tolerance Temperature Coefficient CR2A 0.063W 7.9V 15.8V ±5% ±200ppm/°C Insulation Resistance 1,000MΩ Minimum Dielectric Withstanding Voltage 62.5V DC, 5 sec., 50mA charge Rated Ambient Temperature +70°C Derating Curve environmental applications% Rated Power 120 -30 -20 -10 0 203 04 05 09 0 Ambient Temperature (°C) -25 70 8060 100 Operating Temperature Range -25°C to +85°C Capacitance Range 22pF, 47pF, 100pF Operating Temperature Range -25°C to +85°C Resistor Range 22Ω,47Ω,100Ω, 220Ω,470Ω, 1KΩ, 47KΩ ––––
1733 Reader's Spreads pg1-203:document 1/27/09 4:11 PM Page 144
PMS 300 neg. Black neg. CR chip resistor array environmental applications(continued) Performance Characteristics Parameter Requirement Test Method Dielectric Withstanding Voltage No evidence of flaming, fuming or breakdown 2.5 times maximum rated voltage for 5 seconds with 50 mA maximum charging current Within 2 minutes at DC 25V between terminal and another More than 103 MΩInsulation Resistance Immerse in the IPA @ 20°C to 25°C for 60 seconds ± 10 secondsNo mechanical damageResistance to Solvents No evidence of damage 2 hours in each direction of X, Y, Z on PCB at a frequency range of 10 - 55 - 10Hz with 1.5mm amplitude. Measurement shall be done 24 hours ± 4 hours @ room condition after test. Vibration Approximately 95% of the terminal should be covered with new solderImmerse in solder (H63A) @ 235° ± 5°C for 3 seconds ± 0.5 secondSolderability Terminal Strength (Bend Test) Specimen shall be soldered on PCB and support by applying strength so that the bending width becomes 3mm No mechanical damage Immerse in solder (H63A) @ 260° ± 5°C for 10 seconds ± 1 second Measurement shall be done 24 hours ± 4 hours @ room condition after test. No evidence of damage ∆C within ±20% ∆R within ±5% D.F. within 5% I.R. more than 100 MΩ Resistance to Solder Heat 100 cycles between -25°C/30 minutes and +85°C/30 minutes Measurement shall be done 24 hours ± 4 hours @ room condition after test. No evidence of damage ∆C within ±20% ∆R within ±5% D.F. within 5% I.R. more than 100 MΩ Temperature Cycling 40°C ± 2°C, 90 - 95% RH, 500 hours Capacitor: DC 25V, 500 hr ON Resistor: Rated working voltage, 1.5 hr ON, 0.5 hr OFF Measurement of capacitor shall be done 24 hours ± 4 hours @ nominal condition after test. No evidence of damage ∆C within ±20% ∆R within ±5% D.F. within 5% I.R. more than 100 MΩ Moisture Resistance 85°C ± 2°C, 1000 hours Capacitor: DC 25V, 1000 hr ON Resistor: Rated working voltage, 1.5 hr ON, 0.5 hr OFF Measurement of capacitor shall be done 24 hours ± 4 hours @ nominal condition after test. No evidence of damage ∆C within ±20% ∆R within ±5% D.F. within 5% I.R. more than 100 MΩ Load Life MIL-STD-202F, Method 106, 10 cycles Measurement shall be done 24 hours ± 4 hours @ room condition after test. No evidence of damage ∆C within ±20% ∆R within ±5% D.F. within 5% I.R. more than 100 MΩ Humidity (No Load) v v 147KOA Speer Electronics, Inc.• 199 Bolivar Drive • Bradford, P A 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.11/01/03 resistors