CMU200

CMU200 ROHDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 46

Technical content

Datasheet sections

• 2 R&S

¸CMU200 Universal Radio Communication Tester Data sheet Version 08.01 July 2007

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 3 R&S R&S BLUETOOTH R&S R&S Notes for measuring I/Q/IF signals applied to inputs of the R&S CMU-B17 option on the R&S R&S R&S The specifications for the R&S CMU200 (Order No. 1100.0008.02/10/30/53) refer to a fully equipped unit with all relevant options installed. CDMA2000® is a registered trademark of the Telecommunications Industry Association (TIA -USA). The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Rohde&Schwarz is under license.

4 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Base unit specifications Timebase TCXO Max. frequency drift in temperature range +5 °C to +45 °C ±1 × 10 Max. aging ±1 × 10 /year Timebase OCXO – R&S®CMU-B11 option Max. frequency drift in temperature range +5 °C to +45 °C ±1 × 10 Max. aging after 30 days of operation ±2 × 10 /year ±5 × 10 /day Warmup time at +25 °C approx. 5 min Timebase OCXO – R&S®CMU-B12 option Max. frequency drift in temperature range +5°C to +45 °C, referred to +25 °C ±5 × 10 with instrument orientation ±3 × 10 referred to turn-off frequency after 2 h warmup time following a 24 h off time at +25 °C ±5 × 10 Max. aging after 30 days of operation ±3.5 × 10 /year ±5 × 10 –10 /day Warmup time at +25 °C approx. 10 min Reference frequency inputs/outputs Synchronization input BNC connector REF IN Frequency sinewave squarewave (TTL level)

1 MHz to 52 MHz, step 1 kHz

10 kHz to 52 MHz, step 1 kHz Max. frequency variation ±5 × 10 Input voltage range 0.5 V to 2 V, rms Impedance 50 Ω Synchronization output 1 BNC connector REF OUT 1 Frequency 10 MHz from internal reference or frequency at synchronization input Output voltage >1.4 V, peak-peak Impedance 50 Ω Synchronization output 2 BNC connector REF OUT 2 Frequency net-specific frequencies in range 100 kHz to 40 MHz Output voltage f ≤ 13 MHz >1.0 V, peak-peak Impedance 50 Ω

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 5 RF generator Frequency range 100 kHz to 2700 MHz Frequency resolution 0.1 Hz Frequency uncertainty same as timebase + frequency resolution Frequency settling time <400 µs to Δf < 1 kHz Output level range RF 1 100 kHz to 2200 MHz

2200 MHz to 2700 MHz

–130 dBm to –27 dBm –130 dBm to –33 dBm RF 2 100 kHz to 2200 MHz –130 dBm to –10 dBm –130 dBm to –16 dBm RF 3 OUT 100 kHz to 2200 MHz –90 dBm to +13 dBm –90 dBm to +5 dBm Output level uncertainty in temperature range +20 °C to +35 °C RF 1, RF 2 output level ≥ –106 dBm

10 MHz to 450 MHz

450 MHz to 2200 MHz

output level > –117 dBm output level –117 dBm to –130 dBm <0.6 dB <0.6 dB <0.8 dB <0.6 dB <0.8 dB1 <1.5 dB1, 2 <1.5 dB1, 2 RF 3 OUT 10 MHz to 450 MHz output level –80 dBm to +10 dBm output level –90 dBm to +10 dBm output level –90 dBm to +5 dBm <0.8 dB <0.8 dB <1.0 dB Output level uncertainty in temperature range +5 °C to +45 °C RF 1, RF 2 output level ≥ –106 dBm output level > –117 dBm output level –117 dBm to –130 dBm <1.0 dB <1.0 dB <1.5 dB <1.0 dB <1.5 dB1 <1.5 dB 1, 2 <1.5 dB1, 2 RF 3 OUT 10 MHz to 450 MHz output level –80 dBm to +10 dBm output level –90 dBm to +10 dBm output level –90 dBm to +5 dBm <1.0 dB <1.0 dB <1.5 dB Output level settling time <4 µs Output level resolution 0.1 dB 1 Not valid at frequencies of net-clock harmonics. 2 Valid for RF1 only.

6 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Generator RF level repeatability typical values after 1 h warmup time output level ≥–80 dBm output level <–80 dBm <0.01 dB <0.1 dB VSWR RF 1 10 MHz to 2000 MHz

2000 MHz to 2200 MHz

<1.2 <1.3 <1.6 RF 2 10 MHz to 2200 MHz <1.2 <1.6 RF 3 OUT 10 MHz to 2200 MHz <1.5 <1.7 Attenuation of harmonics up to 7 GHz RF 1, RF 2 f 0 = 10 MHz to 200 MHz >20 dB RF 1, RF 2 f 0 = 200 MHz to 2200 MHz >30 dB RF 3 OUT f 0 = 10 MHz to 2200 MHz output level ≤+10 dBm >20 dB Attenuation of nonharmonics 10 MHz to 2200 MHz, at f > 5 kHz from carrier >40 dB Phase noise single sideband, f < 2.2 GHz Carrier offset 20 kHz to 250 kHz ≥250 kHz <–100 dBc, 1 Hz <–110 dBc, 1 Hz Residual FM f < 2.2 GHz

30 Hz to 15 kHz

ITU-T (formerly CCITT) <50 Hz, rms, <200 Hz, peak <5 Hz, rms Residual AM f < 2.2 GHz ITU-T (formerly CCITT) <0.02%, rms I/Q modulation Carrier suppression data for frequency offset range

0 Hz to ±135 kHz

40 dB FM modulation Deviation range 10 kHz to 440 kHz Deviation resolution 1 Hz Modulation frequency range 100 Hz to 50 kHz Modulation distortion modulation frequency 1 kHz, deviation 80 kHz <2 % Deviation uncertainty <5 % + resolution + residual FM RF analyzer VSWR RF 1 10 MHz to 2000 MHz

<1.2 <1.3 <1.6 RF 2 10 MHz to 2200 MHz <1.2 <1.6 RF 4 IN 10 MHz to 2200 MHz <1.5 <1.6 Inherent spurious response RF Attenuation → Low Distortion,

20 MHz to 2200 MHz,

except 1816.115 MHz <–50 dB

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 7 Inherent harmonics fin = 50 MHz to 1100 MHz, fselected = 100 MHz to 2200 MHz RF 1, RF 2 <–30 dB RF 4 IN <–20 dB Phase noise single sideband, f < 2.2 GHz Carrier offset 20 kHz to 250 kHz 250 kHz to 400 kHz ≥400 kHz <–100 dBc, 1 Hz <–110 dBc, 1 Hz <–118 dBc, 1 Hz Residual FM f < 2.2 GHz ITU-T (formerly CCITT) <50 Hz, rms, <200 Hz, peak <5 Hz, rms Residual AM f < 2.2 GHz ITU-T (formerly CCITT) <0.02%, rms Power meter (wideband) Frequency range 100 kHz to 2700 MHz Level range continuous power3 100 kHz to 2200 MHz +6 dBm to +47 dBm (50 W)

2200 MHz to 2700 MHz +10 dBm to +47 dBm (50 W)

(PEP) +53 dBm (200 W) continuous power 100 kHz to 2200 MHz –8 dBm to +33 dBm (2 W)

2200 MHz to 2700 MHz –4 dBm to +33 dBm (2 W)

peak envelope power4 (PEP) +39 dBm (8 W) continuous power and PEP 100 kHz to 2200 MHz –33 dBm to 0 dBm RF 4 IN

2200 MHz to 2700 MHz –29 dBm to 0 dBm

input level +10 dBm to +20 dBm 50 MHz to 2700 MHz <1.0 dB5 input level +20 dBm to +47 dBm RF 1 50 MHz to 2700 MHz <0.5 dB5, 6 input level –4 dBm to +6 dBm 50 MHz to 2700 MHz <1.0 dB 5 input level +6 dBm to +33 dBm RF 2 50 MHz to 2700 MHz <0.5 dB 5 input level –29 dBm to –19 dBm 50 MHz to 2700 MHz <1.5 dB input level –19 dBm to 0 dBm RF 4 IN 50 MHz to 2700 MHz <0.8 dB in manual mode 0.1 dB Level resolution in remote control mode 0.01 dB Power meter (frequency-selective) Frequency range 10 MHz to 2700 MHz Frequency resolution 0.1 Hz 3 50 W in temperature range +5 °C to +30 °C, linear degradation down to 25 W at +45 °C. 4 Mean value of power versus time must be equal to or less than allowed continuous power. 5 Temperature range +5 °C to +20 °C or +35 °C to +45 °C and f > 2200 MHz: add 0.2 dB. 6 Calibrated for input level >+33 dBm only in frequency range 800 MHz to 2000 MHz.

8 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Resolution bandwidths 10 Hz to 1 MHz in 1/2/3/5 steps Level range RF 1 continuous power 3

10 MHz to 2200 MHz

4 (PEP) –40 dBm to +47 dBm (50 W) –34 dBm to +47 dBm (50 W) +53 dBm (200 W) RF 2 continuous power 4 (PEP) –54 dBm to +33 dBm (2 W) –48 dBm to +33 dBm (2 W) +39 dBm (8 W) RF 4 IN continuous power and PEP –80 dBm to 0 dBm –74 dBm to 0 dBm Level uncertainty in temperature range +20 °C to +35 °C RF 1, RF 2 50 MHz to 2200 MHz <0.5 dB <0.7 dB RF 4 IN 50 MHz to 2200 MHz <0.7 dB <0.9 dB Level uncertainty in temperature range +5 °C to +45 °C RF 1, RF 2 50 MHz to 2200 MHz <1.0 dB <1.0 dB RF 4 IN 50 MHz to 2200 MHz <1.0 dB <1.1 dB Level resolution in manual mode in remote control mode 0.1 dB 0.01 dB RF level measurement repeatability typical values after 1 h warmup input level ≥–40 dBm input level <–40 dBm <0.01 dB <0.03 dB Spectrum analyzer Frequency range 10 MHz to 2.7 GHz Span zero span to full span Frequency resolution 0.1 Hz Resolution bandwidths 10 Hz to 1 MHz in 1/2/3/5 steps Sweep time depending on resolution bandwidth (RBW) ≥100 ms Display 560 dots, horizontal Marker up to 3, absolute/relative Display line 1 Display scale 10/20/30/50/80/100 dB Level range RF 1 continuous power 3 peak envelope power4 (PEP) up to +47 dBm (50 W) up to +53 dBm (200 W) RF 2 continuous power peak envelope power4(PEP) up to +33 dBm (2 W) up to +39 dBm (8 W) RF 4 IN continuous power and PEP up to 0 dBm Level uncertainty in temperature range +20 °C to +35 °C RF 1, RF 2 50 MHz to 2200 MHz <0.5 dB <0.7 dB RF 4 IN 50 MHz to 2200 MHz <0.7 dB <0.9 dB

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 9 Level uncertainty in temperature range +5 °C to +45 °C RF 1, RF 2 50 MHz to 2200 MHz <1.0 dB <1.0 dB RF 4 IN 50 MHz to 2200 MHz <1.0 dB <1.1 dB Reference level for full dynamic range RF Attenuation → Low Noise, logarithmic level display RF 1 +10 dBm to +47 dBm RF 2 –4 dBm to +33 dBm RF 4 IN –22 dBm to 0 dBm Displayed average noise level RF Attenuation → Low Noise, RBW → 1 kHz, <–100 dBc <–95 dBc Inherent spurious response RF Attenuation → Low Distortion, except 1816.115 MHz <–50 dB Inherent harmonics fin = 50 MHz to 1100 MHz, fselected = 100 MHz to 2200 MHz RF 1, RF 2 <–30 dB RF 4 IN <–20 dB General specifications Operating temperature range +5 °C to +45 °C, in line with EN60068-2-1 and -2 Storage temperature range –25 °C to +60 °C, in line with EN60068-2-1 and -2 Humidity +40 °C, non-condensing 80 % relative humidity, in line with EN 60068-2-3 Electromagnetic compatibility in line with EMC Directive 89/336/EEC, applied standard: EN 61326 (immunity for industrial environment; class B emissions) CAN/CSA-C22.2 No. 1010.1 Mechanical resistance non-operating mode Vibration sinusoidal in line with EN 60068-2-6, EN 61010-1, MIL-T-28800 D class 5, 5 Hz to 150 Hz, max. 2 g at 55 Hz, 55 Hz to 150 Hz, 0.5 g const Vibration random in line with EN 60068-2-64 10 Hz to 300 Hz, acceleration 1.2 g rms Shock in line with EN 60068-2-27, MIL-STD- 810D 40 g shock spectrum Power supply power factor correction, in line with EN61000-3-2 Input 100 V to 240 V ±10 % (AC), max. 500 VA,

50 Hz to 400 Hz –5 % to +10 %

Power consumption base unit with typical options approx. 130 W approx. 180 W

10 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Display 21 cm TFT color display (8.4”) Resolution 640 × 480 pixels (VGA resolution) Pixel failure rate <2 × 10 Dimensions W × H × D, overall 465.1 mm × 197.3 mm × 517.0 mm 18.31 in × 7.77 in × 20.35 in base unit approx. 14 kg approx. 30.86 lb Weight with typical options approx. 18 kg approx. 39.68 lb Inputs and outputs (rear panel) IF 3 RX CH1 BNC female Frequency WCDMA other networks/RF

7.68 MHz

10.7 MHz

Max. output level 0 dBm Impedance 50 Ω Remote control interfaces IEC/IEEE bus IEC 60625-2 (IEEE 488. 2) 24-pin Amphenol connector Serial interface COM 1, COM 2 RS- 232-C (COM) 9-pin D-Sub connector Printer interface LPT parallel (Centronics compatible) 25-pin D-Sub connector Keyboard PS/2 connector External monitor (VGA) 15-pin D-Sub connector

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 11 GSM specifications – mobile station test RF generator Modulation GMSK, B × T = 0.3 8PSK Frequency range GSM400 band 460 MHz to 468 MHz

488 MHz to 496 MHz

GSM850 band 869 MHz to 894 MHz GSM900 band 921 MHz to 960 MHz GSM1800 band 1805 MHz to 1880 MHz GSM1900 band 1930 MHz to 1990 MHz Attenuation of inband spurious emissions >50 dB Inherent phase error GMSK <1°, rms <4°, peak Inherent EVM 8PSK <2 %, rms Frequency settling time to residual phase of 4° <500 μs Output level range GMSK RF 1 –130 dBm to –27 dBm RF 2 –130 dBm to –10 dBm RF 3 OUT –90 dBm to +13 dBm Output level range 8PSK RF 1 –130 dBm to –31 dBm RF 2 –130 dBm to –14 dBm RF 3 OUT –90 dBm to +9 dBm Output level resolution 0.1 dB Output level uncertainty in temperature range +20 °C to 35 °C RF 1, RF 2 output level >–117 dBm <0.5 dB RF 3 OUT –90 dBm to +10 dBm (GMSK) –90 dBm to +6 dBm (8PSK) <0.7 dB <0.7 dB Output level uncertainty in temperature range +5 °C to 45 °C RF 1, RF 2 output level >–117 dBm <0.7 dB RF 3 OUT –90 dBm to +10 dBm (GMSK) –90 dBm to +6 dBm (8PSK) <0.9 dB <0.9 dB

12 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 R&S®CMU-B95 option additional RF generator Modulation GMSK, B × T = 0.3 8PSK Frequency range GSM400 band 460 MHz to 468 MHz GSM850 band 869 MHz to 894 MHz GSM900 band 921 MHz to 960 MHz GSM1800 band 1805 MHz to 1880 MHz GSM1900 band 1930 MHz to 1990 MHz Frequency resolution 200 kHz Frequency uncertainty same as time base, see base unit specifications Inherent phase error GMSK <5°, rms Output level range GMSK RF 1 without R&S CMU-U99 with R&S CMU-U99 –122 dBm to –72 dBm –110 dBm to –60 dBm RF 2 –110 dBm to –60 dBm Output level range 8PSK RF 1 without R&S CMU-U99 with R&S CMU-U99 –122 dBm to –76 dBm –110 dBm to –64 dBm RF 2 –110 dBm to –64 dBm Output level resolution 1 dB Reduced input level range if R&S CMU-B95 is installed RF 1 continuous input power max. 2 W R&S®CMU-B96 option additional RF generator Path 1 for GSM Modulation GMSK, B × T = 0.3 8PSK Frequency range GSM400 band 460 MHz to 468 MHz GSM850 band 869 MHz to 894 MHz GSM900 band 921 MHz to 960 MHz GSM1800 band 1805 MHz to 1880 MHz GSM1900 band 1930 MHz to 1990 MHz Frequency resolution 2.5 kHz Frequency uncertainty same as time base, see base unit specifications Inherent phase error GMSK <5°, rms

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 13 Output level range GMSK RF 1 without R&S CMU-U99 with R&S CMU-U99 –115 dBm to –72 dBm –103 dBm to –60 dBm RF 2 –103 dBm to –60 dBm Output level range 8PSK RF 1 without R&S CMU-U99 with R&S CMU-U99 –115 dBm to –76 dBm –103 dBm to –64 dBm RF 2 –103 dBm to –64 dBm Output level range GMSK overrange mode RF 1 without R&S CMU-U99 with R&S CMU-U99 –110 dBm to –28 dBm –90 dBm to –14 dBm RF 2 –90 dBm to –14 dBm RF 3 OUT –70 dBm to +9 dBm Output level range 8PSK overrange mode RF 1 without R&S CMU-U99 with R&S CMU-U99 –110 dBm to –32 dBm –90 dBm to –18 dBm RF 2 –90 dBm to –18 dBm RF 3 OUT –70 dBm to +5 dBm Output level resolution 1 dB Influence on RF interface Reduced input level range if R&S CMU-B96 is installed RF 1 continuous input power max. 2 W RF level uncertainty usage of R&S CMU-B96 in overrange mode may influence all RF signal levels and their quality RF analyzer Frequency range GSM400 band 450 MHz to 458 MHz

478 MHz to 486 MHz

GSM850 band 824 MHz to 849 MHz GSM900 band 876 MHz to 915 MHz GSM1800 band 1710 MHz to 1785 MHz GSM1900 band 1850 MHz to 1910 MHz Power meter (frequency-selective) Level range continuous power3 –40 dBm to +47 dBm (50 W) RF 1 peak envelope power4 (PEP) +53 dBm (200 W) continuous power –54 dBm to +33 dBm (2 W) RF 2 peak envelope power4 (PEP) +39 dBm (8 W) RF 4 IN continuous power and PEP –80 dBm to 0 dBm in temperature range +20 °C to +35 °C <0.5 dB Level uncertainty in temperature range +5 °C to +45 °C <0.7 dB in manual mode 0.1 dB Level resolution in remote control mode 0.01 dB Measurement bandwidth selectable 500 kHz or 600 kHz

14 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Modulation analysis Level range peak envelope power (PEP) RF 1 see footnote 4 –6 dBm to +53 dBm RF 2 see footnote 4 –20 dBm to +39 dBm RF 4 IN –60 dBm to 0 dBm Inherent phase error GMSK <0.6°, rms <2°, peak Inherent EVM 8PSK ≤1.0 %, rms Frequency measurement uncertainty ≤10 Hz + drift of time base, see base unit specifications Measurement bandwidth selectable 500 kHz or 600 kHz Burst power measurement Reference level for full dynamic range GMSK, RF Attenuation → Low Noise RF 1 see footnote 4 +10 dBm to +53 dBm RF 2 see footnote 4 –4 dBm to +39 dBm RF 4 IN –22 dBm to 0 dBm Reference level for full dynamic range 8PSK, RF Attenuation → Low Noise RF 1 see footnote 4 +6 dBm to +49 dBm RF 2 see footnote 4 –8 dBm to +35 dBm RF 4 IN –26 dBm to –4 dBm Dynamic range Filter → 500 kHz, rms, RF Attenuation → Low Noise GMSK >72 dB 8PSK >69 dB Relative measurement uncertainty result > –40 dB <0.1 dB –60 dB ≤ result ≤ –40 dB <0.5 dB Resolution in active part of burst 0.1 dB Measurement bandwidth selectable 500 kHz or 600 kHz

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 15 Spectrum due to modulation Reference level for full dynamic range GMSK, RF Attenuation → Low Noise RF 1 +10 dBm to +47 dBm RF 2 –4 dBm to +33 dBm RF 4 IN –22 dBm to 0 dBm Test method relative measurement, averaging Filter bandwidth 30 kHz resolution filter, 5 pole Measurement at an offset of 100, 200, 250, 400, 600, 800, 1000, 1200, 1400, 1600, 1800 kHz Dynamic range with offset ≥1200 kHz >74 dB Spectrum due to switching Reference level for full dynamic range GMSK, RF Attenuation → Low Noise RF 1 +10 dBm to +47 dBm RF 2 –4 dBm to +33 dBm RF 4 IN –22 dBm to 0 dBm Test method absolute measurement, max. hold over several measurements Filter bandwidth 30 kHz resolution filter, 5 pole Measurement at an offset of 400, 600, 800, 1200, 1800 kHz Dynamic range with offset ≥1200 kHz >72 dB R&S®CMU-B52 option speech codec Speech decoder output SPEECH HANDSET OUT 9-pin D-Sub connector Output impedance <10 Ω Maximum output current 20 mA, peak Full-range output level 1 V, peak Speech coder input SPEECH HANDSET IN 9-pin D-Sub connector Input impedance 100 k Ω Full-range input level low sensitivity high sensitivity

1.4 V, peak

0.1 V, peak

16 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 TDMA specifications – mobile station test RF generator Frequency range signaling mode US Cellular 869 MHz to 894 MHz PCS (US) 1930 MHz to 1990 MHz Frequency range non-signaling mode 10 MHz to 2200 MHz Frequency resolution non-signaling mode 1 Hz Frequency uncertainty same as time base, see base unit specifications Output level range RF 1 –130 dBm to –32 dBm RF 2 –130 dBm to –15 dBm RF 3 OUT –90 dBm to +8 dBm Output level resolution 0.1 dB Output level uncertainty see base unit specifications Modulation π/4 DQPSK or unmodulated (non-signaling mode) Uncertainty EVM <2.5 %, rms Carrier suppression >40 dB RF analyzer Frequency range signaling mode US Cellular 824 MHz to 849 MHz PCS (US) 1850 MHz to 1910 MHz Frequency range non-signaling mode 10 MHz to 2200 MHz Frequency resolution non-signaling mode 1 Hz Frequency uncertainty same as time base, see base unit specifications Modulation analysis Frequency range signaling mode US Cellular 824 MHz to 849 MHz PCS (US) 1850 MHz to 1910 MHz EVM residual <2.0 %, rms residual <4 %, peak I/Q offset residual <–50 dB (0.3%) I/Q imbalance residual <–50 dB (0.3%)

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 17 Frequency measurement range –2 kHz to +2 kHz Frequency measurement uncertainty ≤5 Hz + drift of time base, see base unit specifications Power meter (frequency-selective) Level range see base unit specifications Level uncertainty see base unit specifications Power versus time measurement Reference level for full dynamic range RF 1 +4 dBm to +47 dBm RF 2 –10 dBm to +33 dBm RF 4 IN –28 dBm to –6 dBm Dynamic range Filter → 100 kHz, rms, RF Attenuation → Low Noise >74 dB Relative measurement uncertainty result > –40 dB <0.1 dB –60 dB ≤ result ≤ –40 dB <0.5 dB Residual leakage power level <–65 dBm Adjacent channel power measurement Dynamic range first adjacent channel >45 dB second and third adjacent channel >55 dB

18 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 AMPS specifications – mobile station test RF generator Frequency range signaling mode US Cellular 869 MHz to 894 MHz Frequency range non-signaling mode 10 MHz to 2200 MHz Frequency resolution non-signaling mode 1 Hz Frequency uncertainty same as time base, see base unit specifications Output level range RF 1 –130 dBm to –27 dBm RF 2 –130 dBm to –10 dBm RF 3 OUT –99 dBm to +13 dBm Output level resolution 0.1 dB Output level uncertainty see base unit specifications and add 0.1 dB FM modulation Deviation range 100 Hz to 20 kHz Deviation resolution 1 Hz Modulation frequency range 100 Hz to 15.999 kHz Modulation distortion SINAD, modulation frequency 1 kHz, deviation 8 kHz, BW 30 Hz to 15 kHz ≥40 dB Residual FM BW 300 Hz to 3 kHz <10 Hz, rms Deviation uncertainty modulation frequency 1 kHz, deviation 8 kHz, BW 30 Hz to 15 kHz <2 % of setting + residual FM Deviation frequency response modulation frequency 300 Hz to 15.999 kHz ≤1 dB RF analyzer Frequency range signaling mode US Cellular 824 MHz to 849 MHz Frequency range non-signaling mode 10 MHz to 2200 MHz Frequency resolution non-signaling mode 1 Hz Frequency uncertainty same as time base, see base unit specifications

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 19 Power meter (frequency-selective) Max. level range RF 1 0 dBm to +53 dBm RF 2 –14 dBm to +39 dBm RF 4 IN –37 dBm to +0 dBm Level uncertainty see base unit specifications Level resolution 0.1 dB FM measurement Dynamic range 30 dB below max. level RF bandwidth 2 × deviation + 4 × modulation frequency 136 kHz Deviation range 0 Hz to 47 kHz Resolution 1 Hz Modulation frequency range 100 Hz to 18 kHz Residual FM BW 300 Hz to 3 kHz <5 Hz, rms BW 6 Hz to 20 kHz <18 Hz, rms Deviation uncertainty BW 6 Hz to 20 kHz <1 % of reading + residual FM Carrier frequency error Measurement range –47 kHz to +47 kHz Measurement uncertainty ≤2 kHz + drift of time base, see base unit specifications AF generator See specifications of R&S CMU-B41 option audio generator/analyzer AF analyzer See specifications of R&S CMU-B41 option audio generator/analyzer

20 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 CDMA2000® specifications – mobile station test Standards CDMA2000 standards CDMA2000 test standards TIA/EIA IS-2000 Rev. 0 TIA/EIA IS-98-F RF generator Frequency range US/Korean Cellular (band class 0) 860.025 MHz to 893.985 MHz North American PCS (band class 1) 1930.000 MHz to 1990.000 MHz TACS band (band class 2) 917.0125 MHz to 959.9875 MHz JTACS band (band class 3) 832.0125 MHz to 869.9875 MHz Korean PCS (band class 4) 1840.000 MHz to 1870.000 MHz NMT-450 (band class 5) 421.675 MHz to 493.480 MHz IMT-2000 (band class 6) 2110.000 MHz to 2169.950 MHz North American 700 MHz Cellular band (band class 7) 746.000 MHz to 764.000 MHz 1800 MHz band (band class 8) 1805.000 MHz to 1879.950 MHz 900 MHz band (band class 9) 925.000 MHz to 958.750 MHz secondary 800 MHz band (band class 10) 851.000 MHz to 939.975 MHz 400 MHz european PAMR (band class 11) 421.675 MHz to 493.475 MHz 800 MHz PAMR band (band class 12) 915.0125 MHz to 920.9875 MHz

2.5 GHz IMT-2000 extension

(band class 13)

2620.000 MHz to 2690 MHz

US PCS 1.9 GHz band (band class 14) 1930.000 MHz to 1995.000 MHz AWS band (band class 15) 2110.000 MHz to 2155.000 MHz US 2.5 GHz band (band class 16) 2624.000 MHz to 2690.000 MHz US 2.5 GHz forward link only band (band class 17) 2624.000 MHz to 2690.000 MHz Frequency resolution channel spacing in line with standard Frequency uncertainty same as time base, see base unit specifications Output level range modulated signal f < 2200 MHz –120 dBm to –33 dBm RF 1 f ≥ 2200 MHz –120 dBm to –39 dBm f < 2200 MHz –120 dBm to –16 dBm RF 2 f ≥ 2200 MHz –120 dBm to –22 dBm f < 2200 MHz –99 dBm to +5 dBm RF 3 OUT f ≥ 2200 MHz –99 dBm to –1 dBm Output level resolution modulated signal 0.1 dB Output level uncertainty in temperature range +20 °C to +35 °C output level ≥ –108 dBm f < 2200 MHz <0.5 dB RF 1, RF 2 f ≥ 2200 MHz <0.7 dB –80 dBm to +4 dBm f < 2200 MHz <0.7 dB RF 3 OUT f ≥ 2200 MHz <0.9 dB Output level uncertainty in temperature range +5 °C to +45 °C output level ≥ –108 dBm f < 2200 MHz <0.7 dB RF 1, RF 2 f ≥ 2200 MHz <1.5 dB –80 dBm to +4 dBm f < 2200 MHz <0.9 dB RF 3 OUT f ≥ 2200 MHz <1.5 dB

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 21 Modulation Dual BPSK, multiple QPSK 1.2288 Mcps AWGN see AWGN generator Carrier suppression >35 dB Waveform quality factor (ρ) >0.985 Code channel level uncertainty relative to the total CDMA output power F-PICH, F-PCH, F-FCH, F-SCH1, F-SCH2 all other channels approx. 0.1 dB approx. 0.25 dB Code channel resolution 0.1 dB Code channel level range relative to the total CDMA output power PICH, SYNC, FCH, SCH0, SCH1, PCH QPCH (relative to PICH level) –20 dB to –1 dB –5 dB to +2 dB AWGN generator Bandwidth >1.8 MHz Output level resolution 0.1 dB Output level uncertainty bandwidth 1.23 MHz approx. 0.2 dB Output level range relative to total CDMA output power –20 dB to +4 dB Supported service options in signaling mode Loopback service options SO 2, 9, 55 Speech service options SO 1, 3, 17, 0x8000 Test data service option SO 32 Packet data service option SO 33 Messaging tele service option SO 6, 14 RF analyzer Frequency range US/Korean Cellular (band class 0) 815.025 MHz to 848.985 MHz North American PCS (band class 1) 1850.000 MHz to 1910.000 MHz TACS band (band class 2) 872.0125 MHz to 914.9875 MHz JTACS band (band class 3) 887.0125 MHz to 924.9875 MHz Korean PCS (band class 4) 1750.000 MHz to 1780.000 MHz NMT-450 (band class 5) 411.675 MHz to 483.480 MHz IMT-2000 (band class 6) 1920.000 MHz to 1979.950 MHz North American 700 MHz Cellular band (band class 7) 776.000 MHz to 794.000 MHz 1800 MHz band (band class 8) 1710.000 MHz to 1784.950 MHz 900 MHz band (band class 9) 880.000 MHz to 913.750 MHz secondary 800 MHz band (band class 10) 806.000 MHz to 900.975 MHz 400 MHz european PAMR (band class 11) 411.675 MHz to 483.475 MHz 800 MHz PAMR band (band class 12) 870.0125 MHz to 875.9875 MHz (band class 13) 2500.000 MHz to 2570.000 MHz US PCS 1.9 GHz band (band class 14) 1850.000 MHz to 1915.000 MHz AWS band (band class 15) 1710.000 MHz to 1755.000 MHz US 2.5 GHz band (band class 16) 2502.000 MHz to 2568.000 MHz Measurement filter in line with standard bandwidth 1.23 MHz Frequency resolution channel spacing in line with standard Frequency uncertainty same as time base, see base unit specifications

22 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Power meter (frequency-selective) Level range HPSK, O-QPSK signal RF 1 f < 2200 MHz f ≥ 2200 MHz –40 dBm to +44 dBm –34 dBm to +44 dBm RF 2 f < 2200 MHz f ≥ 2200 MHz –54 dBm to +30 dBm –48 dBm to +30 dBm RF 4 IN f < 2200 MHz f ≥ 2200 MHz –80 dBm to –9 dBm –74 dBm to –9 dBm Level uncertainty in temperature range +20 °C to +35 °C f < 2200 MHz f ≥ 2200 MHz <0.5 dB <0.7 dB RF 1, RF 2, RF 4 IN in temperature range +5 °C to +45 °C f < 2200 MHz f ≥ 2200 MHz <0.7 dB <0.9 dB Level resolution 0.1 dB Modulation analyzer Level range HPSK, O-QPSK signal RF 1 f < 2200 MHz f ≥ 2200 MHz –40 dBm to +44 dBm –34 dBm to +44 dBm RF 2 f < 2200 MHz f ≥ 2200 MHz –54 dBm to +30 dBm –48 dBm to +30 dBm RF 4 IN f < 2200 MHz f ≥ 2200 MHz –80 dBm to –9 dBm –74 dBm to –9 dBm RC1, RC2 (O-QPSK) waveform quality, error vector magnitude, magnitude error, phase error ρ uncertainty for ρ 0.9 to 1 <0.003 Frequency measurement range –3 kHz to +3 kHz Frequency measurement uncertainty f < 2200 MHz f ≥ 2200 MHz <10 Hz + drift of time base, <15 Hz + drift of time base, see base unit specifications RC3, RC4 (HPSK) waveform quality, error vector magnitude, magnitude error, phase error, channel power, code domain power, peak code domain error power, ρ uncertainty for ρ 0.9 to 1 <0.003 Frequency measurement range –3 kHz to +3 kHz Frequency measurement uncertainty <10 Hz + drift of time base, see base unit specifications Relative measurement uncertainty result >–33 dB <0.1 dB

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 23 Measurements Modulation overview EVM versus time, graphical ME versus time, graphical PE versus time, graphical I/Q analyzer Power standby/access-probe power open loop time response gated output power maximum output power minimum output power Spectrum Code Domain Power code domain power code domain error power channel power time/phase offset relative to pilot Receiver FER for FCH, SCH RLP/throughput statistics forward power control R&S®CMU-B85 option speech codec Speech decoder output SPEECH HANDSET OUT 9-pin D-Sub connector Output impedance <10 Ω Maximum output current 20 mA, peak Full-range output level 1 V, peak Speech coder input SPEECH HANDSET IN 9-pin D-Sub connector Input impedance 100 k Ω Full-range input level low sensitivity high sensitivity

24 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 1xEV-DO specifications – access terminal test 1xEV-DO standards TIA/EIA IS-856-2 Standards 1xEV-DO test standards (access terminal) TIA/EIA IS-866-A RF generator Frequency range US/Korean Cellular (band class 0) 860.025 MHz to 893.985 MHz North American PCS (band class 1) 1930.000 MHz to 1990.000 MHz Public Safety Bands (PSB) 772.000 MHz to 802.000 MHz TACS band (band class 2) 917.0125 MHz to 959.9875 MHz JTACS band (band class 3) 832.0125 MHz to 869.9875 MHz Korean PCS (band class 4) 1840.000 MHz to 1870.000 MHz NMT-450 (band class 5) 421.675 MHz to 493.480 MHz IMT-2000 (band class 6) 2110.000 MHz to 2169.950 MHz North American 700 MHz cellular band (band class 7) 746.000 MHz to 764.000 MHz 1800 MHz band (band class 8) 1805.000 MHz to 1879.950 MHz 900 MHz band (band class 9) 925.000 MHz to 958.750 MHz secondary 800 MHz band (band class 10) 851.000 MHz to 939.975 MHz 400 MHz european PAMR (band class 11) 421.675 MHz to 493.475 MHz 800 MHz PAMR band (band class 12) 915.0125 MHz to 920.9875 MHz (band class 13) US PCS 1.9 GHz band (band class 14) 1930.000 MHz to 1995.000 MHz AWS band (band class 15) 2110.000 MHz to 2155.000 MHz US 2.5 GHz band (band class 16) 2624.000 MHz to 2690.000 MHz US 2.5 GHz forward link only band (band class 17) 2624.000 MHz to 2690.000 MHz Frequency resolution channel spacing in line with standard Frequency uncertainty same as time base, see base unit specifications Statistics Statistic count 1 to 1000 Values current, average, min/max Trigger Trigger sources free run, internal, external, IF power, RF power Trigger output 24-pin D-Sub connector AUX 3 s uper frame, power control frame, paging frame, sync frame, PP2S Output level range modulated signal RF 1 f < 2200 MHz f ≥ 2200 MHz –120 dBm to –33 dBm –120 dBm to –39 dBm RF 2 f < 2200 MHz f ≥ 2200 MHz –120 dBm to –16 dBm –120 dBm to –22 dBm RF 3 OUT f < 2200 MHz f ≥ 2200 MHz –99 dBm to +5 dBm –99 dBm to –1 dBm Output level resolution modulated signal 0.1 dB

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 25 Output level uncertainty in temperature range +20 °C to +35 °C RF 1, RF 2 output level ≥–108 dBm f < 2200 MHz f ≥ 2200 MHz <0.5 dB <0.7 dB RF 3 OUT –80 dBm to +4 dBm f < 2200 MHz f ≥ 2200 MHz <0.7 dB <0.9 dB Output level uncertainty in temperature range +5 °C to +45 °C RF 1, RF 2 output level ≥–108 dBm f < 2200 MHz f ≥ 2200 MHz <0.7 dB <1.5 dB RF 3 OUT –80 dBm to +4 dBm f < 2200 MHz f ≥ 2200 MHz <0.9 dB <1.5 dB Modulation Dual BPSK 1.2288 Mcps AWGN see AWGN generator Carrier suppression >35 dB Waveform quality factor (ρ) >0.985 Code channel level uncertainty relative to total 1xEV-DO output power approx. 0.1 dB Code channel resolution 0.1 dB Code channel level range relative to the total 1xEV-DO output power PICH, SYNC, FCH, SCH0, SCH1, PCH QPCH (relative to PICH level) –20 dB to –1 dB –5 dB to +2 dB AWGN generator Bandwidth >1.8 MHz Output level resolution 0.1 dB Output level uncertainty bandwidth 1.23 MHz approx. 0.2 dB Output level range relative to total 1xEV-DO output power –20 dB to +4 dB Supported applications in signaling mode Test applications FTAP/RTAP, FETAP/RETAP Default signaling application Default packet application

26 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 RF analyzer Frequency range US/Korean Cellular (band class 0) 815.025 MHz to 848.985 MHz North American PCS (band class 1) 1850.000 MHz to 1910.000 MHz Public Safety Bands (PSB) 742.000 MHz to 772.000 MHz TACS band (band class 2) 872.0125 MHz to 914.9875 MHz JTACS band (band class 3) 887.0125 MHz to 924.9875 MHz Korean PCS (band class 4) 1750.000 MHz to 1780.000 MHz NMT-450 (band class 5) 411.675 MHz to 483.480 MHz IMT-2000 (band class 6) 1920.000 MHz to 1979.950 MHz North American 700 MHz Cellular band (band class 7) 776.000 MHz to 794.000 MHz 1800 MHz band (band class 8) 1710.000 MHz to 1784.950 MHz 900 MHz band (band class 9) 880.000 MHz to 913.750 MHz secondary 800 MHz band (band class 10) 806.000 MHz to 900.975 MHz 400 MHz european PAMR (band class 11) 411.675 MHz to 483.475 MHz 800 MHz PAMR band (band class 12) 870.0125 MHz to 875.9875 MHz (band class 13) 2500.000 MHz to 2570.000 MHz US PCS 1.9 GHz band (band class 14) 1850.000 MHz to 1915.000 MHz AWS band (band class 15) 1710.000 MHz to 1755.000 MHz US 2.5 GHz band (band class 16) 2502.000 MHz to 2568.000 MHz Measurement filter in line with standard bandwidth 1.23 MHz Frequency resolution channel spacing in line with standard Frequency uncertainty same as time base, see base unit specifications Statistics Statistic count 1 to 1000 Values current, average, min/max Trigger Trigger sources free run, internal, external, IF power, RF power Trigger output 24-pin D-Sub connector AUX 3 ControlSlot, ControlChannel, slot, PP2S Power meter (frequency-selective) Level range modulated signal RF 1 f < 2200 MHz f ≥ 2200 MHz –40 dBm to +44 dBm –34 dBm to +44 dBm RF 2 f < 2200 MHz f ≥ 2200 MHz –54 dBm to +30 dBm –48 dBm to +30 dBm RF 4 IN f < 2200 MHz f ≥ 2200 MHz –80 dBm to –9 dBm –74 dBm to –9 dBm Level uncertainty RF 1, RF 2, RF 4 IN in temperature range +20 °C to +35 °C f < 2200 MHz f ≥ 2200 MHz <0.5 dB <0.7 dB in temperature range +5 °C to +45 °C f < 2200 MHz f ≥ 2200 MHz <0.7 dB <0.9 dB Level resolution 0.1 dB

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 27 Modulation analyzer Level range modulated signal RF 1 f < 2200 MHz f ≥ 2200 MHz –40 dBm to +44 dBm –34 dBm to +44 dBm RF 2 f < 2200 MHz f ≥ 2200 MHz –54 dBm to +30 dBm –48 dBm to +30 dBm RF 4 IN f < 2200 MHz f ≥ 2200 MHz –80 dBm to –9 dBm –74 dBm to –9 dBm Waveform quality (ρ) uncertainty for ρ 0.9 to 1 <0.003 Frequency measurement range –3 kHz to +3 kHz Frequency measurement uncertainty <10 Hz + drift of time base, see base unit specifications Relative measurement uncertainty result >–33 dB <0.1 dB Measurements Modulation overview EVM versus time, graphical ME versus time, graphical PE versus time, graphical I/Q analyzer Power Spectrum Code domain power code domain power code domain error power channel power Receiver in signaling mode FTAP/RTAP, FETAP/RETAP

28 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 WCDMA specifications – mobile station (UE) test Standard 3GPP FDD Symbol rate 3.84 MHz Synchronization output 2 BNC connector REF OUT 2 Frequency 30.72 MHz / n, n = 1 to 32 RF generator Channels non-signaling mode P-CPICH, P-SCH, S-SCH, P-CCPCH, PICH, DPCH, up to 4 HS-SCCHs, HS- PDSCH, E-AGCH, E-RGCH/E-HICH OCNS R99 OCNS R5 16-channel orthogonal channel noise 6-channel orthogonal channel noise AWGN bandwidth ≥5.76 MHz reference measurement channels (RMC) in line with 3GPP TS 34.121 12.2 kbit/s, 64 kbit/s, 144 kbit/s, 384 kbit/s Channels signaling mode, codes selectable until conflict in code space occurs P-CPICH, P-SCH, S-SCH, P-CCPCH, S-CCPCH, AICH, PICH, up to 4 HS- SCCHs, HS-PDSCH OCNS R99 OCNS R5 16-channel orthogonal channel noise 6-channel orthogonal channel noise AWGN bandwidth ≥ 5.76 MHz DPCH signaling radio bearer (SRB) 1.7 kbi t/s, 2.5 kbit/s, 3.4 kbit/s, 13.6 kbit/s DPCH reference measurement channels (RMC) in line with 3GPP TS 34.121 DL and UL DL/UL BTFD 12.2 kbit/s, 64 kbit/s, 144 kbit/s, 384 kbit/s 144 kbit/s / 64 kbit/s, 384 kbit/s / 64 kbit/s, 384 kbit/s / 144 kbit/s 1.95 kbit/s, 4.75 kbit/s, 5.15 kbit/s, 5.9 kbit/s, 6.7 kbit/s, 7.4 kbit/s, 7.95 kbit/s 10.2 kbit/s, 12.2 kbit/s DPCH voice (echo or speech codec) 4.75 kbit/s, 5.15 kbit/s, 5.9 kbit/s, 6.7 kbit/s, 7.4 kbit/s, 7.95 kbit/s 10.2 kbit/s, 12.2 kbit/s Frequency range non-signaling mode

869 MHz to 894 MHz

925 MHz to 960 MHz

1805 MHz to 1880 MHz

1930 MHz to 1990 MHz

2110 MHz to 2170 MHz

2620 MHz to 2690 MHz

Frequency range signaling mode band 1 band 2 band 3 band 4 band 5 band 6 band 7 band 8 band 9

2110 MHz to 2155 MHz

875 MHz to 885 MHz

1844.9 MHz to 1874.9 MHz Frequency offset –100 kHz to +100 kHz

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 29 Frequency resolution 0.1 Hz Frequency setting by channel number or frequency Output level range RF 1 –120 dBm to –37 dBm RF 2 –120 dBm to –20 dBm RF 3 OUT –100 dBm to 0 dBm manual mode 0.1 dB Output level resolution remote mode 0.01 dB Output level uncertainty in temperature range +20 °C to +35 °C RF 1, RF 2 output level ≥–120 dBm f < 2200 MHz f ≥ 2200 MHz <0.6 dB <0.8 dB RF 3 OUT output level ≥–80 dBm f < 2200 MHz f ≥ 2200 MHz <0.8 dB <1.0 dB Output level uncertainty in temperature range +5 °C to +45 °C RF 1, RF 2 output level ≥–120 dBm f < 2200 MHz f ≥ 2200 MHz <0.9 dB <1.5 dB RF 3 OUT output level ≥–80 dBm f < 2200 MHz f ≥ 2200 MHz <1.0 dB <1.5dB Output level setting setting reference relative to CPICH or total output power Channel levels non-signaling mode P-CPICH, P-SCH, S-SCH, P-CCPCH, PICH, DPCH, OCNS, HS-SCCH, HS- PDSCH, E-AGCH, E-RGCH/E-HICH –30 dB to +15 dB relative to CPICH Channel levels signaling mode P-CPICH, P-SCH, S-SCH, P-CCPCH, S-CCPCH, PICH, AICH, DPCH, OCNS, HS-SCCH, HS-PDSCH –30 dB to +15 dB relative to CPICH Signal quality Error vector magnitude (EVM) global EVM for DL RMC in line with 3GPP TS 34.121 C3.1 to C3.4 with DPCH/CPICH = 0 dB <8 %, rms Signal quality 16QAM Error vector magnitude (EVM) global EVM for 16QAM reference setup: 3GPP TS34.121 FRC H-Set3 for 16 QAM <8 %, rms

30 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 R&S®CMU-B96 additional RF generator option Path 2 for WCDMA Standard 3GPP FDD Frequency range non-signaling mode Frequency range WCDMA signaling mode band 1 band 2 band 3 band 4 band 5 band 6 band 8 band 9 1844.9 MHz to 1874.9 MHz Frequency resolution 2.5 kHz Frequency uncertainty same as time base, see base unit specifications Error vector magnitude (EVM) global EVM for DL RMC in line with 3GPP TS 34.121 C3.1 to C3.4 with DPCH/CPICH = 0 dB <8 %, rms Output level range RF 1 without R&S CMU-U99 with R&S CMU-U99 –115 dBm to –82 dBm –103 dBm to –70 dBm RF 2 –103 dBm to –70 dBm Output level resolution RF1 and RF2 0.1 dB Output level range overrange mode RF 1 without R&S CMU-U99 with R&S CMU-U99 –110 dBm to –38 dBm –90 dBm to –24 dBm RF 2 –90 dBm to –24 dBm RF 3 OUT –70 dBm to –1 dBm Output level resolution for overrange mode 1 dB Influence on RF interface Reduced input level range if R&S CMU-B96 is installed RF 1 continuous input power max. 2 W RF level uncertainty the usage of R&S CMU-B96 in overrange mode may influence all RF signal levels and quality

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 31 RF analyzer (TX measurements) Frequency range non-signaling mode

824 MHz to 849 MHz

880 MHz to 915 MHz

1710 MHz to 1785 MHz

1850 MHz to 1910 MHz

1920 MHz to 1980 MHz

2500 MHz to 2570 MHz

Frequency range signaling mode band 1 band 2 band 3 band 4 band 5 band 6 band 7 band 8 band 9

1710 MHz to 1755 MHz

830 MHz to 840 MHz

1749.9 MHz to 1784.9 MHz Frequency offset –100 kHz to +100 kHz Frequency resolution 1 Hz Frequency setting by channel number or frequency Level setting by autoranging or manual mode Max. level setting range RF 1 peak envelope power 4 (PEP) –38 dBm to +53 dBm RF 2 peak envelope power 4 (PEP) –52 dBm to +39 dBm RF 4 IN peak envelope power (PEP) –77 dBm to +0 dBm Statistics Statistic count 1 to 1000 Values current, average, min/max Trigger non-signaling mode Trigger sources free run, internal, external, IF power, slot, frame, TPC, HSDPCCH, auto Trigger input 15-pin D-Sub connector AUX 3 pin 8 external Trigger slot delay 0 to 14 slots Trigger delay offset –10239 to + 10239 × 1/4 chip Trigger output 15-pin D-Sub connector AUX 3 pin 2 to 5 frame, slot, TPC, HSDPCCH Trigger signaling mode Trigger sources free run, exte rnal, slot, frame,signaling, IF power, TPC, preamble, PRACH-MSG part, compressed mode, change of TFC, HSDPCCH, auto Trigger input 15-pin D-Sub connector AUX 3 pin 8 external Trigger slot delay 0 to 14 slots Trigger delay offset –10239 to + 10239 × 1/4 chip Trigger output 15-pin D-Sub connector AUX 3 pin 2 to 4 15-pin D-Sub connector AUX 3 pin 5, depending on signaling state and trigger source frame, slot, TPC preamble, PRACH-MSG part, compressed mode,change of TFC, HSDPCCH

32 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Modulation analysis Measurement filter receiver filter in line with standard 3.84 MHz, RRC, α = 0.22 Analysis modes QPSK, WCDMA uplink Input level range RF 1 continuous power 3 peak envelope power4 (PEP) –21 dBm to +47 dBm –16 dBm to +53 dBm RF 2 continuous power peak envelope power4 (PEP) –35 dBm to +33 dBm –30 dBm to +39 dBm RF 4 IN continuous power and PEP –50 dBm to 0 dBm Error vector magnitude (EVM) Measurement range up to 25%

Applications

EVM versus time, graphical ME versus time, graphical PE versus time, graphical I/Q analyzer Measured parameters error vector magnitude magnitude error phase error I/Q origin offset I/Q imbalance peak code domain error waveform quality Inherent EVM RF Attenuation → Low Noise RF Attenuation → Low Noise, with R&S CMU-Z6 calibration and f < 2200 MHz RF Attenuation → Low Noise, with R&S CMU-Z6 calibration and f ≥ 2200 MHz <2.5 %, rms <1.5 %, rms <2.5 %, rms Resolution 0.1% Measurement length QPSK mode WCDMA mode 1 timeslot (2560 chips) 1/4 timeslot (640 chips) 1 timeslot Marker in graphical menus reference , Abs1, Abs2, D-line Frequency error Measurement range ±3 kHz Uncertainty f < 2200 MHz and max. value of 10 slots f ≥ 2200 MHz and average value of 10 slots <10 Hz + drift of time base, <10 Hz + drift of time base, see base unit specifications Resolution 1 Hz I/Q offset Inherent I/Q offset <–55 dB Resolution 0.01 dB I/Q imbalance Inherent I/Q imbalance <–30 dB Resolution 0.01 dB Peak code domain error (PCDE) Inherent PCDE for SF = 4 <–40 dB Resolution 0.01 dB

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 33 I/Q analyzer non-signaling mode Display QPSK mode and WCDMA mode waveform type zoom rotation measurement length graphical display constellation diagram, vector diagram, eye diagram I, Q, I/Q 1, 2, 5, 10, 20 0°, 45° 1 timeslot (2560 chips), 1/4 timeslot (640 chips) Spectrum measurements Reference level for full dynamic range RF 1 rms peak envelope power4(PEP) +14 dBm to +47 dBm up to +53 dBm RF 2 rms peak envelope power4(PEP) +0 dBm to +33 dBm up to +39 dBm RF 4 IN rms peak envelope power (PEP) –18 dBm to 0 dBm up to 0 dBm Adjacent channel leakage ratio (ACLR filter application) Measurement filter receiver filter in line with standard 3.84 MHz, RRC, α = 0.22 Display bar graphs of rms and peak values, numerical values rms and peak of current, average and max. values Frequency offsets first adjacent channel second adjacent channel ±5 MHz ±10 MHz Uncertainty for –33 dBc first adjacent channel level for –43 dBc second adjacent channel level <0.5 dB <0.5 dB Dynamic range (High dynamic mode → On) first adjacent channel second adjacent channel >54 dB >64 dB Resolution 0.1 dB Measurement length 1 timeslot (2560 chips) 1/2 timeslot (1280 chips) 1/4 timeslot (640 chips) 1/8 timeslot (320 chips) Adjacent channel leakage ratio (ACLR FFT/OBW application) Measurement filter receiver filter in line with standard 3.84 MHz, RRC, α = 0.22 Display continuous spectrum with 25 MHz bandwidth, numerical values rms and peak of current, average and max. values Frequency offsets first adjacent channel second adjacent channel ±5 MHz ±10 MHz Resolution bandwidth 20 kHz,

3.84 MHz

(High dynamic mode → On) first adjacent channel second adjacent channel >54 dB >64 dB Occupied bandwidth measurement range 1 MHz to 6 MHz measurement uncertainty <50 kHz measurement resolution 20 kHz Measurement length ≥1 timeslot (2560 chips) ≥1/2 timeslot (1280 chips) ≥1/4 timeslot (640 chips) ≥1/8 timeslot (320 chips) Spectrum emission mask (SEM application) Measurement filter receiver filter in line with standard 3.84 MHz, RRC, α = 0.22 Display graphical and numerical values of current, average and max values

34 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Resolution bandwidth frequency offset 2.5 MHz to 3.5 MHz 3.5 MHz to 7.5 MHz 7.5 MHz to 8.5 MHz 8.5 MHz to 12.5 MHz 30 kHz

1 MHz

Measurement interval ≥1 timeslot (2560 chips) ≥1/2 timeslot (1280 chips) ≥1/4 timeslot (640 chips) ≥1/8 timeslot (320 chips) Power meter (frequency-selective)7 Measurement applications maximum power, minimum power off power power versus slot inner loop power bandwidth approx. 7 MHz 3.84 MHz, RRC, α = 0.22 bandwidth approx. 7 MHz 3.84 MHz, RRC, α = 0.22 Power versus slot measurement width step width step count step delay 0.25, 0.5, 1 slot 1 slot to 30 slots 1 to 100 0 to 100 Level range RF 1 continuous power 3 peak envelope power4 (PEP) –52 dBm to +47 dBm –42 dBm to +53 dBm RF 2 continuous power peak envelope power4 (PEP) –66 dBm to +33 dBm –56 dBm to +39 dBm RF 4 IN continuous power8 peak envelope power (PEP) –89 dBm to 0 dBm –79 dBm to 0 dBm Level uncertainty in temperature range +20 °C to +35 °C RF 1 –10 dBm to +47 dBm, rms f < 2200 MHz f ≥ 2200 MHz –44 dBm to –10 dBm, rms f < 2200 MHz f ≥ 2200 MHz <0.5 dB <0.7 dB <0.7 dB <0.9dB RF 2 –24 dBm to +33 dBm, rms f < 2200 MHz f ≥ 2200 MHz –60 dBm to –24 dBm, rms f < 2200 MHz f ≥ 2200 MHz <0.5 dB <0.7 dB <0.7 dB <0.9 dB RF 4 IN –24 dBm to 0 dBm, rms f < 2200 MHz f ≥ 2200 MHz –85 dBm to –24 dBm, rms f < 2200 MHz –83 dBm to –24 dBm, rms f ≥ 2200 MHz <0.5 dB <0.7 dB <0.7 dB <0.9 dB 7 The specified data is valid for RF Attenuation set to Low Noise. 8 Upper limit depends on crest factor.

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 35 Level uncertainty in temperature range +5 °C to +45 °C RF 1 –10 dBm to +47 dBm, rms f < 2200 MHz f ≥ 2200 MHz –44 dBm to –10 dBm, rms f < 2200 MHz f ≥ 2200 MHz <0.7 dB <0.9 dB <0.9 dB <1.1 dB RF 2 –24 dBm to +33 dBm, rms f < 2200 MHz f ≥ 2200 MHz –60 dBm to –24 dBm, rms f < 2200 MHz f ≥ 2200 MHz <0.7 dB <0.9 dB <0.9 dB <1.1 dB RF 4 IN –24 dBm to 0 dBm, rms f < 2200 MHz f ≥ 2200 MHz –85 dBm to –24 dBm, rms f < 2200 MHz –83 dBm to –24 dBm, rms f ≥ 2200 MHz <0.7 dB <0.9 dB <0.9 dB <1.1 dB Level resolution 0.01 dB Code domain power7 Measurement filter receiver filter in line with standard 3.84 MHz, RRC, α = 0.22 CDP/code auto CDP/code manual CDP/code Rho auto Display modes CDP/code Rho manual auto mode Spreading Factor (SF) manual setting 4, 8, 16, 32, 64, 128, 256 Level range RF 1 –8 dBm to +47 dBm RF 2 –22 dBm to +33 dBm RF 4 IN –45 dBm to 0 dBm Level uncertainty <0.5 dB Level resolution 0.01 dB Receiver quality (bit error rate measurements) Measurement types BER, BLER, DBLER, FDR Measurement method loopback mode 2, loopback mode 1 with RLC transparent Number of transport blocks 1 to 50000 DL/UL transport block size symmetric, asymmetric DL/UL timing 876 chips to 1172 chips

36 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 R&S®CMU-B52 option speech codec Speech decoder output SPEECH HANDSET OUT 9-pin D-Sub connector Output impedance <10 Ω Maximum output current 20 mA, peak Full-range output level 1 V, peak Speech coder input SPEECH HANDSET IN 9-pin D-Sub connector Input impedance 100 k Ω low sensitivity 1.4 V, peak Full-range input level high sensitivity 0.1 V, peak

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 37 Bluetooth® specifications Standards Bluetooth Core Specifications Version 1.1 RF generator RF channel definition 2402 MHz + k × 1 MHz, k = 0 to 93 Frequency range 2402 MHz to 2495 MHz Frequency resolution channel spacing in line with standard 1 MHz Frequency offset range ±500 kHz Frequency offset resolution 1 kHz Frequency uncertainty ±1 Hz + drift of time base, see base unit specifications Europe (except France), USA France RX/TX single frequency Hopping scheme modes in line with standard Reduced hopping Output level range modulated signal RF 1 –106 dBm to –33 dBm RF 2 –106 dBm to –12 dBm RF 3 OUT –90 dBm to +5 dBm Output level uncertainty in temperature range +20 °C to +35 °C RF 1, RF 2 <0.9 dB RF 3 OUT <1.1 dB Output level uncertainty in temperature range +5 °C to +45 °C RF 1, RF 2 <1.6 dB RF 3 OUT <1.6 dB Output level resolution 0.1 dB Modulation GFSK AC coupling cut-off frequency 100 Hz 1 Mbps, B × T = 0.5 Modulation index 11110000 pattern, frequency deviation 160 kHz 0.32 Modulation index range frequency deviation 100 kHz to 220 kHz 0.20 to 0.44 Modulation index resolution 0.01 Modulation index uncertainty 11110000 pattern, frequency deviation 160 kHz ±5 %

38 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 RF analyzer RF channel definition 2402 MHz + k × 1 MHz, k = 0 to 93 Frequency range 2402 MHz to 2495 MHz Frequency resolution channel spacing in line with standard 1 MHz Frequency uncertainty ±1 Hz + drift of time base, see base unit specifications Europe (except France), USA France RX/TX single frequency Hopping scheme modes in line with standard reduced hopping Power meter (frequency-selective) and power versus time Measurement bandwidth filter definition: passband Filter Bandwidth → wide 2.0 MHz Filter Bandwidth → narrow 1.3 MHz Reference level for full dynamic range GFSK signal RF 1 0 dBm to +41 dBm RF 2 –14 dBm to +33 dBm RF 4 IN –32 dBm to 0 dBm Dynamic range Filter Bandwidth → wide >55 dB, rms Level uncertainty in temperature range +20 °C to +35 °C RF 1, RF 2 from full scale setting down to –25 dB <0.7 dB RF 4 IN from full scale setting down to –25 dB <0.9 dB Level uncertainty in temperature range +5 °C to +45 °C RF1, RF2 from full scale setting down to –25 dB <1.0 dB RF4IN from full scale setting down to –25 dB <1.1 dB in manual mode 0.1 dB Level resolution in remote control mode 0.01 dB Modulation analyzer Measurement bandwidth filter definition: passband Filter Bandwidth → wide 2.0 MHz Filter Bandwidth → narrow 1.3 MHz Level range GFSK signal RF 1, RF 2, RF 4 IN from full scale setting down to –25 dB Total measurement range for frequency offset and frequency deviation –250 kHz to +250 kHz Frequency offset uncertainty in preamble for deviation ≤160 kHz ≤2 kHz Frequency deviation uncertainty in payload for 100 kHz < deviation ≤ 200 kHz 11110000 pattern ≤2 % 10101010 pattern ≤4 %

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 39 Frequency drift uncertainty measured in burst related to frequency offset value in preamble 10101010 pattern maximum ≤2 kHz typically ≤1 kHz in manual mode 1 kHz Frequency resolution in remote control mode 1 Hz Timing measurement Range ±20 μs Resolution ≤0.25 μs Uncertainty ≤0.25 μs + resolution R&S®CMU-B52 option speech codec Speech decoder output SPEECH HANDSET OUT 9-pin D-Sub connector Output impedance <10 Ω Maximum output current 20 mA, peak Full-range output level 1 V, peak Speech coder input SPEECH HANDSET IN 9-pin D-Sub connector Input impedance 100 k Ω low sensitivity 1.4 V, peak Full-range input level high sensitivity 0.1 V, peak

40 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 R&S®CMU-B17 option I/Q/IF interface I/Q interface Analog I/Q outputs IF → I/Q; TX and RX paths, analog I/Q output connector I/Q CH1 I/Q bandwidth 0 MHz to 2.5 MHz –1 V to +1 V, peak Max. output voltage range EMF

22 QI + = 1 V, peak

Output impedance 50 Ω <2 % I and Q amplitude imbalance for WCDMA function group <2.5 % in temperature range +20 °C to +35 °C <4 mV in temperature range +20 °C to +35 °C for WCDMA function group <5 mV Offset voltage in temperature range +5 °C to +45 °C <8 mV Analog I/Q inputs I/Q → IF; TX–path, analog I/Q input connector I/Q CH1 I/Q bandwidth 0 MHz to 2.5 MHz –0.5 V to +0.5 V, peak Max. input voltage range 22 QI + = 0.5 V, peak Input impedance 50 Ω in temperature range +20 °C to +35 °C >40 dB Carrier suppression in temperature range +5 °C to +45 °C >35 dB fI/Q < 1 MHz >45 dB Sideband suppression 1 MHz < fI/Q < 2.5 MHz >40 dB Analog I/Q inputs I/Q → IF; RX path, analog I/Q input connector I/Q CH1 I/Q bandwidth 0 MHz to 2.5 MHz –0.5 V to +0.5 V, peak Max. input voltage range 22 QI + = 0.5 V, peak Input impedance 50 Ω in temperature range +20 °C to +35 °C >35 dB9 Carrier suppression in temperature range +5 °C to +45 °C >35 dB 9 fI/Q < 1 MHz >45 dB Sideband suppression 1 MHz < fI/Q < 2.5 MHz >40 dB Influence on RF interface GSM/EDGE measurements Additional influence on signal quality anal og I/Q input and output considered; for TX and RX paths Phase error GMSK <3°, peak <1°, rms EVM 8PSK <5 %, rms WCDMA measurements 3GPP FDD, UE test Additional influence on signal quality anal og I/Q input and output considered; for TX and RX paths EVM <5 %, rms RF level uncertainty bypass with I/Q IF OUT, I/Q IN/OUT, IF IN/OUT Output level uncertainty at RF 1, RF 2, RF 3 OUT add 0.3 dB to R&S CMU200 base unit specifications Input level uncertainty of frequency- selective power meter at RF 1, RF 2, RF 4 IN add 0.3 dB to R&S CMU200 base unit specifications 9 For GSMK modulation and max. input voltage at I/Q inputs.

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 41 IF interface IF inputs, TX path connector IF3 TX CH1 IN IF level range up to –5 dBm, PEP Standard IF frequencies RF/GSM (GMSK and 8PSK)/ TDMA/CDMA2000 WCDMA

13.85 MHz

15.36 MHz

IF inputs, RX path connector IF3 RX CH1 IN IF level range up to +2 dBm, PEP Standard IF frequencies RF/GSM (GMSK and 8PSK)/ TDMA/CDMA2000 WCDMA IF outputs, TX path connector IF3 TX CH1 OUT IF level range up to –5 dBm, PEP Standard IF frequencies RF/GSM (GMSK and 8PSK)/ TDMA/CDMA2000 WCDMA IF outputs, RX path connector IF3 RX CH1 OUT IF level range up to +6 dBm, PEP Standard IF frequencies RF/GSM (GMSK and 8PSK)/ TDMA/CDMA2000 WCDMA

42 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 Remarks

• Due to the modulation schemes used Bluetoot h and AMPS standards will not be supported.
• The options R&S CMU-B17 and R&S CMU-B73 use the same mainboard connector of the R&S CMU200. Therefore either the R&S CMU-B17 or the R&S CMU-B73 can be ordered for a single instrument. Additional information for GSM: To avoid influences on the fading profile, the following is highly recommended:
• To set all timeslots to the same level.
• To use for the TX signal of the R&S CMU200 the same RF frequencies and RF levels for both TCH and BCCH.
• To switch hopping off. Aspects to be considered if TX or RX signal paths are interrupted: The RF frequency of the R&S CMU200 influences the rotating direction of the I/Q vector. The direction is inverted for f < 1200.1 MHz; this can be compensated for by changing I and Q. R&S CMU200 generator or analyzer RF frequency 100 kHz to 1200.0999999 MHz 1200.1 MHz to 2700.0 MHz R&S CMU200 I/Q output vector inverted rotation swap I output with Q output for proper operation normal rotation R&S CMU200 I/Q input vector inverted rotation swap I input with Q input for proper operation normal rotation The rotating direction must be considered if the R&S CMU200 signal path from the link handler board to the frontend and vice versa is interrupted, i.e. if the signal is not returned to the same R&S CMU200 block after external handling. Examples:
• The rotating direction must not be taken into account if the transmitted signal is routed from the I/Q output of the R&S CMU-B17 to an external fading simulator and then returned to the R&S CMU200 I/Q input (the R&S CMU200 in combination with the Fading Simulator R&S ABFS or R&S SMIQ/SMIQB14, the R&S CMU200 providing the faded RF signal).
• The rotating direction must be considered if the transmitted signal is forwarded to an external fading simulator and is not returned to the I/Q input of the R&S CMU200 (the R&S CMU200 in combination with the R&S SMIQ, the R&S SMIQ providing the faded RF signal). Notes for measuring I/Q/IF signals applied to inputs of the R&S®CMU-B17 option on the R&S®CMU200 RX path:
• The RF spectrum analyzer function (RF function group) cannot be used.
• The displayed RF power levels are not related directly to the applied I/Q/IF voltages. The analyzer settings of the R&S CMU200 RF interface (RF 1, RF 2, RF 4 IN) have to be considered additionally (Analyzer Level → RF Max. Level).
• I/Q inputs have a fixed attenuation of 2 dB; e.g. the RF power meter readout for an applied 500 mV I/Q peak voltage will be 2 dB below the value set in RF Max. Level.
• IF inputs do not have a fixed attenuation. The max. IF input le vel is 2 dBm. The RF power meter readout for the mentioned max. IF signal level (2 dBm) will be 2 dB below the value set in RF Max. Level.
• We recommend switching off the autoranging function.
• RF and IF trigger functions are not possible.
• The WCDMA RF compensation filter is switched of f (I/Q IN/OUT, IF IN/OUT, IFIN_I/Q IN/OUT).
• WCDMA UE test: ACLR/SEM measurement is not applicable.

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 43 R&S®CMU-B41 option audio generator/analyzer AF generator Output impedance <4 Ω Maximum output current 20 mA, peak AF sine generator Frequency range 20 Hz to 20 kHz Frequency uncertainty same as time base + half resolution, see base unit specifications Frequency resolution 0.1 Hz Output level range 10 µV to 5 V at level <10 mV 10 µV Output level resolution at level ≥10 mV 0.1 % Output level uncertainty at level ≥1 mV and frequency ≤10 kHz ≤1.5 % + resolution THD+N10 at level ≥100 mV into load ≥600 Ω ≤0.05 % THD10 at level ≥100 mV into load ≥600 Ω ≤0.025 % AF analyzer Input impedance 1 MΩ ⏐⏐ 100 pF AF voltmeter Frequency range 50 Hz to 20 kHz Level range 50 µV to 30 V at level <1 mV 1 µV Level resolution at level ≥1 mV 0.1 % at 1 mV ≤ level ≤ 2 V <1 % + resolution Level uncertainty at 2 V < level ≤ 20 V <2 % + resolution THD+N meter Measurement bandwidth 21 kHz Frequency range 100 Hz to 10 kHz Level range 10 mV to 30 V Resolution 0.01 % THD+N Inherent distortion at 100 mV ≤ level ≤ 20 V <0.05 % THD+N at 100 mV ≤ level ≤ 2 V <1 % + inherent resolution Uncertainty at 2 V < level ≤ 20 V <2 % + inherent resolution R&S®CMU-U99/B99 option RF1 level range identical to RF2 With the R&S CMU-U99/B99 option installed, the input/output level range and the input/output level uncertainty for RF 1 are the same as for RF 2. With the R&S CMU-U99/B99 option installed, the VSWR of the RF generator and analyzer at RF 1 is as follows: VSWR RF generator and RF analyzer 10 MHz to 2000 MHz <1.2 2000 MHz to 2200 MHz <1.4 RF1 2200 MHz to 2700 MHz <1.6 10 Measurement bandwidth 21.9 kHz

44 R&S

CMU200 Universal Radio Communication Tester Version 08.01, July 2007 The specifications for the R&S CMU200 (Order No. 1100.0008.02/10/30/53) refer to a fully equipped unit with all relevant options installed. Specifications are valid under the following conditions: Data without tolerance limits is not binding. In compliance with the 3GPP/3GPP2 standard, chip rates are specified in Mcps (million chips per second), whereas bit rates and symbol rates are specified in kbps (thousand bits per second) or ksps (thousand symbols per second). Mcps, kbps and ksps are not SI units. For more general information about the R&S CMU200 please refer to the product brochure PD 0758.0039.12, version ≥07.00.

Version 08.01, July 2007 R&S CMU200 Universal Radio Communication Tester 45

DQS REG. NO 1954 QM Certified Environmental System ISO 1 4001 DQS REG. NO 1954 UM For product brochure, see PD 0758.0039.12 and www.rohde-schwarz.com (search term: CMU200) ¸ is a registered trademark of Rohde & Schwarz GmbH & Co. KG · Trade names are trademarks of the owners · Printed in Germany (as) PD 0758.0039.22 · ¸CMU 200 · Version 08.01 · July 2007 · Data without tolerance limits is not binding · Subject to change www.rohde-schwarz.com Europe: +49 1805 12 4242, customersupport@rohde-schwarz.com USA and Canada: 1-888-837-8772, customer.support@rsa.rohde-schwarz.com Asia: +65 65 130 488, customersupport.asia@rohde-schwarz.com