CMS15P03Q8-HF COMCHIP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • Case : SOP-8, molded plastic. - Epoxy : UL 94V-0 rated flame retardant. - Lead Pure tin plated.: - Simple drive requirement. - Low on-resistance. - Fast switching speed. SOP-8 Dimensions in inches and (millimeter) 0.244(6.20) 0.228(5.80) 0.201(5.10) 0.189(4.80) 0.156(3.95) 0.151(3.85) 0.052(1.32) 0.048(1.22) 0.019(0.47) 0.014(0.37) 0.010(0.25) 0.008(0.19) 0.028(0.70) 0.011(0.30) 0.065(1.65) 0.057(1.45) 0.153(3.88) 0.147(3.74) 0.008(0.20) 0.001(0.05) 0.201(5.10) 0.188(4.80) G : Gate S : Source D : Drain Circuit Diagram D D D D 5 6 7 8 4 3 2 1 G S S S REV:C Page 1QW-JTR33

Electrical Characteristics (TA=25°C unless otherwise noted) SymbolParameter Conditions Min Max Unit Drain-source breakdown voltage VGS = 0V, ID = -250µA Zero gate voltage drain current Forward transconductance (Note 1) Turn-on delay time (Note 1&2) Turn-off delay time (Note 1&2) Turn-on r (Note 1&2) ise time Turn-off (Note 1&2) fall time VDS = VGS , ID = -250µA VDS = -24V, VGS = 0V ID = -15A, VGS = -10V VDS = -5V , ID = -15A BVDSS IDSS RDS(on) GFS td(on) tr td(off) tf -2.5 -30 V mΩ S nS Dynamic ID = -10A, VGS = -4.5V 18 Typ Static -1Gate-source threshold voltage VGS(th) Gate-source leakage VGS = ±25V, VDS = 0VIGSS ±100 nA Drain-source on-state resistance (Note 1) µA 7.7 11.4 VDS = -15V, VGS = -10V ID = -15A , RG = 3Ω Rg 3 VGS = 15mV, VDS = 0, f = 1MHZ -1.5 Reverse transfer capacitance Input capacitance Coss Crss VDS = -15V, VGS = 0V, f = 1MHZ ciss 4022 Output capacitance 498 442 pF Total gate charge (Note 1&2) Gate-drain charge (Note 1&2) Gate-soutce charge (Note 1&2) Qg Qgs nC VDS = -15V, VGS = -10VID = -15A, Qgd ID = -10A, VGS = -3V 4020.3 -10VDS = -20V, VGS = 0V, TJ = 125˚C IDSS Gate resistance IS -10 A Continuous source-drain diode current ISM -40Pulse diode forward current (Note 3) Source-Drain Diode IF = IS, VGS = 0V VSD -1.2 VBody diode voltage (Note 1) Recovered charge Qrr Reverse recovery time trr nS nC IF = -10A, dlF/dt = 100A/µs -0.81 RΘJA °C/WThermal resistance Junction to case Junction to ambient (Note 4) RΘJC Source-Drain Diode 2. Independent of operating temperature. 3. Pulse width limited by maximum junction temperature. Notes: 1. Pulse test: Pulse width ≤300µs, Duty cycle ≤ 2% . 4. Width mounted on a 1 in² pad of 2 oz copper, t≤10s; 125°C/W when mounted on minimum copper pad. Total gate charge (Note 1&2) Qg 56VDS = -15V, VGS = 10VID = -15A, VDS = -15V, VGS = 4.5VID = -15A, Comchip Technology CO., LTD. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 2QW-JTR33

Rating and Characteristic Curves (CMS15P03Q8-HF) Drain Current, -ID (A) Fig.1 - Typical Output Characteristics Drain-Source Voltage, -VDS (V) 0 1 2 3 5 100 160 140 VGS=-2.5V Drain Current, -ID (A) 0.1 100 100 101 Fig.2 - Static Drain-Source On-State Resistance VS Drain Current Static Drain-Source On-State Resistance, RDS(ON) ( mΩ ) VGS=-4.5V VGS=-10V Gate-Source Voltage, -VGS (V) 2 4 6 8 0 3015 45 75 Total Gate Charge, Qg (nC) Gate-Source Voltage, -VGS (V) Fig.6 - Gate Charge Characteristics Fig.3 - Static Drain-Source On-State Resistance VS Gate-Source Voltage Static Drain-Source On-State Resistance, RDS(ON), (mΩ) ID=-15A Capacitance , CJ (pF) Drain-Source Voltage, -VDS (V) Fig.4 - Capacitance VS Drain-Source Voltage 1000 10000 100 0.1 10 100 Ciss VDS=-5V Pulsed Ta=25°C 0.01 1 100.1 100 Drain Current, -ID (A) Forward Transfer Admittance, GFS (S) 100 0.1 ID=-15A Fig.5 - Forward Transfer Admittance vs Drain Current 120 VGS=-3V VGS=-10V,-9V,-8V,-7V, -6V,-5V VGS=-4V VGS=-3V ID=-10A VDS=-15V VDS=-5V VDS=-10V Crss Coss Comchip Technology CO., LTD. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 3QW-JTR33

Reel Taping Specification MOSFET B C d D D2SYMBOL (mm) (inch) SYMBOL (mm) E F P P0 P1 W W1 1.75 0.10± 0.069 0.004± 5.50 0.05± 0.217 0.002± 6.40 ± 0.10 0.252 0.004± 5.20 0.10± 0.205 0.004± 2.10 0.10± 0.083 0.004± A 330.00 ± 1.00 100.00 ± 0.50 3.937 ± 0.02012.992 ± 0.039 13.00 0.20± 0.512 0.008± 12.00 + 0.30 - 0.10 0.472 + 0.012 - 0.004 SOP-8 1.50 + 0.10 - 0.00 0.059 + 0.004 - 0.000 17.60 + 1.00 - 0.00 0.693 + 0.039 - 0.000 SOP-8 T C P A d F E W P1 P0 D Comchip Technology CO., LTD. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 4QW-JTR33

SOP-8 4,000 REEL ( pcs ) Reel Size (inch) REEL PACK Standard Packaging Suggested P.C.B. PAD Layout B D C E A SIZE (inch) 0.024 (mm) 0.60 1.52 1.27 0.060 0.050 SOP-8 4.00 0.157 A B C D 7.00 0.276E Comchip Technology CO., LTD. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 5QW-JTR33 XXXX Y = Control code 4409 XXXX Y Pin 1